Gas-guided rotary-valve shared-nozzle rear-jet device for recoil suppression of high-rate-of-fire rotary-barrel weapons

Authors

DOI:

https://doi.org/10.24425/ame.2026.12693

Abstract

High-rate-of-fire rotary-barrel weapons suffer from severe recoil force accumulation during sustained firing, which poses significant challenges for their integration onto lightweight, rapidly moving platforms such as aircraft and light vehicles. To address this issue, a gas-guided rotary-valve-based shared-nozzle rear-jet control device is proposed. This study investigates the feasibility of synchronized rear-jet operation and its effects on in-bore propellant gas dynamics through numerical simulation. For a 14.5 mm three-barrel rotary weapon, a front-mounted self-locking three-in-one gas diversion device and a rear-mounted rotary valve shared-nozzle system were designed. Incorporating the gas-solid coupled dynamics of the rotary valve, a two-phase interior ballistic modelwas established. The coupled system of partial differential, ordinary differential, and algebraic equations was solved using the MacCormack finite difference scheme and Runge–Kutta methods. Under the present modeling conditions and the selected nominal parameters, the numerical results predict that the recoil reduction efficiency reaches 46.85% over one firing cycle at 3000 rounds/min while limiting muzzle velocity reduction to only 0.85% (from 960.42 m/s to 952.29 m/s). This study provides a preliminary numerical framework and design insight for synchronized shared-nozzle rear-jet control in rotary-barrel weapons.

Downloads

Published

19.11.2026

How to Cite

Qiu, Ming, et al. “Gas-Guided Rotary-Valve Shared-Nozzle Rear-Jet Device for Recoil Suppression of High-Rate-of-Fire Rotary-Barrel Weapons”. Archive of Mechanical Engineering, Nov. 2026, pp. 1-28, doi:10.24425/ame.2026.12693.

Issue

Section

Articles

Similar Articles

<< < 1 2 3 > >> 

You may also start an advanced similarity search for this article.