Integrated model of a biomass boiler coupled with a Stirling engine
DOI:
https://doi.org/10.24425/ather.2025.154912Abstract
Integration of a Stirling engine in a biomass boiler can be an interesting renewable alternative for the supply of heat and electricity in isolated homes located in areas where local biomass is available and during months when sunlight is low. Since this integration requires a careful coupling of the engine and boiler, an integrated model of these two devices is a relevant issue. In this case, a modular integrated model of a 25 kWth biomass pellet boiler, fire-tube with a cylindrical water jacket, coupled to a 1 kWe free piston Stirling engine is presented. To model the boiler, and take into account the location of the Stirling head, the zonal method was chosen, which allows estimating this temperature from an additional set of surrounding temperatures. For the Stirling engin, a model widely used to evaluate those engines was used. Various software tools have been used to integrate the model sequentially. The integrated model predicts the thermal and electrical production based on different operation parameters, such as the boiler load in 5% fractions of its load from 50 to 100%. The obtained results, which will be validated with the experimental setup, show a maximum output of approximately 600 W for the engine and a decreasing temperature profile in the combustion chamber, as a function of the partial load.References
[1] Schneider, T., Müller, D., & Karl, J. (2020). A review of thermochemical biomass conversion combined with Stirling engines for small-scale cogeneration. Renewable and Sustainable Energy Reviews, 134, 110288. https://doi.org/10.1016/j.rser.2020.110288
[2] Zhu, G., Yu, K., Liang, W., Dai, W., & Luo, E. (2021). A review of Stirling-engine-based combined heat and power technology. Applied Energy, 294, 116965. https://doi.org/10.1016/j.apenergy.2021.116965
[3] Hachem, H., Gheith, R., Aloui, F., & Nasrallah, S.B. (2018). Technological challenges and optimization of Stirling machines: A review. Energy Conversion and Management, 171, 1365–1387. https://doi.org/10.1016/j.enconman.2018.06.042
[4] Zare, S., & Tavakolpour, A. (2020). Free piston Stirling engines: A review. International Journal of Energy Research, 44, 5039–5070. https://doi.org/10.1002/er.4533
[5] Ahmadi, M.H., Ahmadi, M.A., & Pourfayaza, F. (2017). Thermal models for Stirling engine performance: A review. Renewable and Sustainable Energy Reviews, 68, 168–184. https://doi.org/10.1016/j.rser.2016.09.033
[6] Jiménez, P., Cardozo, E., Choque, L.A., & Araoz, J.A. (2020). Performance analysis of a Stirling engine hybrid system. Energies, 13, 980. https://doi.org/10.3390/en13040980
[7] Laazaar, K., & Boutammachte, N. (2020). Decision support method for Stirling engine selection. Energy Conversion and Management, 223, 113326. https://doi.org/10.1016/j.enconman.2020.113326
[8] Udeh, G.T., Michailos, S., Ingham, D., Hughes, K.J., Ma, L., & Pourkashanian, M. (2020). Techno-enviro-economic assessment of biomass micro-CCHP system. Energy Conversion and Management, 227, 113601. https://doi.org/10.1016/j.enconman.2020.113601
[9] Auñón, J.A., Pérez, J.M., Martín, M.J., Auñón, F., & Núñez, D. (2023). Software for analysis of Stirling engine models. Heliyon, 9, e18487. https://doi.org/10.1016/j.heliyon.2023.e18487
[10] Jiang, Z., Yu, G., Zhu, S., Dai, W., & Luo, E. (2022). Advances in free-piston Stirling engine CHP systems. Applied Thermal Engineering, 217, 119187. https://doi.org/10.1016/j.applthermaleng.2022.119187
