Unsteady flow of silica nanofluid over a stretching cylinder with effects of different shapes of nanoparticles and Joule heating
DOI:
https://doi.org/10.24425/ather.2024.151222Abstract
Indeed, nanofluids have garnered significant interest in various fields due to their numerous advantages and potential applications. The appeal of SiO2 nanofluid, in particular, lies in its low preparation cost, simple production process, controlled chemistry, environmental safety and its exceptional ability to be homogeneously suspended in the base fluid, which makes it a promising candidate for a variety of applications. In this study, we investigate the flow analysis of a water based silicon dioxide nanofluid, passing over a stretched cylinder while subjected to a continuous magnetic field, including Joule heating effects. The research involves the development of a mathematical model and the formulation of governing equations represented as partial differential equations. These equations are subsequently transformed into non-linear ordinary differential equations through suitable transformations. To obtain a numerical solution, the MATLAB bvp4c solver technique is employed. The study investigates the implications of dimensionless parameters on velocity and thermal distributions. It is observed that the velocity distribution f'(η) exhibits a direct relationship with the volumetric fraction ϕ and an inverse relationship with the unsteadiness parameter S, the magnetic parameter M, and the temperature distribution θ(η) shows an enhancement for the increasing ϕ and M, as well as the Eckert number. However, it declines against S and the Prandtl number. The results for local Nusselt number and skin frictions are depicted in Tables.References
[1] Choi, S.U. & Eastman, J.A., (1995). Enhancing thermal conductivity of fluids with nanoparticles. ASME, 1995 International Mechanical Engineering Congress and Exposition, 12−17 November, San Francisco, CA, United States.
[2] Talib, S.F.A. Azmi, W.H., Zakaria, I., Mohamed, W., Mamat, A.M.I., Ismail, H., & Daud, W.R.W. (2015). Thermophysical Properties of Silicon Dioxide (SiO2) in Ethylene Glycol/Water Mixture for Proton Exchange Membrane Fuel Cell Cooling Application. Energy Procedia, 79, 366–371. doi: 10.1016/j.egypro.2015.11.504
[3] Alsarraf, J., Alnaqi, A.A., & Al-Rashed, A.A.A.A. (2022). Effect of nanoparticles shape on the cooling process of a lithium ion battery in geometry with capillary channels in the presence of phase change material. Journal of Energy Storage, 48, 103998.doi: 10.1016/j.est.2022.103998
[4] Akram, J., Akbar, N.S., & Tripathi, D. (2020). Comparative study on ethylene glycol based Ag-Al2O3 and Al2O3 nanofluids flow driven by electroosmotic and peristaltic pumping: a nano-coolant for radiators. Physica Scripta, 95(11), 115208. doi: 10.1088/1402-4896/abbd6b
[5] Camara, S., & Sulin, A.B. (2022). Study of a double-acting solar collector for use in the absorption cooling system in hot regions. Thermal Science and Engineering Progress, 31, 101286. doi:10.1016/j.tsep.2022.101286
[6] Abdullatif Alshuhail, L., Shaik, F., & Syam Sundar, L. (2023). Thermal efficiency enhancement of mono and hybrid nanofluids in solar thermal applications – A review. Alexandria Engineering Journal, 68, 365−404. doi:10.1016/j.aej.2023.01.043
[7] Ma, M., Xie, M., & Ai, Q. (2022). Simulation on influences of Al2O3 nanofluids as coolant for nuclear power plant based on modified empirical formula of nanofluids thermal properties at high temperature and high pressure. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44(1), 454–468. doi: 10.1080/15567036.2022.2046213
[8] Arif, M., Di Persio, L., Kumam, P., Watthayu, W., & Akgül, A. (2023). Heat transfer analysis of fractional model of couple stress Casson tri-hybrid nanofluid using dissimilar shape nanoparticles in blood with biomedical applications. Scientific Reports, 13(1),4596. doi: 10.1038/s41598-022-25127-z
