3D Phase-field Simulations of Spheroidal Cast Irons and Evaluation of Homogenized Elastic Mechanical Properties
DOI:
https://doi.org/10.24425/afe.2025.153778Abstract
The Volumetric Multicomponent Multiphase Field model implemented in MICRESS® enables microstructure simulation of spheroidal graphite cast iron in 3D space. In this work, it is combined with the homogenization tool HOMAT to study the correlation between graphite characteristics and effective elastic mechanical properties. In a first step, the microstructure evolution of near-eutectic Fe-C-Si-(Mg) grades is simulated from the pure melt to the as-cast structure. The required thermodynamic and diffusion data are evaluated by run-time coupling to CALPHAD data. Temperature evolution is simulated by balancing latent heat release and heat extraction, considering the casting modulus and the mould diffusivity. During the initial solidification, dendritic austenite and spheroidal graphite nucleate and grow independently in the melt. After encapsulation by austenite, the graphite nodules continue to grow by interstitial diffusion of carbon. The eutectoid decomposition of primary austenite to ferrite and graphite is modelled under assumption of para-equilibrium conditions. The final as-cast structure is characterized by graphite nodules of varying size and morphology distributed in a polycrystalline, fully ferritic matrix. To generate representative volume elements (RVE) with different characteristics of graphite precipitates, a series of simulations are performed under independent variation of chemical composition, casting modulus and nucleation conditions. From each RVE, the graphite fraction, the nodule number, the mean nodule size and the mean sphericity are evaluated. In a second step, the RVEs are transferred to the HOMAT software and homogenized values for the Young's modulus, the shear modulus, and the Poisson's ratio are evaluated and discussed in correlation with the characteristic graphite properties and classic mean field approaches.References
[1] Stefanescu, D.M. (2018). A history of cast iron. In George E. Totten (Eds.), ASM Handbook (Vol. 1A, pp. 3–11). ASM International.
[2] Lacaze, J., Sertucha, J., Castro-Román, M. J. (2021). A contemporary monograph on silicon cast irons microstructure-From atom scale to casting (online).
[3] Liu, J. H., Yan, J. S., Zhao, X. B., Fu, B. G., Xue, H. T., Zhang, G. X., & Yang, P. H. (2020). Precipitation and evolution of nodular graphite during solidification process of ductile iron. China Foundry, 17(4), 260-271. DOI:10.1007/s41230-020-0042-2.
[4] Andriollo, T. & Hattel, J. (2016). On the isotropic elastic constants of graphite nodules in ductile cast iron: Analytical and numerical micromechanical investigations. Mechanics of Materials. 96, 138-150. DOI: 10.1016/j.mechmat.2016.02.007.
[5] Tourret, D., Liu, H. & Lorca, J. (2022). Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges. Progress in Materials Science. 123, 100810, 1-19. https://doi.org/10.1016/j.pmatsci.2021.100810.
[6] Chen, L.Q. & Moelans, N. (2024). Phase-field method of materials microstructures and properties. MRS Bulletin. 49(6), 551-555. https://doi.org/10.1557/s43577-024-00724-7.
[7] Steinbach, I., Uddagiri, M., Salama, H., Ali, M.A. & Shchyglo, O. (2024). Highly complex materials processes as understood by phase-field simulations: Additive manufacturing, bainitic transformation in steel and high-temperature creep of superalloys. MRS Bulletin. 49, 583-593. DOI:10.1557/s43577-024-00703-y.
[8] Carré, A., Böttger, B. & Apel, M. (2013). Implementation of an antitrapping current for a multicomponent multiphase-field ansatz. Journal of Crystal Growth. 380, 5-13. DOI: 10.1016/j.jcrysgro.2013.05.032.
[9] Karma, A. (2001). Phase-field formulation for quantitative modeling of alloy solidification. Physical Review Letters. 87(11), 115701, 1-4. DOI:10.1103/PhysRevLett.87.115701.
[10] Eiken, J. (2012). The finite phase-field method - A numerical diffuse interface approach for microstructure simulation with minimized discretization error. Materials Research Society Symposium Proceedings. 1369, 62-68. Materials Research Society. DOI:10.1557/opl.2012.510.
