English
Język Polski
Analytical models tracing deformation of wood-framed walls during vertical transport
DOI:
https://doi.org/10.24425/ace.2021.136465Abstract
Vertical transport of wall-panels is a part of the prefabrication process of wood-framed buildings. The total dead weight of a wall is suspended on several lifting slings, pointwise clasping the top plate of the wall. This indicates, that all the weight of a wall is cumulated in sheathing-to-framing fasteners, usually staples. This article presents experimental investigations and analytical models evaluated for the description of light wood-framed walls in the process of lifting. Three different models cover the analytical approach: a model of a simple beam on elastic supports (BSS), a model of assembled beams (ACBS), three-dimensional (3D) spatial FE model of the wall (WFEM). Board-to-beam joint material parameters are determined on the base of experimental results. These connections are converted into two variants in the form of spring elements for 2D analysis, and beam elements for 3D analysis. The numerical results exhibit that the proposed models may correctly represent behavior of a real wall in lifting, applying elastic materials parameters.References
1. C. S. Hu, C. G. Li, H. X. Liao, K. F. Li, N. X. Dai, Load behaviors of a prefabricated wood framing house during lifting and transportation. Forestry Studies in China 9, 221-224, 2007.
2. O. S. Mohsen, P. Knytl, B. Abdulaal, J. Olearczyk, Simulation of modular building construction. Proceedings of the 2008 Winter Simulation Conference S. J. Mason, R. R. Hill, L. Monch, O. Rose, T. Jefferson, J.W. Fowlereds, 2008.
3. L. M. Ottenhaus, Analytical method to derive overstrength of dowel-type connections, INTER Meeting 51, Tallinn, Estonia, August 2018. Proceedings edited by Rainer Gorlacher, Karlsruhe, Germany, 2018.
4. R. Lemaitre, J. F. Bocquet, M. Schweigler, T. K. Bader, Beam-on-Foundation (BOF), Modelling as an alternative design method for timber joints with dowel‐type fasteners - part 1: Strength and stiffness per shear plane of single‐fastener joints. INTER Meeting 51, Tallinn, Estonia, August 2018. Proceedings edited by Rainer Gorlacher, Karlsruhe, Germany, 2018.
5. R. Jockwer, A. Jorissen, Load-deformation behavior and stiffness of lateral connections with multiple dowel type fasteners. INTER Meeting 51, Tallinn, Estonia, August 2018. Proceedings edited by Rainer Gorlacher, Karlsruhe Germany, 2018.
6. S. Mills, D. Grove, M. Egan, Braking the pre-fabricated ceiling: challenging the limits for modular high-rise, CTBUH, Research paper, New York, 2015.
7. M. Malesza, Cz. Miedziałowski, Discrete analytical model of wood - framed with sheathing building structures and selected experimental test results. Archives of Civil Engineering, XLIX, 2, 2003.
8. J. Malesza, Effective model for analysis of wood-framed timber structures, Archives of Civil Engineering Nr. 2, 2017.
9. J. Malesza, Cz. Miedziałowski, Wybrane aspekty realizacji modułowych szkieletowych budynków drewnianych, Materiały Budowlane 12 (nr 496), 2013.
10. Z. Liu, Z. Gu, Y. Bai, N. Zhong, Intermodal transportation of modular structure units, World Review Intermodal Transport Research, 7(2), 99-123, 2018.
11. M. Dudziak, I. Malujda, K.Talaśka, T. Łodygowski: Analysis of the process of wood plasticization by hot rolling. Journal Of Theoretical And Applied Mechanics 54, 2, Warsaw 2016
12. T. Reynolds, V. Enjily, Timber frame buildings: a guide to the construction proces, UK: BRE Centre for Timber Technology and Construction, 2006.
13. PN-EN 380:1998 - Timber structures. Tests methods - general methods of tests under static loadings.
14. PN-EN 383:2007 - Timber structures. Test methods - Determination of embedment strength and foundation values for dowel type fasteners.
15. PN-EN 384:2010 - Structural timber. Determination of characteristic values of mechanical properties and density.
16. EN 14081-2:2010 - Timber structures. Strength graded structural timber with rectangular cross section. Part 2: Machine grading, additional requirements for initial type testing.
17. EN 14081-3:2012 - Timber structures. Strength graded structural timber with rectangular cross section. Part 3: Machine grading, additional requirements for factory production control.
Downloads
Published
How to Cite
Issue
Section