[9] Akram, S., Athar, M., Saeed, K., Razia, A., Muhammad, T., & Ahmed Alghamdi, H. (2023). Mathematical simulation of double diffusion convection on peristaltic pumping of Ellis nanofluid due to induced magnetic field in a non-uniform channel: Applications of magnetic nanoparticles in biomedical engineering. Journal of Magnetism and Magnetic Materials, 569,170408. doi: 10.1016/j.jmmm.2023.170408
[10] Crane, L.J. (1970). Flow past a stretching plate. Zeitschrift für angewandte Mathematik und Physik, 21(4), 645−647. doi:10.1007/BF01587695
[11] Ahmed, J., Shahzad, A., Khan, M., & Ali, R. (2015). A note on convective heat transfer of an MHD Jeffrey fluid over a stretching sheet. AIP advances, 5(11), 117117. doi: 10.1063/1.4935571
[12] Hayat, U., Ali, R., Shaiq, S., & Shahzad, A. (2023). A numerical study on thin film flow and heat transfer enhancement for copper nanoparticles dispersed in ethylene glycol. Reviews on Advanced Materials Science, 62(1), doi: 10.1515/rams-2022-0320
[13] Yang, H., Haya, U., Shaiq, S., Shahzad, A., Abbas, T., Naeem, M., Khan, S.U., Labidi, T., Kolsi, L., & Zahid, M.A. (2023). Thermal inspection for viscous dissipation slip flow of hybrid nanofluid (TiO2–Al2O3/C2H6O2) using cylinder, platelet and blade shape features. Scientific Reports, 13(1), 8316. doi:10.1038/s41598-023-34640-8
[14] Shaiq, S., Maraj, E.N., & Shahzad, A. (2023). An unsteady instigated induced magnetic field’s influence on the axisymmetric stagnation point flow of various shaped copper and silver nanomaterials submerged in ethylene glycol over an unsteady radial stretching sheet. Numerical Heat Transfer, Part A: Applications, 85(6), 822−844. doi: 10.1080/10407782.2023.-2193351
[15] Khan, Q., Farooq, M., & Ahmad, S. (2024). Generalized transport analysis on mixed convection squeeze flow of a Casson fluid over an inclined stretching sheet with viscous dissipation and double stratification. Ain Shams Engineering Journal, 15(1), 102253.doi: 10.1016/j.asej.2023.102253
[16] Jabeen, K., Mushtaq, M., Mushtaq, T., & Muntazir, R.M.A. (2023). A numerical study of boundary layer flow of Williamson nanofluid in the presence of viscous dissipation, bioconvection, and activation energy. Numerical Heat Transfer, Part A: Applications, 85(3), 378−399. doi: 10.1080/10407782.2023.-2187494
[17] Othman, H.A., Ali, B., Jubair, S., Yahya Almusawa, M., & Aldin, S.M. (2023). Numerical simulation of the nanofluid flow consists of gyrotactic microorganism and subject to activation energy across an inclined stretching cylinder. Scientific Reports, 13(1),7719. doi: 10.1038/s41598-023-34886-2
[18] Hayat, U., Shaiq, S., & Shahzad, A. (2023). A Comparative Study of Thin Film Flow of Fe3O4 and Al2O3 Nanoparticles over Stretching Surface Under the Effect of Viscous Dissipation and Magnetohydrodynamics (MHD). Preprint from Research Square.doi: 10.21203/rs.3.rs-2693183/v1
[19] Hayat, T., Razaq, A., Khan, S.A., & Alsaedi, A. (2023). Radiative flow of rheological material considering heat generation by stretchable cylinder. Case Studies in Thermal Engineering, 44,102837. doi: 10.1016/j.csite.2023.102837
[20] Khan, W.A., & Pop, I. (2010). Boundary-layer flow of a nanofluid past a stretching sheet. International Journal of Heat and Mass Transfer, 53(11), 2477−2483. doi: 10.1016/j.ijheatmasstransfer.2010.01.032
[21] Chen, C.-H. (2004). Combined heat and mass transfer in MHD free convection from a vertical surface with Ohmic heating and viscous dissipation. International Journal of Engineering Science, 42(7), 699−713. doi: 10.1016/j.ijengsci.2003.09.002
[22] Cao, J., Cheng, P., & Hong, F. (2009). Applications of electrohydrodynamics and Joule heating effects in microfluidic chips: A review. Science in China Series E: Technological Sciences,52(12), 3477−3490. doi: 10.1007/s11431-009-0313-z
