Effect of Fuel Type on Flow-Thermal Field Evolution and Preheating Performance of Scrap in Molten Iron Ladle
DOI:
https://doi.org/10.24425/afe.2026.158017Abstract
Against global carbon neutrality targets, the carbon-intensive steel industry bears severe decarbonization stress, wherein advanced low-carbon smelting technologies dominate its green transition. Scrap preheating boosts scrap ratio and cuts steelmaking carbon emissions; optimized fuel-scrap matching and fuel grading by scrap type significantly improve thermal efficiency and reduce preheating energy demand. This work establishes a 3D numerical model for randomly stacked scrap within a 100-t hot metal ladle to compare natural gas, coke oven gas and converter gas regarding flow field, flame structure, thermal distribution, scrap heating performance and energy efficiency under equal total heat input. Numerical simulations with the k-ε turbulence, EDC combustion and P-1 radiation models are performed to couple flow, heat transfer and combustion. Fuel composition strongly governs flame morphology and thermal behaviors. Natural gas and converter gas form intact, stiff flames, while coke oven gas produces discontinuous unstable flames. Flow intensity decreases in the sequence converter gas, coke oven gas and natural gas, and high-speed turbulent fluctuation of converter gas facilitates heat diffusion. Under the same heating duration, the average surface temperatures of scrap are 695 K, 782 K and 411 K for natural gas, converter gas and coke oven gas, respectively. Converter gas achieves the highest preheating efficiency of 11.2 %, followed by natural gas (5.9 %), and coke oven gas is the lowest (2.4 %) due to its low calorific value. Moreover, fuel-scrap matching characteristics reveal that natural gas is suitable for light and thin scrap to avoid overheating, while converter gas is more favorable for medium and heavy scrap with improved heat penetration. This work reveals the influence mechanism of gas type on ladle scrap preheating and provides theoretical support for fuel selection and process optimization in high-efficiency and low-carbon scrap preheating applications.
References
[1] Cai, X.Y., Duan, H.J., Ding, D.H., Xu, A.J. & Zhang, L.F. (2024). Water modeling on fluid flow and mixing phenomena in a BOF steelmaking converter. Journal of Iron and Steel Research International. 31(3), 595-607. DOI: 10.1007/s42243-023-01072-7.
[2] Burkert, J. & Schwarze, R. (2025). Analysis of surface behavior and cavity oscillations in a liquid metal model experiment of the basic oxygen furnace process. Steel Research International. 96(5), 2300184, 1-9. DOI: 10.1002/srin.202300184.
[3] Quiyoom, A., Ajmani, S.K. & Buwa, V.V. (2018). Optimization of bottom tuyere configuration for basic oxygen furnace steelmaking through experiments and CFD simulations. Chemical Engineering Journal. 346(1), 127-142. DOI: 10.1016/j.cej.2018.03.122.
[4] Tago, Y. & Higuchi, Y. (2003). Fluid flow analysis of jets from nozzles in top blown process. ISIJ international. 43(2), 209-215. DOI: 10.2355/isijinternational.43.209.
[5] Alam, M., Naser, J. & Brooks, G. (2010). Computational fluid dynamics simulation of supersonic oxygen jet behavior at steelmaking temperature. Metallurgical & Materials Transactions B. 41(3), 636-645. DOI: 10.1007/s11663-010-9341-0.
[6] Giannadakis, A., Naxakis, A., Romeos, A., Perrakis, K. & Panidis, T. (2019). An experimental study on a coaxial flow with inner swirl: Vortex evolution and flow field mixing attributes. Aerospace Science and Technology. 94, 105373, 1-16. DOI: 10.1016/j.ast.2019.105373.
[7] Jiang, P., & He, X. (2020). Experimental investigation of flow field characteristics in a mixed-flow trapped vortex combustor. Aerospace Science and Technology. 96, 105533, 1-11. https://doi.org/10.1016/j.ast.2019.105533.
