The Impact of Alloying Additives on the Shrinkage Processes and Corrosion Resistance of Lead-Free Casting Brasses
DOI:
https://doi.org/10.24425/afe.2025.153781Abstract
The article presents a comparative analysis of lead-free brass (CB771) and lead-containing brass (CB770). The study aimed to assess shrinkage processes and corrosion resistance. CB771 samples with modified chemical composition, enriched with zinc, aluminum and tin, were compared with CB770 samples in terms of casting shrinkage and susceptibility to dezincification. Dilatometric analysis revealed that different alloying additives affect shrinkage and dimensional stability at high temperatures in various ways. Aluminum and tin significantly improved resistance to dezincification, while the addition of zinc proved to be less effective. Microscopic examinations confirmed that alloys with aluminium and tin additives have a finer structure, which can translate to higher mechanical properties. The results suggest that lead-free alloys can replace traditional alloys in sanitary applications, reducing the negative impact of lead on the environment and public health.References
[1] Zoghipour, N., Tascioglu, E., Celik, F. & Kaynak, Y. (2022). The influence of edge radius and lead content on machining performance of brass alloys. Procedia CIRP. 112, 274-279. https://doi.org/10.1016/j.procir.2022.09.084.
[2] Hansen, A. (2019). Bleifreier rotguss als armaturen-und installationswerkstoff in der trink wasser installation. METALL Forschung. 73(11), 452-455.
[3] Stavroulakis, P., Toulfatzis, A., Pantazopoulos, G. & Paipetis A. (2022). Machinable leaded and eco-friendly brass alloys for high performance manufacturing processes: a critical review. Metals. 12(2), 246, 1-31. https://doi.org/10.3390/met12020246.
[4] Schultheiss, F., Johansson, D., Bushlya, V., Zhou, J., Nilsson, K. & Ståhl, J-E. (2017). Comparative study on the machinability of lead-free brass. Journal of Cleaner Production. 149, 366-377. https://doi.org/10.1016/j.jclepro.2017.02.098.
[5] Johansson, J., Alm, P., M’Saoubi, R., Malmberg, P., Ståhl, J-E. & Bushlya, V. (2022). On the function of lead (Pb) in machining brass alloys. Journal of Advanced Manufacturing Technology. 120(11), 7263-7275. https://doi.org/10.1007/s00170-022-09205-0.
[6] Umwelt Bundesamt. (2024). Acceptance of metallic materials used for products in contact with drinking water, 4MS Common Approach Part B “4MS Common Composition List”. Retrieved July, 12, 2022 from http://www.umweltbundesamt.de/en/topics/water/drinking-water/distributing-drinking-water/guidelines-evaluation-criteria.
[7] Directive (EU) 2020/2184 of the European Parliament and of the Council of 16 December 2020 on the quality of water intended for human consumption, Dz.U.L 435/1 of 23.12.2020.
[8] Studnicki, A., Jura, S. & Kilarski, J. (1998). The investigation of chromium cast iron on casting dilatometer DO-01/P.Śl. Solidification of Metals and Alloys. 38, 223-228 (in Polish).
[9] Jacobsson, D., Däcker, C.-Å., Sundberg R. & Rod, O. (2010). A general guide for failure analysis of brass. Stockholm. Sweden: Swerea KIMAB, 2010.
[10] Jones, D.A. (1992). Dealloying and dezincification. in principles and prevention of CORROSION. New York: Macmillaian Publishing Company.
[11] Claesson, E. & O. Rod, O. (2016). The effect of alloying elements on the corrosion resistance of brass. Materials Science and Technology. 32(17), 1794-1803. https://doi.org/10.1080/02670836.2016.1254925.
[12] Górny, Z. (1992). Non-ferrous metal casting alloys. Wydawnictwa Naukowo Techniczne. ISBN: 83-204-1270-6. (in Polish).
[13] Radzioch, G., Bartocha, D. & Kondracki, M. (2023). Experimental and numerical comparison of lead-free and lead-containing brasses for fixture application. Archives of Foundry Engineering. 23(3), 124-132. DOI: 10.24425/afe.2023.146672.
