Computational fluid dynamics analysis of several designs of a Curtis wheel
DOI:
https://doi.org/10.24425/ather.2021.138116Abstract
In small steam turbines, sometimes the efficiency is not as important as the cost of manufacturing the turbine. The Curtis wheel is a solution allowing to develop a low output turbine of compact size and with a low number of stages. This paper presents three fully dimensional computational fluid dynamics cases of a Curtis stage with full and partial admission. A 1 MW steam turbine with a Curtis stage have been designed. The fully admitted stage reaches a power of over 3 MW. In order to limit its output power to about 1 MW, the partial admission was applied. Five variants of the Curtis stage partial admission were analyzed. Theoretical relations were used to predict the partial admission losses which were compared with a three-dimensional simulations. An analysis of the flow and forces acting on rotor blades was also performed.References
[1] Achille M., Cardarelli S., Pantano F., Zito M.: Design and CFD analysis of a Curtis turbine stage. In: Proc. 29th Int. Conf. on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems, ECOS 2016, Portorož, June 19–23, 2016.
[2] Rashid S., Tremmel M., Waggott J., Moll R.: Curtis stage nozzle/rotor aerodynamic interaction and the effect on stage performance. J. Turbomach. 129(2007), 3, 551–562
[3] Perycz S.: Steam and Gas Turbines. Ossolineum, Wrocław 1992.
[4] Surwilo J., Lampart P., Szymaniak M.: CFD analysis of fluid flow in an axial multi-stage partial-admission ORC turbine. Open Eng. 5(2015), 1, 360–364.
[5] Kosowski K., Piwowarski M., Włodarski W., Stepien R.: A multistage turbine for a micro power plant. In: Proc. IFToMM Int. Symp. on Dynamics of Steam and Gas Turbines (R. Rzadkowski, Ed.), Gdansk, 1-3 Dec., 2009, Wydawn. IMP PAN, Gdansk 2009, 283–290.
[6] Pan Y., Yuan Q., Zhu G.: Numerical Investigation on the Influence of Inlet Structure on Partial-admission Losses. Proc. Chin. Soc. Electr. Eng. 38(2018), 14, 4156– 4164.
[7] Sakai N., Harada T., Imai Y.: Numerical study of partial admission stages in steam turbine. JSME Int. J. B-Fluid T. 49(2006), 2, 212–217.
[8] Lampart P., Szymaniak M., Rzadkowski R.: Unsteady load of partial admission control stage rotor of a large power steam turbine. In Proc. ASME Turbo EXPO 2004, Power for Land, Sea and Air, Vienna, June 14–17, 2004, ASME GT-2004- 53886, 2004.
[9] Koprowski A., Rzadkowski R.: Computational fluid dynamics analysis of 1 MW steam turbine inlet geometries. Arch. Thermodyn. 42(2021), 1, 35–55.
[10] Rusanov A., Rusanov R.: The influence of stator-rotor interspace overlap of meridional contours on the efficiency of high-pressure steam turbine stages. Arch. Thermodyn. 42(2021), 1, 97–114.
[11] Dejch M.E., Filippov G.A., Lazarev L.Ja.: Collection of Profiles for Axial Turbine Cascades. Machinostroienie, Moscow 1965 (in Russian).
[12] Neuimin V.M.: Methods of evaluating power losses for ventilation in stages of steam turbines of TES. Therm. Eng.+ 61(2014), 10, 765–770.
[13] Ansys CFX, Release 18.2.
[14] Ansys DesignModeller, Release 18.2.
[15] Ansys TurboGrid, Release 18.2.
[16] Ansys CFX, Release 18.2, CFX documentation.
[17] Wagner W., Pruss A.: The IAPWS formulation 1995 for the thermodynamic properties of ordinary water substance for general and scientific use. J. Phys. Chem. Ref. Data 31(2002), 2, 387–535
