Effect of Bainitisation Temperature on Phase Transformation Kinetics in Silicon-Alloyed Cast Steels

Authors

DOI:

https://doi.org/10.24425/afe.2026.158009

Keywords

Silicon cast steel, Bainite, Austenite, Ferrite, Phase transformation

Abstract

This study investigates the effect of bainitisation temperature on the kinetics of phase transformation and the resulting microstructure in cast steels with two different silicon levels (0.87 wt.% and 2.06 wt.%). Cast steels were produced by induction melting and centrifugal casting. The remaining alloying elements were kept similar between alloys. A combined approach of JmatPRO simulations, high-resolution dilatometry, XRD, SEM, and Vickers hardness testing was used to characterise transformation temperatures, phase fractions, morphology and mechanical response. Results show that silicon exerts both thermodynamic and kinetic influences: thermodynamically, it tends to favour ferrite in equilibrium phase fields, while kinetically, it suppresses carbide precipitation during bainitic transformation, promoting carbon partitioning to austenite and thus increasing the fraction of retained austenite after austempering. Compared to the lower-Si alloy, the higher-Si alloy exhibits a bainitic transformation shifted to lower temperatures, higher hardness in fully transformed and quenched conditions, and larger retained-austenite fractions after isothermal bainitisation. Proper selection of bainitisation temperature in high-silicon cast steels enables favourable mechanical properties while retaining silicon-related benefits such as improved oxidation resistance and tempering stability.

References

[1] Shin, J.-C., Lee, S. & Ryu, J.H. (1999). Correlation of microstructure and fatigue properties of two high-strength spring steels. International Journal of Fatigue. 21(6), 571-579. DOI: 10.1016/S0142-1123(99)00010-9. DOI: https://doi.org/10.1016/S0142-1123(99)00010-9

[2] Qiu, J.-J., Zhang, M., Gao, G.-h., Tan, Z.-l. & Bai, B.-z. (2020). Research and modeling on correlation among microstructure, yield strength and process of bainite/martensite steel. Journal of Iron and Steel Research International. 27(7), 834-841. DOI: 10.1007/s42243-020-00389-x. DOI: https://doi.org/10.1007/s42243-020-00389-x

[3] Dixit, M., Mishra, R.S. & Sankaran. K.K. (2008). Structure–property correlations in Al 7050 and Al 7055 high-strength aluminum alloys. Materials Science and Engineering: A. 478(1-2), 163-172. DOI: 10.1016/j.msea.2007.05.116. DOI: https://doi.org/10.1016/j.msea.2007.05.116

[4] Basu, S., Patra, A., Jaya, B.N., Ganguly, S., Dutta, M. & Samajdar, I. (2022). Study of microstructure-property correlations in dual phase steels for achieving enhanced strength and reduced strain partitioning. Materialia. 25(85005). DOI: 10.1016/j.mtla.2022.101522. DOI: https://doi.org/10.1016/j.mtla.2022.101522

[5] Hamada, A.S., Jaskari, M., Ali, M., Kaijalainen, A. & Järvenpää, A. (2023). Impact of ultra-flash tempering treatment on the microstructure and mechanical properties of high-strength carbon steel. Materials Science Forum. 1105, 53-59. DOI: 10.4028/p-sP4Ffb. DOI: https://doi.org/10.4028/p-sP4Ffb

[6] Delic, A., Oruču, M., Rimac, M., Gigović-Gekić, A. & Sunulahpašić, R. (2019). The influence of solution annealing on microstructure and mechanical properties heat-resistant cast Steel HK30 modified by Niobium. Metallurgical and Materials Engineering. 25(3), 237-245. DOI: 10.30544/430. DOI: https://doi.org/10.30544/430

[7] Bhadeshia, H.K.D.H. (2013). The first bulk nanostructured metal. Science and Technology of Advanced Materials. 14(1), 014202, 1-7. DOI: 10.1088/1468-6996/14/1/014202. DOI: https://doi.org/10.1088/1468-6996/14/1/014202

[8] Bhadeshia, H. K. D. H. (2005). Hard bainite. In J. M. Howe, D. E. Laughlin, J. K. Lee, U. Dahmen, & W. A. Soffa (Eds.), Solid–Solid Phase Transformations in Inorganic Materials (Vol. 1, pp. 469–484). TMS.