[11] Kwankaomeng, S., Silpsakoolsook, B., & Savangvong, P. (2014). Stability and performance of free-piston Stirling engine. Energy Procedia, 52, 598–609. https://doi.org/10.1016/j.egypro.2014.07.115
[12] González-Pino, I., Pérez-Iribarren, E., Campos-Celador, A., Terés-Zubiaga, J., & Las-Heras-Casas, J. (2020). Modelling and experimental characterization of Stirling micro-CHP. Energy Conversion and Management, 225, 113429. https://doi.org/10.1016/j.enconman.2020.113429
[13] Valenti, G., Campanari, S., Silva, P., Fergnani, N., Ravidà, A., Di Marcoberardino, G., & Macchi, E. (2014). Modeling and testing of micro-cogeneration Stirling engine. Energy Procedia, 61, 484–487. https://doi.org/10.1016/j.egypro.2014.11.1154
[14] Choque, L.A., & Araoz, A. (2023). Development of prototype Stirling engine in bioenergy plant. Heat Transfer Engineering. https://doi.org/10.1080/01457632.2023.2185492
[15] Cardozo, E., Erlich, C., Malmquist, A., & Alejo, L. (2014). Integration of pellet burner and Stirling engine for CHP. Applied Thermal Engineering, 73, 671–680. https://doi.org/10.1016/j.applthermaleng.2014.08.024
[16] Damirchi, H., Najafi, G., Alizadehnia, S., Mamat, R., Sidik, N.A.C., Azmi, W.H., & Noor, M.M. (2016). Biomass micro-CHP using Stirling engine. Applied Thermal Engineering, 103, 1460–1469. https://doi.org/10.1016/j.applthermaleng.2016.04.118
[17] Arashnia, I., Najafi, G., Ghobadian, B., Yusaf, T., Mamat, R., & Kettner, M. (2015). Micro-scale biomass CHP using Stirling engine. Energy Procedia, 75, 1108–1113. https://doi.org/10.1016/j.egypro.2015.07.505
[18] Cardozo, E., & Malmquist, A. (2019). Performance comparison of biomass fuels in Stirling engine CHP. Applied Thermal Engineering, 159, 113945. https://doi.org/10.1016/j.applthermaleng.2019.113945
[19] Araoz, J.A., Cardozo, E., Salomon, M., Alejo, L., & Fransson, T.H. (2015). Thermodynamic model of gamma Stirling engine. Applied Thermal Engineering, 83, 16–30. https://doi.org/10.1016/j.applthermaleng.2015.03.006
[20] Esteban, I. (2014). Análisis y caracterización de la combustión de pélets. Universidad de Valladolid.
[21] Hottel, H.C., & Sarofim, A.F. (1967). Radiative transfer. McGraw-Hill.
[22] Noble, J.J. (1975). The zone method for radiative exchange equations. International Journal of Heat and Mass Transfer, 18, 261–269.
[23] Hofgren, H., & Sunden, B. (2015). Evaluation of Planck mean coefficients in combustion. Heat and Mass Transfer, 51, 507–519. https://doi.org/10.1007/s00231-014-1431-0
[24] Rhine, J.M., & Tucker, R.J. (1991). Modelling of gas-fired furnaces and boilers. British Gas.
[25] Walker, G., & Senft, J.R. (1985). Free piston Stirling engines. Springer.
[26] Urieli, I., & Berchowitz, D.M. (1984). Stirling cycle engine analysis. Adam Hilger.
[27] Urieli, I. (2002). Stirling cycle machine analysis. https://www.ohio.edu/mechanicalfaculty/urieli/stirling/Index.html
[28] Scarpin, G. (2012). Modelo simple de motores Stirling. Instituto Universitario Aeronáutico.
[29] Araoz, J.A., Salomon, M., Alejo, L., & Fransson, T.H. (2014). Non-ideal Stirling engine model. Applied Thermal Engineering, 73, 205–221. https://doi.org/10.1016/j.applthermaleng.2014.07.050
[30] CTE UNE124 (2023). Heating boilers for solid fuels – UNE-EN 303-5:2022+A1.
[31] Larsen, M.E., & Howell, J.R. (1985). Exchange factor method for radiation analysis. Journal of Heat Transfer, 107(4), 936–942. https://doi.org/10.1115/1.3247524
