Ultrasonic Crystallization of Monotectic Zn-2%Bi Alloy
DOI:
https://doi.org/10.24425/afe.2024.151313Abstract
In current studies, the authors examined the influence of ultrasonic vibrations on the solidification of Zn – Bi 2% alloy. The research reveals that ultrasonic vibrations have a sufficient influence on the crystallization process. In the case of both groups of ingots (Zn and Zn-2%Bi), the differences in microstructure and mechanical properties could be observed. The methodology was based on the casting of two samples from the same ingot form with identical configurations. One of the samples was used as the reference (cast without ultrasonic) and the other to examine ultrasonic vibrations' influence. Casting with ultrasonic vibration was carried out with a frequency of 35 kHz. Sonotrode was located on the underside of the designed crucible. The samples were circular shape with a diameter of 50 mm and a thickness of 10 mm. A tensile compression test, Vickers microhardness test and microscopy analysis were performed. The results showed enhanced organization of microstructure and the fragmentation of grains in the case of the ingots with the ultrasonic vibration presence.References
[1] Adeleke, A.A., Oki, M., Anyim, I.K., Ikubanni, P.P., Adediran, A.A., Balogun, A.A., Orhadahwe, T.A. Omoniyi, P.O., Olabisi, A.S. & Akinlabi, E.T. (2022). Recent development in casting technology: a pragmatic review. Journal of Composite and Advanced Materials. 32(2), 91-102. DOI: 10.18280/rcma.320206.
[2] Karthika, S., Radhakrishnan, T.K. & Kalaichelvi P, (2016). A review of classical and nonclassical nucleation theories. Crystal Growth & Design. 16(11), 6663-6681. DOI: 10.1021/acs.cgd.6b00794.
[3] Kelton, K.F. Greer, A.L. (2010). Nucleation in condensed matter. Applications in materials and biology. Elsevier.
[4] Qinghua Chen, Ruinan Chen, Jian Su, Qingsong He, Bin Tan, Chao Xu, Xu Huang, Qingwei Dai, & Jian Lu, (2022) The mechanisms of grain growth of Mg alloys: A review, Journal of Magnesium and Alloys. 10(9). 2384-2397. https://doi.org/10.1016/j.jma.2022.09.001.
[5] Tammann, G. & Krige, G.J.B. (1925). Die Gleichgewichtsdrucke von Gashydraten. Zeitschrift für anorganische und allgemeine Chemie. 146(1), 179-195. https://doi.org/10.1002/zaac.19251460112. (in German).
[6] Jian, X., Xu, H., Meek, T.T. & Han, Q. (2005). Effect of power ultrasound on solidification of aluminum A356 alloy. Materials Letters. 59(2-3), 190-193. https://doi.org/10.1016/j.matlet.2004.09.027.
[7] Gang Chen, Ming Yang, Yu Jin, Hongming Zhang, Fei Han, Qiang Chen, & Zude Zhao (2019). Ultrasonic assisted squeeze casting of a wrought aluminum alloy. Journal of Materials Processing Technology. 266, 19-25. DOI: 10.1016/j.jmatprotec.2018.10.032.
[8] Puga, H., Barbosa, J., Seabra, E., Ribeiro, S. & Prokic, M. (2009). The influence of processing parameters on the ultrasonic degassing of molten AlSi9Cu3 aluminium alloy. Materials Letters. 63(9-10), 806-808. DOI: 10.1016/j.matlet.2009.01.009.
[9] Kumar, R., Ansari, Md.S., Mishra, S.S. & Kumar, A. (2014). Effect of ultrasonic mould vibration on microstructure & mechanical properties of pure aluminium casting during solidification. International Journal of Engineering Research & Technology. 3(4), 806-808. ISSN: 2278-0181.
[10] Jian, X., Meek, T.T. & Han, Q. (2006). Refinement of eutectic silicon phase of aluminum A356 alloy using high-intensity ultrasonic vibration. Scripta Materialia. 54(5), 893-896. DOI: 10.1016/j.scriptamat.2005.11.004.
[11] Chebolu, R., Nallu, R. & Chanamala, R. (2022). Experimental investigation on mechanical behavior of as cast Zn-Al-Cu/SiC/TiB2 hybrid metal matrix composite by ultrasonic assisted stir casting technique. Engineering Research Express. 4(2), 025040, 1-9. DOI: 10.1088/2631-8695/ac71f7.
[12] Zhai, W., Liu, H.M. & Wei B. (2015). Liquid phase separation and monotectic structure evolution of ternary Al62.6Sn28.5Cu8.9 immiscible alloy within ultrasonic field. Materials Letters. 141, 221-224. DOI: 10.1016/j.matlet.2014.11.087.
[13] Kaukler, W., Fedoseyev, A. (2002). Report No. NCC8 – 209. NASA.
[14] Zhao Jiuzhou, & Jiang Hongxiang, (2018). Progress in the solidification of monotectic alloys. Acta Metallurgia Sinica. 54(5), 682-700. DOI: 10.11900/0412.1961.2018.00080
[15] Nad, M., Cicmancova, L. (2012). The effect of the shape parameters on modal properties of ultrasonic horn design for ultrasonic assisted machining. In 8th International Daam Baltic Conference Industrial Engineering, 19-21 April 2012 (pp. 57-62). Tallinn, Estonia.
[16] Karthikeyan, P. & Pramanik, S. (2018). Effect of vibration of moulding on the gravity casted specimen during pouring of molten aluminium in metallic mould. Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering. 402 012037, 1-9. DOI: 10.1088/1757-899X/402/1/012037.
[17] Nagasivamuni, B., Wang, G., St John, D.H. & Dargusch, M.S. (2018). The effect of ultrasonic treatment on the mechanisms of grain formation of as cast high purity zinc, Journal of Crystal Growth. 495, 20-28. DOI: doi.org/10.1016/j.jcrysgro.2018.05.006.
[18] Kurgan, A. & Madej, Ł. (2023). Role of crystallographic orientation in material behaviour under nanoindentation: Molecular Dynamics study. Material Science-Poland. 41(3), 18-26. DOI:10.2478/msp-2023-0032.
[19] Wei Zhai, Hanman Liu, Pengfei Zuo, Xiannian Zhu Bingbo Wein, (2015). Effect of power ultrasound on microstructural characteristics and mechanical properties of Al81.3Sn12.3Cu6.4 monotectic alloy. Progress in Natural Science: Materials International. 25(5), 471-477. https://doi.org/10.1016/j.pnsc.2015.10.006.