[11] Eiken, J., Böttger, B. & Steinbach, I. (2006). Multiphase-field approach for multicomponent alloys with extrapolation scheme for numerical application. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics. 73(6), 066122, 1-9. DOI:10.1103/PhysRevE.73.066122.
[12] Eiken, J. (2009). A Phase-Field Model for Technical Alloy Solidification. Shaker Verlag.
[13] Fries, S.G., Boettger, B., Eiken, J. & Steinbach, I. (2009). Upgrading CALPHAD to microstructure simulation: the phase-field method. International Journal of Materials Research. 100(2), 128-134. DOI: 10.3139/146.110013.
[14] Deepu, M.J. & Phanikumar, G. (2020). ICME Framework for Simulation of Microstructure and Property Evolution During Gas Metal Arc Welding in DP980 Steel. Integrating Materials and Manufacturing Innovation. 9(3), 228-239. DOI:10.1007/s40192-020-00182-4.
[15] Nomoto, S., Oba, M., Mori, K. & Yamanaka, A. (2017). Microstructure-based multiscale analysis of hot rolling of duplex stainless steel using various simulation software. Integrating Materials and Manufacturing Innovation. 6(1), 69-82. DOI:10.1007/s40192-017-0083-6.
[16] Lesoult, G., Castro, M. & Lacaze, J. (1998). Solidification of spheroidal graphite cast irons—I. Physical modelling. Acta materialia. 46(3), 983-995. https://doi.org/10.1016/S1359-6454(97)00281-4.
[17] Lacaze, J., Castro, M. & Lesoult, G. (1998). Solidification of spheroidal graphite cast irons—II. Numerical simulation. Acta materialia. 46(3), 997-1010. https://doi.org/10.1016/S1359-6454(97)00282-6.
[18] Eiken, J. & Böttger, B. (2018). A multi-phase-field Approach for Solidification with Non-negligible Volumetric Expansion - Application to Graphite Growth in Nodular Cast Iron. Transactions of the Indian Institute of Metals. 71(11), 2725-2729. DOI:10.1007/s12666-018-1427-4.
[19] MICRESS. (2024). Multicomponent multi-phase-field software version 7.250. Retrieved February 26, 2024, from https://micress.rwth-aachen.de/.
[20] Eiken, J. (2020). Calphad-based phase-field study of the interplay between spheroidal graphite growth and chemical segregation in ductile cast iron. In IOP Conference Series: Materials Science and Engineering (Vol. 861, No. 1, p. 012055). Institute of Physics Publishing. DOI:10.1088/1757-899X/861/1/012055.
[21] Eiken, J., Subasic, E. & Lacaze, J. (2020). 3D phase-field computations of microsegregation in nodular cast iron compared to experimental data and Calphad-based Scheil-prediction. Materialia. 9, 100538, 1-11. DOI: 10.1016/j.mtla.2019.100538.
[22] Horbach, L., Gebhardt, C., Zhang, J., Joseph, B. D., Bührig-Polaczek, A. & Broeckmann, C. (2024). The effect of silicon microsegregation on the mechanical properties of high silicon alloyed ductile cast iron under monotonous loading. Heliyon. 10(1), e23904, 1-19. DOI: 10.1016/j.heliyon. 2023.e23904.
[23] Eiken, J. & Lacaze, J. (2017). Microsegregation build-up during solidification of nodular cast iron - Phase-field simulation versus experimental information. Microsegregation build-up during solidification of nodular cast iron-Phase-field simulation versus experimental information. In Proceedings of the 5th Decennial International Conference on Solidification Processing, Old Windsor, UK (pp. 25-28).
[24] Access e.V. (1996). HOMAT-Docs. Retrieved from https://docs.micress.rwth-aachen.de/homat/.
[25] Laschet, G. (2002). Homogenization of the thermal properties of transpiration cooled multi-layer plates. Computer Methods in Applied Mechanics and Engineering. 191(41-42), 4535-4554. https://doi.org/10.1016/S0045-7825(02)00319-5.
