Modelling the heat transfer of nanofluid towards a radiating stretching sheet of varying thickness using thermal flux

Authors

  • Pragya Pandey Department of Mathematics, SRM Institute of Science and Technology, Ramapuram, Chennai – 600 089, Tamil Nadu, India
  • Dhatchana Moorthy Kavitha Department of Mathematics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha Nagar, Thandalam, Chennai – 602 105, Tamil Nadu, India
  • Thangaraju Lawanya Department of Mathematics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha Nagar, Thandalam, Chennai – 602 105, Tamil Nadu, India

DOI:

https://doi.org/10.24425/ather.2025.154908

Abstract

The present paper targets the flow of fluid with Fe3O4 particles as nanomaterial over a non-linear elongated sheet with changing width. The process holds vital importance in various industries like paper manufacturing, extrusion of dyes and filaments, atomic reactors and many more. Nanofluids depict special features which give them the potential to be also used in power engines, refrigerators, power plants as well as pharmaceutical processes. Hence, the presented model is designed to intensify the rate of heat transfer and to reduce energy wastage, and tailor for the optimal selection of parameters like conductivity as well as viscosity, which will improve the effectiveness of the heat transfer process. The main idea behind this investigation is to calculate the effect of electromagnetohydrodynamics, Biot number, Eckert number, radiation along with the absorption factor. In this paper, the flow is modelled by using Navier-Stokes equations which are customised to Prandtl boundary layer equations. The Adams-Bashforth predictor-corrector is used to obtain numerical solutions. The present study helps to potentially improve and achieve the desired quality of the stretching sheet. Moreover, a negligible amount of activation energy is required, finding an economical way to get suitable outputs.

References

[1] Khan, W.A., & Pop, I. (2010). Boundary-layer flow of a nanofluid past a stretching sheet. International Journal of Heat and Mass Transfer, 53(11–12), 2477–2483. https://doi.org/10.1016/j.ijheatmasstransfer.2010.01.032

[2] Ibrahim, W., & Shankar, B. (2013). MHD boundary layer flow and heat transfer of a nanofluid past a permeable stretching sheet with slip conditions. Computers & Fluids, 75, 1–10. https://doi.org/10.1016/j.compfluid.2013.01.014

[3] Gireesha, B., Sowmya, G., Khan, M.I., & Öztop, H.F. (2020). Flow of hybrid nanofluid across a moving fin with radiation. Computer Methods and Programs in Biomedicine, 185, 105166. https://doi.org/10.1016/j.cmpb.2019.105166

[4] Makarem, M.A., Bakhtyari, A., & Rahimpour, M.R. (2018). Numerical investigation on heat and fluid flow of nanofluids. Heat Transfer – Asian Research, 47(2), 347–365. https://doi.org/10.1002/htj.21307

[5] Ghalambaz, M., Groşan, T., & Pop, I. (2019). Mixed convection boundary layer flow with nano-encapsulated PCM. Journal of Molecular Liquids, 293, 111432. https://doi.org/10.1016/j.molliq.2019.111432

[6] Hajjar, A., Mehryan, S., & Ghalambaz, M. (2020). Time periodic natural convection in nano-encapsulated phase-change suspension. International Journal of Mechanical Sciences, 166, 105243. https://doi.org/10.1016/j.ijmecsci.2019.105243

[7] Saeed, A., Kumam, P., Nasir, S., Gul, T., & Kumam, W. (2021). Non-linear convective flow of thin film nanofluid. Scientific Reports, 11, 18410. https://doi.org/10.1038/s41598-021-97576-x

[8] Mathew, A., Areekara, S., Sabu, A., & Saleem, S. (2021). Slip effects on stagnation flow of silver-blood nanofluid. Surfaces and Interfaces, 25, 101267. https://doi.org/10.1016/j.surfin.2021.101267

[9] Krishnamurthy, M., Prasanna Kumara, B., Gireesha, B., & Gorla, R.S. (2015). Viscous dissipation effects on hydromagnetic nanofluid flow. Cogent Mathematics, 2, 1050973. https://doi.org/10.1080/23311835.2015.1050973

[10] Senthilraja, S., Vijayakumar, K., & Gangadevi, R. (2015). Comparative study on thermal conductivity of nanofluids. Digest Journal of Nanomaterials and Biostructures, 10(4), 1449–1458.

[11] Chamkha, A., Doostanidezfuli, A., Izadpanahi, E., & Ghalambaz, M. (2017). Phase-change heat transfer of hybrid nanomaterials. Advanced Powder Technology, 28(2), 385–397. https://doi.org/10.1016/j.apt.2016.10.009

[12] Sharma, K., & Kumar, S. (2023). Magnetic field effects on ferrofluid flow over rotating disk. Journal of Magnetism and Magnetic Materials, 575, 170720. https://doi.org/10.1016/j.jmmm.2023.170720

[13] Gopal, D., Saleem, S., Jagadha, S., Ahmad, A., Almatroud, A.O., & Kishan, N. (2021). Chemical reaction effects in MHD nanofluid. Alexandria Engineering Journal, 60(1), 1861–1871. https://doi.org/10.1016/j.aej.2020.11.034

[14] Sowmya, G., Gireesha, B.J., & Madhu, M. (2020). Analysis of wetted moving fin with heat generation. Heat Transfer, 49(4), 1939–1954. https://doi.org/10.1002/htj.21701

[15] Alsaedi, A., Hayat, T., Qayyum, S., & Yaqoob, R. (2020). Eyring-Powell nanofluid flow with entropy minimization. Computer Methods and Programs in Biomedicine, 186, 105183. https://doi.org/10.1016/j.cmpb.2019.105183