[8] Hu, X., Zhang, J., Yu, Z., Liu, Z., Guo, J. & Xu, C. (2024). Numerical study of the combustion process in the vertical heating flue of air staging coke oven. Processes. 12(10), 2294, 1-19. DOI: 10.3390/pr12102294.
[9] Fan, W., Li, Y., Guo, Q., Chen, C. & Wang, Y. (2017). Coalnitrogen release and NOx evolution in the oxidant-staged combustion of coal. Energy. 125, 417-426. DOI: 10.1016/j.energy.2017.02.130.
[10] Vodička, M., Hrdlička, J. & Skopec, P. (2021). Experimental study of the NOx reduction through the staged oxygen supply in the oxy-fuel combustion in a 30 kWth bubbling fluidized bed. Fuel. 286, 119343, 1-9. DOI: 10.1016/j.fuel.2020.119343.
[11] Zhang, H., Zhou, P. & Yuan, F. (2021). Effects of ladle lid or online preheating on heat preservation of ladle linings and temperature drop of molten steel. Energy. 214, 118896, 1-11. DOI: 10.1016/j.energy.2020.118896.
[12] Poraj, J., Gamrat, S., Bodys, J., Smolka, J. & Adamczyk, W. (2016). Numerical study of air staging in a coke oven heating system. Clean Technologies and Environmental Policy. 18(6), 1815-1825. DOI: 10.1007/s10098-016-1234-8.
[13] Campos, M.G.G., Dos Santos, M.F., Moreira, M.H., Angélico, R.A., Sako, E.Y. & Pandolfelli, V.C. (2020). Holistic view of the insulating layer on the thermal efficiency of a steel ladle lining. International Journal of Ceramic Engineering & Science. 2(3), 113-129. DOI: 10.1002/ces2.10043.
[14] Li, Z., Yi, Q., Zhang, Y., Zhou, H., Zhao, Y., Huang, Y. & Hao, Y. (2020). Numerical study and design strategy for a low emission coke oven system using oxy-fuel combustion of coke oven gas. Journal of Cleaner Production. 252, 119656, 1-15. DOI: 10.1016/j.jclepro.2019.119656.
[15] Li, M.M., Li, L., Li, Q. & Zou, Z.S. (2018). Modeling of mixing behavior in a combined blowing steelmaking. JOM: The Journal of the Minerals, Metals & Materials Society. 70(10), 2051-2058. https://doi.org/10.1007/s11837-018-2889-x.
[16] Liu, Z., Cheng, S. & Peng, J. (2024). Simulation of fluid flow in the top–bottom combined blowing converter. Metals. 14(1), 56, 1-21. DOI: 10.3390/met14010056.
[17] Lv, M., Zhu, R., Guo, Y.G. & Wang, Y.W. (2013). Simulation of flow fluid in the BOF steelmaking process. Metallurgical & Materials Transactions B. 44(6), 1560-1571. DOI: 10.1007/s11663-013-9935-4.
[18] Zhou, Z., Han, X., Wang, X., Yu, J. & Shan, S. (2023). New coefficients of the weighted-sum-of-gray-gases model for gas radiation characteristics of hydrogen/natural gas blends combustion. International Communications in Heat and Mass Transfer. 149, 107090, 1-10. DOI: 10.1016/j.icheatmasstransfer.2023.107090.
[19] Park, Y.K. & Kim, B.S. (2023). Catalytic removal of nitrogen oxides (NO, NO2, N2O) from ammonia-fueled combustion exhaust: A review of applicable technologies. Chemical Engineering Journal. 461, 141958, 1-13. DOI: 10.1016/j.cej.2023.141958.
[20] Calvo, W.A., Dignani, M.L., Galliano, P.G., Brandaleze, E. & Martínez, A.G.T. (2022). Basic slag corrosion of alumina– magnesia–carbon refractory bricks containing Al and Si antioxidants. International Journal of Applied Ceramic Technology. 19(4), 2331-2343. DOI: 10.1111/ijac.14017.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Archives of Foundry Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
