Verifying finite-element buckling of columns and plates: an educational study with mode transitions

Authors

DOI:

https://doi.org/10.24425/ame.2026.12678

Abstract

This educational case study shows, step by step, how analytical solutions verify finite-element buckling eigenvalue models for a pinned-pinned Euler-Bernoulli column and a simply supported rectangular plate under uniaxial compression. For the column, a 40-element cubic-Hermite beam model yields a first critical load of 27.634894 kN, compared with 27.634892 kN analytically (5.28 × 10−6% error), allowing students to check the stiffness matrices, sign conventions, and mesh convergence. For the plate, the governing mode is identified by modal minimization and verified with an in-house Q4 flat-shell model (60×40 mesh: 329.645 kN/m, +0.040% versus Navier). An ANSYS SHELL181 refinement from 6×4 to 48×32 elements reduces the first-mode error from 17.42% to 0.547%, and the remaining error is limited mainly by the equal nodal partition of the edge load. The classical transition relation 𝑎/𝑏 = √︁ 𝑚(𝑚 + 1) is used as the reference: both shell models locate the first two mode transitions, which converge to the Mindlin values rather than the thin plate ones (1.4138 for 𝑏/𝑡 = 100 and 1.4030 for 𝑏/𝑡 = 20, instead of √ 2). Learning objectives, documented conventions, and exercises are provided, and the data are openly deposited.

Downloads

Published

19.11.2026

How to Cite

Latrache, Mohamed. “Verifying Finite-Element Buckling of Columns and Plates: An Educational Study With Mode Transitions”. Archive of Mechanical Engineering, Nov. 2026, pp. 1-39, doi:10.24425/ame.2026.12678.

Issue

Section

Articles