English
Język Polski
Analysis of deformations of road embankments founded on displacement columns improving soft subsoil
DOI:
https://doi.org/10.24425/ace.2024.148898Abstract
Drilled displacement columns, constructed in the form of unreinforced or reinforced concrete elements, are currently a very commonly used method of improving soft subsoil, creating an alternative to more expensive pile foundations. A frequently used solution for improving soft soils of road or railway embankments is to design a regular pattern of columns of relatively small diameter. Columns along the perimeter of the improved area are reinforced with rigid steel profiles, while the internal ones are made as concrete elements. Column heads are usually covered with a load transfer platform (layer of compacted granular fill) which is additionally reinforced with geosynthetics. The application of soil improvement with displacement columns is not always successful. It is due to the errors and shortcomings occurring at the design stage, including simplifications in modelling, to construction faults, which may include insufficient experience of contractors and/or improper supervision. Referring to the real object that failed, the article provides the results of numerical parametric analyses taking into account the influence of the key design parameters such as: the stiffness of the load transfer layers, the amount and stiffness of the geosynthetic reinforcement as well as the column spacing. The article presents comparisons of numerical results obtained with the finite element analyses for various approaches to geometry modelling (axisymmetric, 2D and 3D). The simulations indicate that the use of the axisymmetric model of a single column in routine design may lead to the deformations exceeding the serviceability limit states.References
[1] M.S.S. Almeida, M. Ehrlich, A.P. Spotti and M.E.S. Marques, “Embankment supported on piles with biaxial geogrids”, Geotechnical Engineering, vol. 160, no. 4, pp. 185–192, 2007, doi: 10.1680/geng.2007.160.4.185.
[2] J. Chu, S. Varaksin, U. Klotz and P. Mengé, “State of the art report: Construction processes”, in 17th Int. Conf. on Soil Mechanics & Geotechnical Engineering: TC17 meeting ground improvement, Alexandria, Egypt, 7.10.2009, M. Hamza, et al., Eds. IOS Press, 2010, pp. 3006–3135.
[3] B.R. Christopher, Ch. Schwarz and R. Boudreau, FHWA NHI-05-037. Geotechnical aspects of pavements. Washington, D.C., 2006.
[4] J. Han, “Recent research and development of ground column technologies”, Ground Improvement, vol. 168, no. 4, pp. 246–264, 2015, doi: 10.1680/grim.13.00016.
[5] S. Varaksin, B. Hamidi, N. Huybrechts and N. Denies, “Ground improvement vs. pile foundations?”, presented at ISSMGE – ETC 3 International Symposium on Design of Piles in Europe, Leuven, Belgium, 2016, pp. 1–48.
[6] B. Simon, et al., Recommendations for the design, construction and control of rigid inclusion ground improvements (Amélioration des sols par inclusions rigides – ASIRI) National Project. Paris: Presses des Ponts, 2012.
[7] M.D. Larisch, R. Kelly and T. Muttuvel, “Improvement of soft soil formations by drilled displacement columns”, in Ground improvement case histories: Embankments with special reference to consolidation and other physical methods, B. Indraratna, J. Chu, and C. Rujikiatkamjorn, Eds. Oxford: Elsevier, 2015, pp. 573–622.
[8] B. Simon, “General report S5: Rigid inclusions and stone columns”, presented at ISSMGE – TC 211 Int. Symp. on Ground Improvement IS-GI, Brussels, May 31st & June 1st., 2012.
[9] A. Krasiński, “Advanced field investigations of screw piles and columns”, Archives of Civil Engineering, vol. 57, no. 1, pp. 45–57, 2011, doi: 10.2478/v.10169-011-0005-5.
[10] J. Han and M.A. Gabr, “Numerical analysis of geosynthetic reinforced and pile-supported earth platforms over soft soil”, Journal of Geotechnical and Geoenvironmental Engineering, vol. 128, no. 1, pp. 44–53, 2002, doi: 10.1061/(ASCE)1090-0241(2002)128:1(44).
[11] K. Brzeziński and R.L. Michałowski, “Diffused arching in embankments supported by non-compliant columns with capping beams”, Computers and Geotechnics, vol. 132, pp. 1–12, 2021, doi: 10.1016/j.compgeo.2021.104031.
[12] Y. Zhuang, S. Hu, X. Song, H. Zhang andW. Chen, “Membrane effect of geogrid reinforcement for Low highway piled embankment under moving vehicle loads”, Symmetry, vol. 14, no. 10, 2022, doi: 10.3390/sym14102162.
[13] R. Rui, J. Han, Y. Ye, C. Chen and Y. Zhai, “Load transfer mechanisms of granular cushion between column foundation and rigid raft”, International Journal of Geomechanics, vol. 20, no. 1, 2020, doi: 10.1061/(ASCE)GM.1943-5622.0001539.