[9] Kotesovec, V., Vorel, I., Jenicek, S., Kana, J., Ibrahim, K. (2017). Impact of quenching temperature and isothermal holding time during austempering on bainite content in high-silicon steel. In IOP Conference Series Materials Science and Engineering (Vol. 179, pp. 012041). DOI: 10.1088/1757-899X/179/1/012041. DOI: https://doi.org/10.1088/1757-899X/179/1/012041

[10] Santacruz-Londono, A.F., Rios-Diez, O., Jimenez, J.A., Garcia-Mateo, C. & Aristizabal-Sierra, R. (2020). Microstructural and mechanical characterization of a nanostructured bainitic cast steel. Metals. 10(5), 612, 1-14. DOI: 10.3390/met10050612. DOI: https://doi.org/10.3390/met10050612

[11] Wang, Y., Xu, Y.-B., Zhang, Y.-X., Fang, F., Lu, X., Liu, H.-T. & Wang, G.-D. (2015). Development of microstructure and texture in strip casting grain oriented silicon steel. Journal of Magnetism and Magnetic Materials. 379, 161-166. DOI: 10.1016/j.jmmm.2014.12.043. DOI: https://doi.org/10.1016/j.jmmm.2014.12.043

[12] Stan, S., Riposan, I., Chisamera, M. & Stan. I. (2019). Solidification characteristics of silicon-alloyed ductile cast irons. Journal of Materials Engineering and Performance. 28, 278-286. DOI: 10.1007/s11665-018-3828-2. DOI: https://doi.org/10.1007/s11665-018-3828-2

[13] Alhussein, A., Risbet, M., Bastien, A., Chobaut, J.P., Balloy, D. & Favergeon, J. (2014). Influence of silicon and addition elements on the mechanical behaviour of ferritic ductile cast iron. Materials Science and Engineering: A. 605, 222-228. DOI: 10.1016/j.msea.2014.03.057. DOI: https://doi.org/10.1016/j.msea.2014.03.057

[14] Basso, A., Toda-Caraballo, I., San-Martin, D. & Caballero, F.G. (2020). Influence of cast part size on macro- and microsegregation patterns in a high carbon high silicon steel. Journal of Materials Research and Technology. 9(3), 3013-3025. DOI: 10.1016/j.jmrt.2020.01.052. DOI: https://doi.org/10.1016/j.jmrt.2020.01.052

[15] Setia, P., Venkateswaran, T., Tharian, K.T., Jain, J., Singh, S.S. & Shekhar. S. (2022). Influence of Si content on the microstructure and mechanical properties of silicon stainless steel. Materials Science and Engineering: A. 829, 14214. DOI: 10.1016/j.msea.2021.142141. DOI: https://doi.org/10.1016/j.msea.2021.142141

[16] Akinribide, O.J., Ogundare, O.D., Oluwafemi, O.M., Ebisike, K., Nageri, A.K., Akinwamide, S.O., Gamaoun, F. & Olubambi. P.A. (2022). A review on heat treatment of cast iron: phase evolution and mechanical characterization. Materials. 15(20), 7109, 1-38. DOI: 10.3390/ma15207109. DOI: https://doi.org/10.3390/ma15207109

[17] Chang, S.K., Kim, D.G. & Choi. J.W. (1992). Effects of alloying elements and austenite destabilization heat treatment on graphitization of high chromium cast iron. ISIJ International. 32(11), 1163-1169. DOI: 10.2355/isijinternational.32.1163. DOI: https://doi.org/10.2355/isijinternational.32.1163

[18] Kang, Ch.-Y., Sung, J.-H., Kim, G.-Ho, Kim, B.-S. & Kim. I.-S. (2009). Effect of heat treatment on the damping capacity of austempered ductile cast iron. Materials Transactions. 50(6), 1390-1395. DOI: 10.2320/matertrans.MRA2008427. DOI: https://doi.org/10.2320/matertrans.MRA2008427

[19] Boccardo, A.D., Dardati, P.M., Celentano, D.J., Godoy, L.A., Górny, M. & Tyrała, E. (2016). Numerical simulation of austempering heat treatment of a ductile cast iron. Metallurgical and Materials Transactions B. 47, 566-575. DOI: 10.1007/s11663-015-0511-y. DOI: https://doi.org/10.1007/s11663-015-0511-y

