English
Język Polski
The impact of leg spacing of telecommunication towers on their bending stiffness, total weight, and dynamic properties
DOI:
https://doi.org/10.24425/ace.2025.154116Abstract
The paper presents analyses aimed at determining how the spacing between legs of a steel lattice telecommunication tower affects displacements of its top, its natural frequency, and its self-weight. The critical characteristic of the results is that they were obtained for structures optimized with respect to the load-carrying capacity of their individual components. It was assumed that levels of effort should be kept between 85% and 95%. As far as engineering practice is concerned, the key conclusion is that a larger distance between the legs has a positive impact on the self-weight of the structure. It was demonstrated that a larger leg spacing is related to a smaller self-weight of the tower and thus a smaller quantity of material required. The proposed research and calculation method makes it possible to conclude that providing a larger distance between the legs while optimizing structural members with respect to their effort (preferably by means of an automated process) results in both higher bending stiffness and lower structure self-weight required.References
[1] R.R. Elizalde, “Analysis of the Tower of Hercules, the World’s Oldest Extant Lighthouse”, Buildings, vol. 13, no. 5, 2023, doi: 10.3390/buildings13051219.
[2] H.B. Anangapal, J. Bastin, and B. Krishnan, “Small wind turbines to power telecom towers in Rajasthan, India: A case study”, presented at International Conference on Materials, Energy and Mechanical Engineering, ICME2 2021, 17-18 December 2021, Andhra Pradesh, India.
[3] R. Barros and L. Barros, “Parametric study of lattice towers on the influence of wind action for different typologies of bracing”, in COMPDYN Proceedings, 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2021, 28-30 June 2021, Athens, Greece, doi: 10.7712/120121.8627.20450.
[4] K.D. Tsavdaridis, A. Nicolaou, A.D. Mistry, and E. Efthymiou, “Topology optimisation of lattice telecommunication tower and performance-based design considering wind and ice loads”, Structures, vol. 27, pp. 2379-2399, 2020, doi: 10.1016/j.istruc.2020.08.010.
[5] I.F. Lorenzo, B.C. Elena, P.M. Rodriguez, and V.B.E. Parnas, “Dynamic analysis of self-supported tower under hurricane wind conditions”, Journal of Wind Engineering and Industrial Aerodynamics, vol. 197, art. no. 104078, 2020, doi: 10.1016/j.jweia.2019.104078.
[6] T. Lipecki, M. Gaczek, A. Goliger, G. Kimbar, and W. Węgrzyński, “Characteristic velocity of strong wind for wind engineering purposes”, Archives of Civil Engineering, vol. 69, no. 3, pp. 217-237, 2023, doi: 10.24425/ace.2023.146077.
[7] I. Calotescu, S. Torre, A. Freda, and G. Solari, “Wind tunnel testing of telecommunication lattice towers equipped with ancillaries”, Engineering Structures, vol. 241, art. no. 112526, 2021, doi: 10.1016/j.engstruct.2021.112526.
[8] P. Martin, V.B. Elena, A.M. Loredo-Souza, and E.B. Camano, “Experimental study of the effects of dish antennas on the wind loading of telecommunication towers”, Journal of Wind Engineering and Industrial Aerodynamics, vol. 149, pp. 40-47, 2016, doi: 10.1016/j.jweia.2015.11.010.
[9] P. Martin and A.E. Damatty, “Comparison of the Canadian standard and other standards for wind loading on self-supporting telecommunication towers”, Canadian Journal of Civil Engineering, vol. 48, no. 8, pp. 993-1003, 2021, doi: 10.1139/cjce-2020-0210.
[10] J. Szafran and J. Telega, “Issues related to the assessment of an existing reinforcement of a lattice telecommunication tower”, in Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems – Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation, 5-7 September 2022, Cape Town, South Africa, A. Zingoni, Ed. London: CRC Press, 2022, doi: 10.1201/9781003348443.
[11] Y. Zhuge, J.E. Mills, and X. Ma, “Modelling of steel lattice tower angle legs reinforced for increased load capacity”, Engineering Structures, vol. 43, pp. 160-168, 2012, doi: 10.1016/j.engstruct.2012.05.017.
[12] L. Saufnay, A. Beyer, J.P. Jaspart, and J.F. Demonceau, “Experimental and Numerical Investigations on Closely Spaced Built-Up Angle Members”, Journal of Structural Engineering (United States), vol. 149, no. 4, 2023, doi: 10.1061/JSENDH.STENG-11642.
[13] C. Kumalasari, Y. Ding, M.K.S. Madugula, and F. Ghrib, “Compressive strength of solid round steel members strengthened with rods or angles”, Canadian Journal of Civil Engineering, vol. 33, no. 4, pp. 451-457, 2006, doi: 10.1139/l05-062.
[14] J. Szafran, “An experimental investigation into failure mechanism of a full-scale 40 m high steel telecommunication tower”, Engineering Failure Analysis, vol. 54, pp. 131-145, 2015, doi: 10.1016/j.engfailanal.2015.04.017.
[15] J. Szafran and K. Rykaluk, “A full-scale experiment of a lattice telecommunication tower under breaking load”, Journal of Constructional Steel Research, vol. 120, pp. 160-175, 2016, doi: 10.1016/j.jcsr.2016.01.006.
[16] EN 1993-3-1:2006 Eurocode 3 – Design of steel structures – Part 3-1: Towers, masts and chimneys – Towers and masts. European Committee for standardization, 2006.
[17] EN 1991-1-4:2010 Eurocode 1 – Action on structures – Part 1-4: General actions – Wind actions. European Committee for Standardization, 2010.
[18] EN 1991-1-1:2010 Eurocode 3 – Design of steel structures – Part 1-1: General rules and rules for buildings. European Committee for Standardization, 2005.
[19] M. Matuszkiewicz and R. Pigoń, “Parametric analysis of mast guys within the elastic and inelastic range”, Archives of Civil Engineering, vol. 68, no. 1, pp. 169-187, 2022, doi: 10.24425/ace.2022.140162.
Downloads
Published
How to Cite
Issue
Section
