Coil-based high-frequency modeling of permanent magnet synchronous machines with single-tooth windings
DOI:
https://doi.org/10.24425/aee.2025.153017Abstract
This paper presents a coil-based model for a permanent magnet synchronous machine (PMSM) with single-tooth windings to analyze the voltage distribution along its stator winding. The model encompasses considerations for the skin effect, the proximity effect of the winding, and parasitic capacitance within the machine. The model is parameterized using impedance measurement results. Subsequently, it undergoes validation in both the frequency and time domains. In the frequency domain, validation is carried out by comparing the measured and simulated impedance spectra. In the time domain, voltage and current signals are recorded from an operating machine on the test bench. The modeled and measured voltage and current signals during switching processes of power electronic devices are compared for validation in the time domain.References
[1] Liu C., Chau K.T., Lee C.H., Song Z., A critical review of advanced electric machines and control strategies for electric vehicles, Proceedings of the IEEE, vol. 109, no. 6, pp. 1004–1028 (2020), DOI: 10.1109/JPROC.2020.3041417.
[2] Deshpande Y.B., Toliyat H.A., Nair S.S., Dhinagar S.J., Immadisetty S., Nalakath S., High-torque density single tooth-wound bar conductor permanent-magnet motor for electric two-wheeler application, IEEE Transactions on Industry Applications, vol. 51, no. 3, pp. 2123–2135 (2014), DOI: 10.1109/TIA.2014.2369822.
[3] Wang Y., Lyu G., Wei J., Zheng Z., He J., Lei J., Chen K.J., Characterization of static and dynamic behavior of 1200 V normally off GaN/SiC cascode devices, IEEE Transactions on Industrial Electronics, vol. 67, no. 12, pp. 10284–10294 (2019), DOI: 10.1109/TIE.2019.2959512.
[4] Lee H., Smet V., Tummala R., A review of SiC power module packaging technologies: challenges, advances, and emerging issues, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 8, no. 1, pp. 239–255 (2019), DOI: 10.1109/JESTPE.2019.2951801.
[5] Zheng D., Lu G., Zhang P., An improved online stator insulation monitoring method based on common mode impedance spectrum considering the effect of aging position, IEEE Transactions on Industry Applications, vol. 58, no. 3, pp. 3558–3566 (2022), DOI: 10.1109/TIA.2022.3160131.
[6] Peng H., Stevic S., Luo Z., Driendl N., Butterweck D., Sharifian L., Firouz Y., Hameyer K., Voltage distribution modeling along stator windings in permanent magnet synchronous machines using coilbased grey box models, IEEE Transactions on Energy Conversion, vol. 39, no. 3, pp. 1994–2007 (2024), DOI: 10.1109/TEC.2024.3370800.
[7] Peng H., Yu Y., Hameyer K., Conductor-based modeling of a single-tooth winding for EMI simulation, IEEE Transactions on Power Electronics, vol. 39, no. 9, pp. 11099–11109 (2024), DOI: 10.1109/TPEL.2024.3403669.
[8] Kono H. et al., Improving the specific on-resistance and short-circuit ruggedness tradeoff of 1.2-kV-class SBD-embedded SiC MOSFETs through cell pitch reduction and internal resistance optimization, 33rd International Symposium on Power Semiconductor Devices and ICs (ISPSD), Nagoya, Japan, pp. 227–230 (2021).
[9] Abdel-Khalik A.S., Diab M.S., Ahmed S., Massoud A.M., A new single tooth winding layout for a single-phase induction motor with segmented stator, 41st Annual Conference of the IEEE Industrial Electronics Society, Yokohama, Japan, pp. 000102–000107 (2015).
[10] Ruiz-Sarrió J.E., Chauvicourt F., Gyselinck J., Martis C., High-Frequency Modelling of Electrical Machine Windings Using Numerical Methods, 2021 IEEE International Electric Machines & Drives Conference (IEMDC), Hartford, CT, USA, pp. 1–7 (2021).
[11] Peng H., Driendl N., Stevic S., Sharifian L., Friouz Y., Butterweck D., Hameyer K., A Study about the Influence of Rotor Position of IPMSM on the Maximum Voltage on Motor Terminals under Inverter-fed Operation, 2023 IEEE 6th Student Conference on Electric Machines and Systems (SCEMS), Aachen, Germany, pp. 1–6 (2023).
[12] Stoll R., The Analysis of Eddy Currents, Clarendon Press (1974).
[13] von Hippel A.R., Dielectric Materials and Applications, Wiley (1954).
Downloads
Published
How to Cite
Issue
Section