[20] Saunders, N., Guo, U.K.Z., Li, X., Miodownik, A.P. & Schille. J-Ph. (2003). Using JMatPro to model materials properties and behavior. The Journal of The Minerals, Metals & Materials Society. 55(12), 60-65. DOI: 10.1007/s11837-003-0013-2. DOI: https://doi.org/10.1007/s11837-003-0013-2

[21] Kang, G. P., & Lee, K. H. (2008). Calculation of material properties with JMatPro for the process simulation. In Proceedings of the 2008 Spring Conference of the Korean Society for Technology of Plasticity (pp. 142–145).

[22] Garcia de Andres, C., Caballero, F.G., Capdevila, C. & Alvarez, L.F. (2002). Application of dilatometric analysis to the study of solid–solid phase transformations in steels. Materials Characterization. 48(1), 101-111. DOI: 10.1016/S1044-5803(02)00259-0. DOI: https://doi.org/10.1016/S1044-5803(02)00259-0

[23] Jimbert, P., Guraya, T., Kaltzakorta, I., Gutierrez, T., Elvira, R. & Khajavi, L.T. (2022). Different phenomena encountered during dilatometryof low-density steels. Journal of Materials Engineering and Performance. 31(4), 2878-2888. DOI: 10.1007/s11665-021-06418-4. DOI: https://doi.org/10.1007/s11665-021-06418-4

[24] Wang, X., Zurob, H., Xu, G., Ye, Q., Bouaziz, O. & Embury. D. (2012). Influence of microstructural length scale on the strength and annealing behaviour of pearlite, bainite, and martensite. Metallurgical and Materials Transactions A. 44(3), 1454-1461. DOI: 10.1007/s11661-012-1501-1. DOI: https://doi.org/10.1007/s11661-012-1501-1

[25] Marques, M.C.S., de Moura, A.N., de Alcantara, C.M., de Carvalho, F.M.S.B., Bussoloti, R., Labiapari, W.S. & Vatavuk, J. (2023). Microstructure and mechanical properties of a martensitic stainless steel (0.2%C–12%Cr) after quenching and partitioning (Q&P) process. Journal of Materials Research and Technology. 24, 3937-3955. DOI: 10.1016/j.jmrt.2023.04.018. DOI: https://doi.org/10.1016/j.jmrt.2023.04.018

[26] Sakuma, Y., Matsumura, O. & Takechi, H. (1991). Mechanical properties and retained austenite in intercritically heat-treated bainite-transformed steel and their variation with Si and Mn Additions. Metallurgical Transactions A. 22, 489-498. DOI: 10.1007/BF02656816. DOI: https://doi.org/10.1007/BF02656816

[27] Balogun, D., Roman, M., Rex E. Gerald II, L. Bartlett, L., Huang, J. & O’Malley, R. (2023). A study on the impact of silicon and manganese on peritectic behaviour in low alloy steels assisted by mold thermal mapping technology and shell growth measurements. Metallurgical and Materials Transactions B. 54(3), 1326-1341. DOI: 10.1007/s11663-023-02764-x. DOI: https://doi.org/10.1007/s11663-023-02764-x

[28] Caballero, F.G., Miller, M.K., Garcia-Mateo, C., Capdevila, C. & Garcia de Andres, C. (2008). Phase transformation theory: A powerful tool for the design of advanced steels. The Journal of The Minerals, Metals & Materials Society. 60(12), 16-21. DOI: 10.1007/s11837-008-0159-z. DOI: https://doi.org/10.1007/s11837-008-0159-z

[29] Toole, J.K., Benz, J., Vieira, I., Clark, A.J., Thompson, S.W. & Findley, K.O. (2020). Strengthening mechanisms influenced by silicon content in high temperature tempered martensite and bainite. Materials Science and Engineering: A. 786,139419. DOI: 10.1016/j.msea.2020.139419. DOI: https://doi.org/10.1016/j.msea.2020.139419