[16] Fang, T., Zhang, J., & Zhong, Y. (2012). Boundary layer flow over stretching sheet with variable thickness. Applied Mathematics and Computation, 218(13), 7241–7252. https://doi.org/10.1016/j.amc.2011.12.094

[17] Shah, Z., Ramzan, M., Kumam, P., Khan, W., Watthayu, W., & Kumam, W. (2022). MHD nanofluid flow with Hall current. PLoS One, 17(4), e0264208. https://doi.org/10.1371/journal.pone.0264208

[18] Khader, M.M., & Megahed, A.M. (2013). Numerical solution for boundary layer flow with variable thickness. EPJ Plus, 128, 100. https://doi.org/10.1140/epjp/i2013-13100-7

[19] Alawi, O.A., Sidik, N.A.C., Xian, H.W., Kean, T.H., & Kazi, S.N. (2018). Thermal conductivity and viscosity of nanofluids. International Journal of Heat and Mass Transfer, 116, 1314–1325. https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.133

[20] Suresh, S., Venkitaraj, K.P., Selvakumar, P., & Chandrasekar, M. (2012). Effect of hybrid nanofluid on heat transfer. Experimental Thermal and Fluid Science, 38, 54–60. https://doi.org/10.1016/j.expthermflusci.2011.11.007

[21] Momin, G.C. (2013). Experimental investigation of mixed convection using nanofluids. International Journal of Scientific and Technology Research, 2(12), 195–202.

[22] Takabi, B., & Salehi, S. (2014). Heat transfer enhancement using hybrid nanofluid. Advances in Mechanical Engineering, 6, 147059. https://doi.org/10.1155/2014/147059

[23] Devi, S.P.A., & Devi, S.S.U. (2016). Hydromagnetic hybrid nanofluid flow over stretching sheet. International Journal of Nonlinear Sciences and Numerical Simulation, 17(5), 249–257. https://doi.org/10.1515/ijnsns-2016-0037

[24] Ghalambaz, M., Doostani, A., Izadpanahi, E., & Chamkha, A. (2017). Phase-change heat transfer in cavity with nanomaterials. Journal of the Taiwan Institute of Chemical Engineers, 72, 104–115. https://doi.org/10.1016/j.jtice.2017.01.010

[25] Shuguang, L., Puneet, V., Saeed, A.M., Singhal, A., Fuad, A.M., Yarimi, A.I., & Ijaz Khan, M. (2024). Analysis of velocity slip in ternary nanofluid flow. Scientific Reports, 14(1), 2340–2351. https://doi.org/10.1038/s41598-024-83032-z

[26] Prajapati, V.J., & Meher, R. (2024). MHD tangent hyperbolic hybrid nanofluid flow over porous sheet. Journal of Taibah University for Science, 18(1), 2300851. https://doi.org/10.1080/16583655.2023.2300851

[27] Khan, M.S., Ahmad, S., Shah, Z., Vrinceanu, N., Mansoor, H., & Alshehri, M. (2024). Natural convection heat transfer of hybrid nanofluid. Case Studies in Thermal Engineering, 56, 104207. https://doi.org/10.1016/j.csite.2024.104207

[28] Alsabery, A.I., Armaghani, T., Chamkha, A.J., & Hashim, I. (2020). Nanofluid convection in lid-driven cavity. Alexandria Engineering Journal, 59(1), 129–148. https://doi.org/10.1016/j.aej.2019.12.017

[29] Jameel, M., Shah, Z., Shafiq, A., Rooman, M., Vrinceanu, N., Alshehri, A., & Islam, S. (2023). Entropy optimization of hybrid nanofluid flow. International Journal of Thermofluids, 20, 100398. https://doi.org/10.1016/j.ijft.2023.100398

[30] Shah, Z., Sulaiman, M., Dawar, A., Alshehri, M.H., & Vrinceanu, N. (2024). Darcy-Forchheimer hybrid nanofluid flow over rotating disk. Journal of Thermal Analysis and Calorimetry, 149, 14625–14641. https://doi.org/10.1007/s10973-024-12986-z

[31] Muhammad, K., Abdelmohsen, S.A., Abdelbacki, A.M., & Ahmed, B. (2022). Darcy-Forchheimer hybrid nanofluid flow with melting heat. International Communications in Heat and Mass Transfer, 135, 106160. https://doi.org/10.1016/j.icheatmasstransfer.2022.106160

[32] Shah, Z., Sulaiman, M., Khan, W., Vrinceanu, N., & Alshehri, M.H. (2024). Nanofluid flow with microorganisms over Riga plate. Case Studies in Thermal Engineering, 55, 104119. https://doi.org/10.1016/j.csite.2024.104119

[33] Adel, M., Khader, M.M., & Ahmad, H. (2024). MHD nanofluid flow with convective heating. Case Studies in Thermal Engineering, 60, 104683. https://doi.org/10.1016/j.csite.2024.104683

[34] Brinkman, H.C. (1952). The viscosity of concentrated suspensions. Journal of Chemical Physics, 20(4), 571. https://doi.org/10.1063/1.1700493

Downloads

Published

2025-06-30

How to Cite

Pandey, Pragya, et al. “Modelling the Heat Transfer of Nanofluid towards a Radiating Stretching Sheet of Varying Thickness Using Thermal Flux”. Archives of Thermodynamics, vol. 46, no. 2, June 2025, pp. 83-91, doi:10.24425/ather.2025.154908.

Issue

Section

Articles

Similar Articles

<< < 14 15 16 17 18 19 20 > >> 

You may also start an advanced similarity search for this article.