A novel two-phase interleaved parallel bi-directional DC/DC converter
DOI:
https://doi.org/10.24425/aee.2021.136063Abstract
The energy storage system (ESS) is an important way to improve the power quality of renewable energy sources (such as solar energy and wind energy). A bi-directional DC/DC converter is an essential part of the ESS to achieve bi-directional energy transfer. According to the characteristics of the low-voltage gain and high-voltage stress of switches in the existing bi-directional DC/DC converter, this study proposes a novel two-phase interleaved parallel bi-directional DC/DC converter. The converter can effectively combine the advantages of a Z-source network and interleaved parallel structure. The working principle, the boost mode and buck mode of the converter are analyzed in detail. In addition, the voltage conversion ratios under the two modes are deduced. The control strategy of the two-phase interleaved parallel bi-directional DC/DC converter is introduced in detail. Furthermore, the main working waveforms of the system under each working mode are verified by building a simulation experiment model using MATLAB/Simulink. The simulation results show that the system has advantages of high-voltage gain, low-voltage stress of switches and automatic current sharing between inductors.References
[1] Telukunta V., Pradhan J., Agrawal A., Singh M., Srivani S.G., Protection challenges under bulk penetration of renewable energy resources in power systems: A review, CSEE Journal of Power and Energy Systems, vol. 3, no. 4, pp. 365–379 (2017), DOI: 10.17775/CSEEJPES.2017.00030.
[2] Ortega Á., Milano F., Generalized Model of VSC-Based Energy Storage Systems for Transient Stability Analysis, IEEE Transactions on Power Systems, vol. 31, no. 5, pp. 3369–3380 (2016), DOI: 10.1109/TP-WRS.2015.2496217.
[3] Fan M., Sun K., Lane D., Gu W., Li Z., Zhang F., A Novel Generation Rescheduling Algorithm to Improve Power System Reliability with High Renewable Energy Penetration, IEEE Transactions on Power Systems, vol. 33, no. 3, pp. 3349–3357 (2018), DOI: 10.1109/TPWRS.2018.2810642.
[4] Zhang Z., Zhang Y., Huang Q., Lee W., Market-oriented optimal dispatching strategy for a wind farm with a multiple stage hybrid energy storage system, CSEE Journal of Power and Energy Systems, vol. 4,no. 4, pp. 417–424 (2018), DOI: 10.17775/CSEEJPES.2018.00130.
[5] Yan N., Zhang B., Li W., Ma S.,Hybrid Energy Storage Capacity Allocation Method for Active Distribution Network Considering Demand Side Response, IEEE Transactions on Applied Super conductivity, vol. 29, no. 2, pp. 1–4 (2019), DOI: 10.1109/TASC.2018.2889860.
[6] Jiang W., Zhu C., Yang C., Zhang L., Xue S., Chen W., The Active Power Control of Cascaded Multilevel Converter Based Hybrid Energy Storage System, IEEE Transactions on Power Electronics,vol. 34, no. 8, pp. 8241–8253 (2019), DOI: 10.1109/TPEL.2018.2882450.
[7] Zeng Z., Wang X., Wei Y., Yu Y., Research of bi-directional DC/DC converter topology based on supercapacitor energy storage system in IP transmitter, The Journal of Engineering, vol. 2019, no. 16, pp. 1962–1967 (2019), DOI: 10.1049/joe.2018.8751.
[8] Sun W., Chen Q., Zhang L., Model Predictive Control Based on Cuckoo Search Algorithm of Interleaved Parallel Bi-directional DC–DC Converter, 2019 34rd Youth Academic Annual Conference of Chinese Association of Automation (YAC), Jinzhou of China, pp. 387–391 (2019),DOI: 10.1109/YAC.2019.8787659.
[9] Yang M., Li X.Q., A new control method of balancing inductor current for interleaved parallel bi-directional DC–DC converter, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia), Hefei of China, pp. 2988–2992 (2016), DOI: 10.1109/IPEMC.2016.7512772.
[10] Shen H. Y., Zhang B., Qiu D. Y., Hybrid z-source boost DC–DC converters, IEEE Transactions on Industrial Electronics, vol. 64, no. 1, pp. 310–319 (2017).
[11] Kafle Y. R., Hasan S. U., Town G. E., Quasi-Z-source based bidirectional DC–DC converter and its control strategy, Chinese Journal of Electrical Engineering, vol. 5, no. 1, pp. 1–9 (2019), DOI: 10.23919/CJEE.2019.000001.
[12] Sathyan S., Suryawanshi H. M, Shitole A. B., Soft-switched interleaved DC/DC converter as front-end of multi-inverter structure for micro grid applications, IEEE Transactions on Power Electronics, vol. 33, no. 9, pp. 7645–7655 (2018).
[13] Monteiro V., Ferreira J. C., Nogueiras Meléndez A. A., Couto C., Afonso J. L., Experimental Validationof a Novel Architecture Based on a Dual-Stage Converter for Off-Board Fast Battery Chargers of Electric Vehicles, IEEE Transactions on Vehicular Technology, vol. 67, no. 2, pp. 1000–1011 (2018),DOI: 10.1109/TVT.2017.2755545.
[14] Wang Y., Xue L., Wang C., Wang P., Li W., Interleaved High-Conversion-Ratio Bidirec-tional DC–DC Converter for Distributed Energy-Storage Systems – Circuit Generation, Analysis, and Design, IEEE Transactions on Power Electronics, vol. 31, no. 8, pp. 5547–5561 (2016),DOI: 10.1109/TPEL.2015.2496274.
[15] Galigekere V. P., Kazimierczuk M. K., Analysis of PWM Z-Source DC–DC Converter in CCM for Steady State, IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 59, no. 4, pp. 854–863 (2012), DOI: 10.1109/TCSI.2011.2169742.
[16] Galigekere V. P., Kazimierczuk M. K., Small-Signal Modeling of Open-Loop PWM Z-Source Converter by Circuit-Averaging Technique, IEEE Transactions on Power Electronics, vol. 28, no. 3, pp. 1286–1296 (2013), DOI: 10.1109/TPEL.2012.2207437.
[17] Hu S. D., Liang Z. P., Fan D. Q., Implementation of z-source converter for ultra capacitor-battery hybridenergy storage system for electric vehicle, Transactions of China Electrotechnical Society, vol. 32, no. 8, pp. 247–255 (2017).
[18] Liu J. F., Wu J. L., Qiu J. Y., Switched z-source/quasi-z-source DC–DC converters with reduced passive components for Photovoltaic Systems, IEEE Access, vol. 7, pp. 40893–40903 (2019).
[19] Zhou L. W., Zhou Y. Z., Luo Q. M. ,Interleaved high step-up DC/DC converter, Electric Machines and Control, vol. 18, no. 12, pp. 10–16 (2014).
Downloads
Published
How to Cite
Issue
Section
