Vol. 68 No. 3 (2023)

Articles

• Effect of Electrode Induction Melting Gas Atomization Process on Fine Powder Yields: Continuous Metal Melt Flow

  Jialun Wu, Min Xia, Junfeng Wang, Changchun Ge

• Electronic, Optical and Transport Properties of HfNiSn under Mn impurity

  M. Mirmehdi, A. Boochani, S.R. Masharian

• Multi-Response Optimization of Electrical Discharge Machining of 17-4 PH SS Using Taguchi-Based Grey Relational Analysis

  E. Gerçekcioğlu, M. Albaşkara

• Effect of Cyclic Heat Treatment on Microstructure Evolution of TA15 Titanium Alloy

  Dan-Ya Zhang, Zhi-Sheng Nong, Tian-Xing Wang

• Investigation on Structural, Electronic, Thermal and Thermoelectric Properties of Al0.25B0.75As Alloy Under Pressure, Based on Density Functional Theory (DFT)

  A. Fazeli Kisomi, S.J. Mousavi, B. Nedaee-Shakarab

• Microstructure Evolution, Phase Composition, Tensile and Hardness Properties Investigation of CrCuFeNi2Tix-Based High-Entropy Alloys

  Long Chen

• Acidic Corrosion Behaviour of Niobium-Added Welding Overlays Fabricated by Self-Shielded Metal-Cored Wires

  Dashuang Liu, Yucheng Wu, Weimin Long, Ping Wei, Rui Wang, Wei Zhou

• Investigation of Hardfacing Deposits Obtained by Using Submerged Arc Welding Fluxes Containing High-Carbon Ferrochromium and Ferroboron

  M. Kaptanoglu, M. Eroglu

• Study on Microstructure and Mechanical Properties of Friction Stir Welding Joints of In-Situ Al3Zr/AA6082 Particle-Reinforced Aluminum Matrix Composites

  Hui Li, Caizhi Sun, Feng Wang, Yuanpeng Qiao, Chuying Li, Pinyi Xu, Andrii Zatulovskiy, Volodymyr Shcheretskyi

• Research on Reducing Residual Stress in Milling of Aluminum Alloy

  Yao Huang, Xianguo Yan, Ruize Yuan, Zhi Chen, Liang Tang, Ao Shen, Xuemei Niu

• Tests of Mechanical and Thermal Deformation of Moulding Sands Produced in Various Technologies

  A. Grabarczyk, K. Major-Gabryś, J. Jakubski, St.M. Dobosz, D. Bolibruchová, R. Pastirčák

• Influence the Composition of the Core Mixture to the Occurrence of Veinings on Castings of Cores Produced by Cold-Box-Amine Technology

  P. Delimanová, I. Vasková, M. Bartošová, M. Hrubovčáková

• XRD and STA Characterization of Phosphate Layers Deposited on the Carbon Steel Surface

  D.-P. Burduhos-Nergis, C. Bejinariu, A.M. Cazac, A.V. Sandu, P. Vizureanu

• Modelling the Natural Gas Transportation Process using the Factorial Experiment Method

  Mihail Aurel Țîțu, A.B. Pop, M. Nabiałek

• Verification of the Random Nature of the Experimental Data in the End-Milling Process of Aluminum Alloys

  A.B. Pop, Mihail Aurel Țîțu

• Combined 3-Components Phosphate and Organic Coatings on Zinc Surfaces

  D. Fachikova, T. Liubenova, G. Ilieva

• A Short Review on the Influence of Antimony Addition to the Microstructure and Thermal Properties of Lead-Free Solder Alloy

  Nur Syahirah Mohamad Zaimi, Mohd Arif Anuar Mohd Salleh, Mohd Mustafa Al Bakri Abdullah, Mohd Izrul Izwan Ramli

• Influence of Sintering Temperature on the Pore Structure of an Alkali-Activated Kaolin Based Geopolymer

  M.I.I. Ramli, M.A.A.M. Salleh, I.H. Aziz, N.S.M. Zaimi, S.F.M. Amli, M.M.A.B. Abdullah

• The Properties of Ground Granulated Blast Furnace Slag Lightweight Aggregate (GLA) at Various Molar Ratio and Its Application in Concrete

  R.A. Razak, M.A. Hassan, M.M.A.B. Abdullah, Z. Yahya, M.A.M. Ariffin, A.F.B. Mansor, D.L.C. Hao

• Study of the Effect of Intensity of Vibrations and Temperature on the Cooling Characteristics of Quenching Media

  M.C. Perju, C. Nejneru, D.D. Burduhos-Nergis, P. Vizureanu, M.G. Minciuna, A.V. Sandu

• Study on The Emulsion Stability of Tripropylene Glycol Diacrylate in Water

  S.S.M. Shirajuddin, M.M. Al Bakri Abdullah, C.M.R. Ghazali, K. Hussin, M.F.A. Rahman

• Application of Improved b-Value and Clustering Analysis for Structural Integrity Assessment of CFRP Specimen under Tensile Loading

  M. Šofer, P. Kwiatoń, P. Pavlíček

• Analysis of the Effect of the Excess Air Combustion Ratio on the Loss of Steel and Scale Adhesion in the Process of Heating the Steel Charge Including Changes in Technology