[26] Zhou, B., Laschet, G., Eiken, J., Behnken, H. & Apel, M. (2020). Multiscale solidification simulation of Sr-modified Al-Si-Mg alloy in die casting. In IOP Conference Series: Materials Science and Engineering, 22-23 June 2020 (Vol. 861, 1-8). Institute of Physics Publishing. DOI:10.1088/1757-899X/861/1/012034.
[27] Laschet, G. & Apel, M. (2010). Thermo-elastic homogenization of 3-D steel microstructure simulated by the phase-field method. Steel Research International. 81(8), 637-643. DOI:10.1002/srin.201000077.
[28] Boccaccini, A.R. (1997). Young’s modulus of cast-iron as a function of volume content, shape and orientation of graphite inclusions. International Journal of Materials Research. 88(1), 23-26. DOI:10.3139/ijmr-1997-0005.
[29] Fernandino, D.O., Cisilino, A.P. & Boeri, R.E. (2015). Determination of effective elastic properties of ferritic ductile cast iron by computational homogenization, micrographs and microindentation tests. Mechanics of Materials. 83, 110-121. DOI: 10.1016/j.mechmat.2015.01.002.
[30] Grimvall, G. (1997). Cast iron as a composite: conductivities and elastic properties. Advanced Materials Research. 4-5, 31-46. DOI: 10.4028/www.scientific.net/amr.4-5.31.
[31] Speich, G.R., Schwoeble, A.J. & Kapadia, B.M. (1980). Elastic moduli of gray and nodular cast iron. Journal of Applied Mechanics. 47(4), 821-826. DOI:10.1115/1.3153797.
[32] Bührig-Polaczek, A., Broeckmann, C. & Eiken, J. (2023). Experimentally supported modelling of the correlation between metallurgical process control, 3D microstructure development and mechanical properties of pearlitic cast iron with spheroidal graphite. DFG Project 504974025. Aachen.
[33] Thermo-Calc. (2023). TCFE9, TCS Steel/Fe -Alloys Database, Version 3.0.
[34] Thermo-Calc. (2023). MOBFE4, TCS Steel/FE Alloys Mobility Database version 4.
[35] Turnbull, D. (1953). Theory of catalysis of nucleation by surface patches. Acta Metallurgica. 1(1), 1953, 8-14. https://doi.org/10.1016/0001-6160(53)90004-2.
[36] Nellissery Rajan, R. (2024). Experiment-based 3-D phase field simulations of nucleation and growth of graphite nodules in SGI alloys and evaluation of homogenized mechanical properties. Master-Thesis. RWTH, Aachen.
[37] Eiken, J., Böttger, B. & Apel, M. (2023). Diffuse modelling of pearlite growth in Calphad-coupled multicomponent multi-phase-field simulations. IOP Conference Series: Materials Science and Engineering. 1281(1), 012051. DOI:10.1088/1757-899x/1281/1/012051.
[38] Fredriksson, H. & Svensson, I.L. (1984). Computer simulation of the structure formed during solidification of cast iron. MRS Proceedings. 34, 273. DOI: 10.1557/PROC-34-273.
[39] Lekakh, S.N., Zhang, X., Tucker, W., Lee, H.K., Selly, T. & Schiffbauer, J.D. (2020). Micro-CT quantitative evaluation of graphite nodules in SGI. International Journal of Metalcasting. 14(2), 318-327. DOI:10.1007/s40962-019-00354-9.
[40] Access e.V. (2024). HOMAT version 6.004.
[41] Bonora, N., & Ruggiero, A. (2005). Micromechanical modeling of ductile cast iron incorporating damage. Part I: Ferritic ductile cast iron. International Journal of Solids and Structures. 42(5), 1401-1424. DOI: https://doi.org/10.1016/j.ijsolstr.2004.07.025.
[42] Kosteski, L., Iturrioz, I., Batista, R.G. & Cisilino, A.P. (2011). The truss-like discrete element method in fracture and damage mechanics. Engineering Computations (Swansea, Wales). 28(6), 765-787. DOI:10.1108/02644401111154664.