[23] Hayat, T., Imtiaz, M., & Alsaedi, A. (2016). Melting heat transfer in the MHD flow of Cu–water nanofluid with viscous dissipation and Joule heating. Advanced Powder Technology, 27(4),1301−1308. doi: 10.1016/j.apt.2016.04.024
[24] Maraj, E.N., Faizan, U., & Shaiq, S. (2019). Influence of Joule heating and Partial Slip on Casson Nanofluid Transport Past a Nonlinear Stretching Planar Sheet. International Conference on Applied and Engineering Mathematics (pp. 31−36), 27−29 Aug., Taxila, Pakistan. doi: 10.1109/ICAEM.2019.8853731
[25] Khashi'ie, N.S., Arifin, N.M., Pop, I. & Wahid, N.S. (2020). Flow and heat transfer of hybrid nanofluid over a permeable shrinking cylinder with Joule heating: A comparative analysis. Alexandria Engineering Journal, 59(3), 1787−1798. doi: 10.1016/j.aej.2020.04.048
[26] Naseem, T., Fatima, U., Munir, M., Shahzad, A., Kausar, N., Nisar, K.S., Saleel, C.A., & Abbas, M. (2022). Joule heating and viscous dissipation effects in hydromagnetized boundary layer flow with variable temperature. Case Studies in Thermal Engineering, 35, 102083. doi: 10.1016/j.csite.2022.102083
[27] Rehman, S., Anjum, A., Farooq, M., Hashim, & Malik, M.Y. (2022). Melting heat phenomenon in thermally stratified fluid reservoirs (Powell-Eyring fluid) with joule heating. International Communications in Heat and Mass Transfer, 137, 106196. doi:10.1016/j.icheatmasstransfer.2022.106196
[28] Makhdoum, B.M., Mahmood, Z., Khan, U., Fadhl, B.M., Khan, I., & Eldin, S.M. (2023). Impact of suction with nanoparticles aggregation and joule heating on unsteady MHD stagnation point flow of nanofluids over horizontal cylinder. Heliyon, 9(4),e15012. doi: 10.1016/j.heliyon.2023.e15012.
[29] Raza, R., Naz, R., & Abdelsalam, S.I. (2023). Microorganisms swimming through radiative Sutterby nanofluid over stretchable cylinder: Hydrodynamic effect. Numerical Methods for Partial Differential Equations, 39(2), 975−994. doi: 10.1002/num.22913
[30] Alsaedi, A., Razaq, A., Hayat, T., & Khan, S.A. (2023). On bioconvective chemically reactive flow involving applications of magnetohydrodynamic and radiation. Alexandria Engineering Journal, 75, 549−563. doi: 10.1016/j.aej.2023.06.015
[31] Wazawa T., & Nagai, T. (2023). Joule heating involving ion currents through channel proteins. Biophysics and Physicobiology, 20(3), e200030, doi: 10.2142/biophysico.bppb-v20.0030
[32] Manshadi M.K.D., & Beskok, A. (2023). Competing effects of buoyancy-driven and electrothermal flows for Joule heatinginduced transport in microchannels. Flow, 3, E23. doi: 10.1017/flo.2023.19
[33] Khan, S.A., Eze, C., Lau, K.T., Ali, B., Ahmad, S., Ni, S., & Zhao, J. (2022). Study on the novel suppression of heat transfer deterioration of supercritical water flowing in vertical tube through the suspension of alumina nanoparticles. International Communications in Heat and Mass Transfer, 132, 105893. doi:10.1016/j.icheatmasstransfer.2022.105893
[34] Narayanaswamy, M., Kandasamy, J., & Sivanandam, S. (2022). Go-MoS2/Water Flow over a Shrinking Cylinder with Stefan Blowing, Joule Heating, and Thermal Radiation. Mathematical and Computational Applications, 27, 110. doi: 10.3390/mca27060110
[35] Ali, A., Khatoon, R., Ashraf, M., & Awais, M. (2022). Cattaneo– Christov heat flux on MHD flow of hybrid nanofluid across stretched cylinder with radiations and Joule heating effects. Waves in Random and Complex Media (pp. 1−18). doi:10.1080/17455030.2022.2145524
[36] Naseem, T., Shahzad, A., Sohail, M., & Askar, S. (20230). Axisymmetric Flow and Heat Transfer in TiO2/H2O Nanofluid over a Porous Stretching-Sheet with Slip Boundary Conditions via a Reliable Computational Strategy. Energies, 16(2), 681. doi10.3390/en16020681
[37] Bibi, S., Elahi, Z., & Shahzad, A. (2020). Impacts of different shapes of nanoparticles on SiO2 nanofluid flow and heat transfer in a liquid film over a stretching sheet. Physica Scripta, 95(11),115217. doi: 10.1088/1402-4896/abbc9d
