Visual and microscopic tests of composite PV module samples for the construction of roof and facade type BIPV
DOI:
https://doi.org/10.24425/ather.2024.152005Abstract
The introduction of new material solutions into the BIPV (Building Integrated Photovoltaics) requires the need to check their suitability in this area. This especially applies to resistance to weather conditions and resistance to UV radiation. The authors conducted a series of tests on samples of photovoltaic modules made using a composite lamination technology based on glass fibres and hardened resins. The resistance of such a structure to atmospheric conditions and degradation by UV rays was investigated. Both of these areas have a significant impact on the efficiency of such a solution in terms of converting solar energy into electricity and the service life of the solution. It was found that delamination of the composite PV modules can be avoided in the case of some studied resins (e.g. LG 385).References
[1] Ferroni, F., & Hopkirk, R.J. (2016). Energy Return on Energy Invested (ERoEI) for photovoltaic solar systems in regions of moderate insolation. Energy Policy, 94, 336–344. doi: 10.1016/ j.enpol.2016.03.034.
[2] Mik, K., Zawadzki, P., Tarłowski, J., & Bykuć S. (2022). Assess-ment of prototype lightweight photovoltaic modules after over 1-year field test in Polish conditions. Renewable Energy, 198, 1008–1020. doi: 10.1016/j.renene.2022.08.104
[3] Martins, A.C., Chapuis, V., Virtuani, A., Perret-Aebi, L.-E., & Ballif, C. (2017). Hail resistance of composite-based glass-free lightweight modules for building integrated photovoltaics appli-cations. 33rd European Photovoltaic Solar Energy Conference and Exhibition, 25–29 September 2017, Amsterdam, Nether-lands. doi: 10.4229/EUPVSEC20172017-6BV.3.62
[4] Oreski, G., Stein, J.S., Eder, G.C., Berger, K.A., Bruckman, L.S., Vedde, J., Weiß, K., Tanahashi, T., French, R.H., & Ranta, S. (2021). Designing new materials for photovoltaics: Opportuni-ties for lowering cost and increasing performance through ad-vanced material innovations. Report IEA-PVPS T13-13:2021. doi: 10.2172/1779380
[5] Berger, K., Cueli, A.B., Boddaert, S., Buono, M.D., Delisle, V., Fedorova, A.S., Frontini, F., Hendrick, P., Inoue, S., Ishii, H., Kapsis, C., Kim, J., Kovács, P., Chivelet, N.M., Maturi, L., Machado, M., Schneider, A., & Wilson, H.R. (2018). International definitions of “BIPV”. Report IEA-PVPS T15-04: 2018: doi: 10.13140/RG.2.2.15351.68007
[6] Ghosh, A (2020). Potential of building integrated and attached/ applied photovoltaic (BIPV/BAPV) for adaptive less energy-hun-gry building’s skin: A comprehensive review. Journal of Cleaner Production, 276, 123343. doi: 10.1016/j.jclepro.2020.123343
[7] Martins, A.C., Chapuis, V., Sculati-Meillaud, F., Virtuani, A., & Ballif, C (2018). Light and durable: Composite structures for building-integrated photovoltaic modules. Progress in Photovol-taic Research and Applications. 26(9), 718–729. doi: 10.1002/ pip.3009
[8] Gaddam, S.K., Pothu, R., & Rajender Boddula, R. (2021). Ad-vanced polymer encapsulates for photovoltaic devices − A re-view. Journal of Materiomics, 7, 920–928. doi: 10.1016/j.jmat. 2021.04.004.
[9] Olorunfemi, T.R., Nwulu, N.I., & Ismail, S.O. (2022). Compo-sites as candidate materials for photovoltaic cells. Advances in Materials and Processing Technologies, 8(4), 2378–2397. doi: 10.1080/2374068X.2022.2046328
[10] Kajisa, T., Miyauchi, H., Mizuhara, K., Hayashi, K., Tokimitsu, T., Inoue, M., Hara, K., & Masuda, A. (2014). Novel lighter weight crystalline silicon photovoltaic module using acrylic-film as a cover sheet. Japanese Journal of Applied Physics, 53, 092302. doi: 10.7567/JJAP.53.092302
[11] Mik, K., Bugaj, M., & Chaja, P. (2021). The evaluation of the snail track affected photovoltaic modules by different methods after 3-year operating in central Poland. Renewable Energy, 163, 504-516. doi: 10.1016/j.renene.2020.09.005
[12] Nussbaumer, H., Klenk, M., & Keller, N. (2016). Small unit com-pound modules: a new approach for light weight PV modules. 32rd European Photovoltaic Solar Energy Conference and Exhi-bition, 20–24 June 2016, Munich, Germany. doi: 10.4229/ EUPVSEC20162016-1BO.12.5
[13] Schindler, S., Götz, D., & Dassler, D. (2019). Lightweight PV module approach − field test study and yield evaluation. 36th European Photovoltaic Solar Energy Conference and Exhibition, 9–13 September 2019, Marseille, France. doi: 10.4229/ EUPVSEC20192019-1BO.9.5.
[14] Martins, A.C., Chapuis, V., Virtuani, A., & Ballif, C. (2019). Ro-bust glass-free lightweight photovoltaic modules with improved resistance to mechanical loads and impact. IEEE Journal of Pho-tovoltaics, 9(1), 245251. doi: 10.1109/JPHOTOV.2018. 2876934