[30] Kim, B., Boucard, E., Sourmail, T., San Martin, D., Gey, N. & Rivera-Diaz-del-Castillo, P.E.J. (2014). The influence of silicon in tempered martensite: Understanding the microstructure–properties relationship in 0.5–0.6 wt.% C steels. Acta Materialia. 68, 169-178. DOI: 10.1016/j.actamat.2014.01.039. DOI: https://doi.org/10.1016/j.actamat.2014.01.039

[31] Morito, S., Tanaka, H., Konishi, R., Furuhara, T. & Maki, T. (2003). The morphology and crystallography of lath martensite in Fe-C alloys. Acta Materialia. 51(6), 1789-1799. DOI: 10.1016/S1359-6454(02)00577-3. DOI: https://doi.org/10.1016/S1359-6454(02)00577-3

[32] Kinney, C.C., Pytlewski, K.R., Khachaturyan, A.G. & Morris Jr. J.W. (2014). The microstructure of lath martensite in quenched 9Ni steel. Acta Materialia. 69, 372-385. DOI: 10.1016/j.actamat.2014.01.058. DOI: https://doi.org/10.1016/j.actamat.2014.01.058

[33] Stormvinter, A., Miyamoto, G., Furuhara, T., Hedstrom, P. & Borgenstam. A. (2012). Effect of carbon content on variant pairing of martensite in Fe–C alloys. Acta Materialia. 60(20), 7265-7274. DOI: 10.1016/j.actamat.2012.09.046. DOI: https://doi.org/10.1016/j.actamat.2012.09.046

[34] Spanos, G. (1994). The fine structure and formation mechanism of lower bainite. Metallurgical and Materials Transactions A. 25(9), 1967-1980. DOI: 10.1007/BF02649045. DOI: https://doi.org/10.1007/BF02649045

[35] Caballero, F.G., Miller, M.K. & Garcia-Mateo, C. (2014). Influence of transformation temperature on carbide precipitation sequence during lower bainite formation. Materials Chemistry and Physics. 146(1-2), 50-57. DOI: 10.1016/j.matchemphys.2014.02.041. DOI: https://doi.org/10.1016/j.matchemphys.2014.02.041

[36] Azuma, M., Fujita, N., Takahashi, M., Senuma, T., Quidort, D. & Lung, T. (2005). Modelling upper and lower bainite transformation in steels. ISIJ International. 45(2), 221-228. DOI: 10.2355/isijinternational.45.221. DOI: https://doi.org/10.2355/isijinternational.45.221

[37] Furuhara, T., Kawata, H., Morito, S. & Maki, T. (2006). Crystallography of upper bainite in Fe–Ni–C alloys. Materials Science and Engineering: A. 431(1-2), 228-236. DOI: 10.1016/j.msea.2006.06.032. DOI: https://doi.org/10.1016/j.msea.2006.06.032

[38] Yu, X., Wang, Y., Wu, H. & Gong. N. (2024). Ultra-fine bainite in medium-carbon high-silicon bainitic steel. Materials. 17(10), 2225, 1-16. DOI: 10.3390/ma17102225. DOI: https://doi.org/10.3390/ma17102225

[39] Franceschi, M., Bettanini, A.M., Pezzato, L., Dabala, M. & Jacques, P.J. (2021). Effect of multi-step austempering treatment on the microstructure and mechanical properties of a high silicon carbide-free bainitic steel with bimodal bainite distribution. Metals. 11(12), 2055, 1-17. DOI: 10.3390/met11122055. DOI: https://doi.org/10.3390/met11122055

[40] Zhu, J., Sun, X., Barber, G., Han, X. & Qin, H. (2019). Effect of carbon content on bainite transformation kinetics and microstructure of 4140/4150 steels. European Scientific Journal. 15(9), 518-535. DOI: 10.19044/esj.2019.v15n9p518. DOI: https://doi.org/10.19044/esj.2019.v15n9p518

Downloads

Published

2026-07-13

How to Cite

Saraczyn, R., et al. “Effect of Bainitisation Temperature on Phase Transformation Kinetics in Silicon-Alloyed Cast Steels”. Archives of Foundry Engineering, vol. 26, no. 2, July 2026, pp. 212-2, doi:10.24425/afe.2026.158009.

Issue

Vol. 26 No. 2 (2026)

Section

Articles

License

Copyright (c) 2026 Archives of Foundry Engineering

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.