Kinematic and experimental investigation of the mechanical characteristics of a tracker-action pipe organ

Authors

DOI:

https://doi.org/10.24425/ame.2026.12619

Abstract

This paper investigates changes in the operational characteristics of a mechanical tracker-action pipe organ following a comprehensive renovation in 2024. The study focuses on the key actuation force in relation to the mechanical condition of the tracker action and separately examines the effects of wind pressure in the wind chest and mechanical loading introduced by manual couplers. The key and stop actions were analyzed using kinematic diagrams, and their mobility was determined according to classical kinematic theory. Experimental measurements were performed using a digital force gauge. Pre- and post-renovation measurements under identical unpressurized conditions, with the blower switched off, showed a decrease in maximum key actuation force from 4.5 N to 2.3 N (2.2 N reduction), indicating substantially reduced mechanical resistance of the tracker action. Separate post-renovation measurements showed that wind pressure at the reported nominal 75 mm H2O increased the key actuation force by up to 1.9 N, while engagement of manual couplers increased it to 9.4 N. These results demonstrate that mechanical condition, wind pressure, and coupler loading contribute to the key actuation force. Such measurements may provide a quantitative indicator for assessing tracker-action condition and supporting maintenance and renovation of historical pipe organs, although they characterize movement initiation rather than complete force–displacement behavior.

Downloads

Published

19.11.2026

How to Cite

Kądziołka, Tomasz. “Kinematic and Experimental Investigation of the Mechanical Characteristics of a Tracker-Action Pipe Organ”. Archive of Mechanical Engineering, Nov. 2026, pp. 1-28, doi:10.24425/ame.2026.12619.

Issue

Section

Articles

Similar Articles

<< < 2 3 4 5 6 7 

You may also start an advanced similarity search for this article.