[14] R.P. Chen, Y.W.Wang, X.W. Ye, X.C. Bian and X.P. Dong, “Tensile force of geogrids embedded in pile-supported reinforced embankment: A full-scale experimental study”, Geotextiles and Geomembranes, vol. 44, no, 2, pp. 157-169, 2016, doi: 10.1016/j.geotexmem.2015.08.001.
[15] S.J.M. van Eekelen, A. Bezuijen, H.J. Lodder and A.F. van Tol, “Model experiments on piled embankments. Part I”, Geotextiles and Geomembranes, vol. 32, pp. 69–81, 2012, doi: 10.1016/j.geotexmem.2011.11.002.
[16] P. Shen, C. Xu and J. Han, “Centrifuge tests to investigate global performance of geosynthetic-reinforced pile-supported embankments with side slopes”, Geotextiles and Geomembranes, vol. 48, no. 1, pp. 120–127, 2020, doi: 10.1016/j.geotexmem.2019.103527.
[17] L. Briançon and B. Simon, “Performance of pile-supported embankment over soft soil: full-scale experiment”, Journal of Geotechnical and Geoenvironmental Engineering, vol. 138, no. 4, pp. 551–561, 2012, doi: 10.1061/(ASCE)GT.1943-5606.0000561.
[18] D.J. King, A. Bouazza, J.R. Gniel, R.K. Rowe and H.H. Bui, “Load-transfer platform behaviour in embankments supported on semi-rigid columns: implications of the ground reaction curve”, Canadian Geotechnical Journal, vol. 54, no. 8, pp. 1158–1175, 2017, doi: 10.1139/cgj-2016-0406.
[19] H.L. Liu, C.W.W. Ng and K. Fei, “Performance of geogrid reinforced and pile-supported highway embankment over soft clay: Case study”, Journal of Geotechnical and Geoenvironmental Engineering, vol. 133, no. 12, pp. 1483–1493, 2007, doi: 10.1061/(ASCE)1090-0241(2007)133:12(1483).
[20] B. Ghosh, B. Fatahi, H. Khabbaz, H.H. Nguyen and R. Kelly, “Field study and numerical modelling for a road embankment built on soft soil improved with concrete injected columns and geosynthetics reinforced platform”, Geotextiles and Geomembranes, vol. 49, no. 3, pp. 804–824, 2021, doi: 10.1016/j.geotexmem.2020.12.010.
[21] B. Chevalier, P. Villard and G. Combe, “Investigation of load transfer mechanisms in geotechnical earth structures with thin fill platforms reinforced by rigid inclusions”, International Journal of Geomechanics, vol. 11, no. 3, pp. 239–250, 2011, doi: 10.1061/(ASCE)GM.1943-5622.0000083.
[22] M.T. Suleiman, L. Ni, C. Davis, H. Lin and S.S. Xiao, “Installation effects of Controlled Modulus Column ground improvement piles on surrounding soil”, Journal of Geotechnical and Geoenvironmental Engineering, vol. 142, no. 1, pp. 1–10, 2016, doi: 10.1061/(ASCE)GT.1943-5606.0001384.
[23] H.H. Nguyen, H. Khabbaz and B. Fatahi, “A numerical comparison of installation sequences of plain concrete rigid inclusions”, Computers and Geotechnics, vol. 105, pp. 1–26, 2019, doi: 10.1016/j.compgeo.2018.09.001.
[24] J. Wehr, M. Topolnicki and W. Sondermann, “Design risks of ground improvement methods including rigid inclusions”, presented at ISSMGE – TC 211 Int. Symp. on Ground Improvement, Brussels, Paper 35–22E, 2012.
[25] J. Han, Principles and practices of ground improvement. New Jersey: J. Wiley & Sons, Inc., 2015.
[26] Plaxis 2D Reference manual, Bentely Systems Incorporated, 2019.
[27] J.J.M. Sluis, F. Besseling and P.H.H. Stuurwold, “Modelling of a pile row in a 2D plane strain FE-analysis”, in Numerical Methods in Geotechnical Engineering, M.A. Hicks, R.B.J. Brinkgreve and A. Rohe, Eds. London: Taylor & Francis Group, 2014, pp. 277–282.
[28] T. Lunne, P.K. Robertson and J.J.M. Powell, Cone penetration testing in geotechnical practice. London: Blackie Academic, Chapman Hall, 1997.
[29] S. Marchetti, P. Monaco, G. Totani and M. Calabrese, “The flat dilatometer test (DMT) in soil investigation”, A Report by the ISSMGE Committee TC16, in Proceedings. International Conference on In-Situ Measurement of Soil Properties. Bali, Indonesia, 2001, pp. 95–132.
[30] M. Khabbazian, V.N. Kaliakin and C.L. Meehan, “Column supported embankments with geosynthetic encased columns: Validity of the unit cell concept”, Geotechnical and Geological Engineering, vol. 33, no. 3, pp. 425–442, 2015, doi: 10.1007/s10706-014-9826-8.
Downloads
Published
How to Cite
Issue
Section
