Statistical Analysis of Properties of Technological Charge and Manufacturing Tolerance of Thin-Walled Sections in Process of Multi-Workstations Roller Bending

Authors

  • P. Tracz PST Consulting Rafał Popiel, Poland
  • K. Wacławiak Silesian University of Technology, Department of Materials Technologies, 8. Krasińskiego Str., 40-019 Katowice, Poland https://orcid.org/0000-0003-2175-1906
  • J. Chrapoński Silesian University of Technology, Department of Materials Technologies, 8. Krasińskiego Str., 40-019 Katowice, Poland https://orcid.org/0000-0002-9964-8688
  • R. Popiel PST Consulting Rafał Popiel, Poland

DOI:

https://doi.org/10.24425/amm.2023.142455

Abstract

The studied collecting electrodes for electrostatic precipitators are cold-rolled formed. Here Sigma 750 open section was manufactured of DC01 steel grade. Length of the electrodes ranged from 8 to 13 meters, all were thin-walled of 1.5 mm. Tolerance of their manufacture is strictly set. A database of material properties, chemical composition, and a set of final tolerance of manufactured profiles has been collected. At first basic statistics for the data has been done. Finally statistical relation between the material composition and profile geometrical tolerance has been studied, next between the material mechanical properties and profile geometrical tolerance has been examined.

Published

2023-06-06

How to Cite

Tracz, P., et al. “Statistical Analysis of Properties of Technological Charge and Manufacturing Tolerance of Thin-Walled Sections in Process of Multi-Workstations Roller Bending”. Archives of Metallurgy and Materials, vol. 68, no. 2, June 2023, doi:10.24425/amm.2023.142455.

Issue

Vol. 68 No. 2 (2023)

Section

Articles