  T. Wyleciał, J. Boryca, D. Urbaniak

• Phosphate Conversion Coating – A Short Review

  D.-P. Burduhos-Nergis, A.V. Sandu, D.D. Burduhos-Nergis, P. Vizureanu, C. Bejinariu

• Wettability and Hardness Investigation of Nickel-Coated Precipitated Calcium Carbonate Sn-9Zn Composite Solder

  L.W. Keong, F.F. Zainal, M.Z. Kasmuin, A.A. Mohamad, M.F.M. Nazari, M. Nabiałek, B. Jeż

• Influence of Salinity of Mixing Water Towards Physical and Mechanical Properties of High Strength Concrete

  R.A. Razak, K. Yen Ng, M.M. Al Bakri Abdullah, Z. Yahya, R. Mohamed, K. Muthusamy, W.A.W. Jusoh, M. Nabiałek, B. Jeż

• Infrared Imaging as a Non-Destructive Testing Method for Geopolymer Concrete

  Andri Kusbiantoro, A.H. Ismail, S.K. Jema’in, K. Muthusamy, F.F. Zainal

• Investigation of Beam Welding Technologies Effect on the Properties of Welded Joints of S960MC Steel

  M. Mičian, M. Frátrik, J. Bárta

• Substrate Texture Influence on the Dry Sliding Wear Behaviour of Co-Based Plasma Spray Coating

  D. Cristisor, D.L. Chicet, C. Cirlan Paleu, C. Stescu, C. Munteanu

• Investigation of Mechanical, Physical and Durability Properties of Metakaolin-Based Geopolymer

  W.M.W. Ibrahim, M. Ibrahim, M.Z.A. Azis, M.M. Al B. Abdullah, A.S. Sauffi, A. Romisuhani, S.H. Adnan

• The Influence of Foaming Agent Towards Metakaolin Based Alkali Activated Materials Properties and Cu2+ Adsorption

  M. Ibrahim, W.M.W. Ibrahim, M.M. Al B. Abdullah, L.H. Mahamud, M.N.N. Tajuddin, Nur Faezah Yahya

• Similarity Solution for Phase Change of Dilute Binary Isomorphous Alloy with Density Variation during Phase Change

  A. Jakhar, L. Sharma, P. Rath, S. Kumar Mahapatra

• Comparison of Microstructure, Ageing Effect and Shape Memory Properties of Additively Manufactured NiTi Alloy using LENS and EBAM Methods

  J. Dutkiewicz, Ł. Rogal, M. Węglowski, T. Czujko, T. Durejko, E. Cesari

• PAN-Based Carbon Fibers Deposition on NiTi Surface

  T. Goryczka, B. Szaraniec, E. Stodolak-Zych, S. Kluska

• Synthesis of Ti-Nb-Zr Alloys Combined Powder Metallurgy and Arc Melting Methods

  I. Matuła, G. Dercz, K. Prusik, M. Szklarska, A. Kazek-Kęsik, W. Simka, E. Sudoł

• Lorentz TEM and LM-STEM DPC Analysis of Magnetic Domains in Soft Ferromagnets

  P. Czaja

• Effect of Milling Time on Crystallization Sequence and Microstructure of NiTi Alloys Produced Via High-Energy Ball Milling

  T. Goryczka, G. Dercz

• Nonwoven Carbon Fibers with Nanometric Metallic Layers as a Tool to Monitor Regenerative Processes

  E. Stodolak-Zych, M. Kudzin, K. Kornaus, M. Gubernat, E. Kaniuk, M. Bogun

• The Influence of γ' Precipitates on the Structural Stability of FeNiCoAlTa and FeNiCoAlTaB Single Crystals After Cyclic Superelastic Deformation

  A. Wójcik, R. Chulist, A. Szewczyk, J. Dutkiewicz, Wojciech Maziarz

• TEM, HREM, L-TEM Studies of Fe-Based Soft Magnetic Melt-Spun Ribbons Subjected to Ultra-Rapid Annealing Process

  Wojciech Maziarz, A. Kolano-Burian, M. Kowalczyk, P. Błyskun, R. Chulist, P. Czaja, M. Szlezynger, A. Wójcik

• Precise Orientation Control of Single Crystalline NiMnGa-Based Alloys by in-situ EBSD Analysis

  A. Szewczyk, M. Faryna, A. Wójcik, Wojciech Maziarz, R. Chulist

• ZnO Nanowires Grown on Al2O3-ZnAl2O4 Nanostructure Using Solid-Vapor Mechanism

  W. Zajkowska-Pietrzak, J. Turczyński, B. Kurowska, H. Teisseyre, K. Fronc, J. Dąbrowski, S. Kret

• Role of Nitrogen During Dry-Air Oxidation of TiAlNbCrSi Alloy Produced with Mould Casting (MC) and Electron Beam Melting (EBM)

  J. Morgiel, T. Dudziak, L. Maj, A. Kirchner, M. Pomorska, B. Klöden, T. Weissgärber, D. Toboła

• Investigation of Mechanical Properties of Accelerated Cooled and Self-Tempered H-Type Structural Sections

  A. Işıkgül, H. Ahlatci, İ. Esen, Y. Türen, O. Yağız

• Influence of Dissolved Oxygen Content on the Properties of Aqueous Milled WC-Co Powders

  H.-F. Chicinas, L.-E. Marton, C.-O. Popa