Linear method for the determination of Newton’s heat transfer coefficient in the gap under conditions of limited convection
DOI:
https://doi.org/10.24425/ather.2025.154914Abstract
This study investigates heat transfer under conditions of limited (undeveloped) convection within a narrow 5 cm gap between a centrally positioned heater and the inner walls of a closed chamber. A simplified approach − the linear method − is proposed for estimating Newton’s heat transfer coefficient, assuming a weak linear dependence on temperature. Experimental data and known convection models were used to verify the method. The convective component obtained using the linear method was compared to experimental values and theoretical bounds, showing that the linear method slightly overestimates but remains within a valid range. Artificial neural networks supported the estimation of steady-state temperatures and voltages. This work is a continuation of earlier research and confirms the practical value of the linear method in constrained thermal environments. Further development of the experimental rig is planned to expand the study.References
[1] McAdams, W.H. (1954). Heat transmission. McGraw-Hill.
[2] Lienhard IV, J.H., & Lienhard V, J.H. (2019). Heat transfer textbook. Phlogiston Press.
[3] Aubin, D. (2008). The memory of life itself: Bénard’s cells and the cinematography of self-organization. Studies in History and Philosophy of Science A, 39(3), 359–369. https://doi.org/10.1016/j.shpsa.2008.06.007
[4] Aliouane, I., Kaid, N., Ameur, H., & Laidoud, H. (2021). Investigation of flow and thermal fields in square enclosures: Rayleigh-Bénard instabilities. Thermal Science and Engineering Progress, 25. https://doi.org/10.1016/j.tsep.2021.100959
[5] Mathews, J., & Hymavathi, T. (2024). Unsteady MHD free convection and heat transfer flow of Al2O3–Cu/water nanofluid over stretching sheet. Archives of Thermodynamics, 45(1), 165–173. https://doi.org/10.24425/ather.2024.150449
[6] Mathews, J., & Hymavathi, T. (2024). Unsteady flow of silica nanofluid over stretching cylinder with nanoparticle shape effects. Archives of Thermodynamics, 45(3), 115–126. https://doi.org/10.24425/ather.2024.151222
[7] Houdek, G., & Dupret, M.A. (2015). Interaction between convection and pulsation. Living Reviews in Solar Physics, 12(8). https://doi.org/10.1007/lrsp-2015-8
[8] Husain, S., Adil, M., Arqam, M., & Shabani, B. (2021). Review on natural convection in vertical annulus and applications. Renewable and Sustainable Energy Reviews, 150. https://doi.org/10.1016/j.rser.2021.111463
[9] Misale, M., Fossa, M., & Tanda, G. (2014). Free convection in a vertical water channel. Experimental Thermal and Fluid Science, 59, 252–257. https://doi.org/10.1016/j.expthermflusci.2014.01.022
[10] Pretot, S., Zeghmati, B., & Palec Le, G. (2000). Natural convection on a horizontal plate. Applied Thermal Engineering, 20(10), 873–891. https://doi.org/10.1016/S1359-4311(99)00067-8
[11] Radziemska, E., & Lewandowski, W.M. (2001). Natural convection from downward-facing plate. Applied Energy, 68(4), 347–366. https://doi.org/10.1016/S0306-2619(00)00061-1
[12] Rohsenow, W.M., & Hartnett, J.P. (1998). Handbook of heat transfer. McGraw-Hill.
[13] Ghoben, Z.K., & Hussein, A.K. (2002). Natural convection inside 3D enclosures – A review. International Journal of Heat and Technology, 40(1), 32–246. https://doi.org/10.18280/ijht.400128
[14] Chithrakumar, V., Venugopal, G., & Rajkumar, M. (2019). Convection in vertical annular gap with rotating outer cylinder. Heat and Mass Transfer, 55, 2873–2888. https://doi.org/10.1007/s00231-019-02614-0
[15] Petrichenko, M., & Petrochenko, M. (2022). Hydraulics of natural convection flows in building walls. Magazine of Civil Engineering, 26, 63–69. https://doi.org/10.5862/MCE.26.8
[16] Said, S.A.M., & Krane, R.J. (1990). Natural convection heat transfer in vertical channels. International Journal of Heat and Mass Transfer, 33, 1121–1134. https://doi.org/10.1016/0017-9310(90)90245-P
[17] De Giorgi, L., Bertola, V., & Cafaro, E. (2011). Thermal convection in double glazed windows. Energy and Buildings, 43(8), 2034–2038. https://doi.org/10.1016/j.enbuild.2011.03.043
[18] Pelińska-Olko, E. (2023). Emissivity measurement of black paint. Archives of Thermodynamics, 44(3). https://doi.org/10.1007/s10765-011-1010-2
[19] Lewkowicz, M., & Pelińska-Olko, E. (2018). Numerical prediction of steady state temperature. MATEC Web of Conferences, 240, 05024. https://doi.org/10.1051/matecconf/201824005024
[20] Hobler, T. (1971). Heat movement and exchangers. WNT Warszawa.
[21] Pudlik, W. (2012). Heat exchange and exchangers. Wydawnictwo Politechniki Gdańskiej.
[22] Kostowski, E. (2003). Heat transfer (collective work). Wydawnictwo Politechniki Śląskiej.
[23] Mikielewicz, J., & Mikielewicz, D. (2024). Influence of thermodynamics on technology and science development. Archives of Thermodynamics, 45(2), 51–61. https://doi.org/10.24425/ather.2024.150851
[24] Batagelj, V., & Bojkovski, R.J. (2011). Calibration of platinum resistance thermometers. Journal of Thermophysics, 32, 1409–1417. https://doi.org/10.1007/s10765-011-1010-2
[25] Wędrychowicz, W. (2015). Temperature measurement with resistance thermometers. Politechnika Wrocławska.
[26] Lundström, H., & Mattsson, M. (2020). Radiation influence on air temperature sensors. Experimental Thermal and Fluid Science, 115. https://doi.org/10.1016/j.expthermflusci.2020.110082
[27] Wędrychowicz, W. (2017). Temperature measurement with thermocouples. Politechnika Wrocławska.
[28] Liu, H.T., Shao, D., & Li, B.Q. (2012). Theory analysis of thermocouple temperature measurement. Applied Mechanics and Materials, 239–240, 749–753. https://doi.org/10.4028/www.scientific.net/AMM.239-240.749
[29] Liu, B., Huang, Q.H., & Wang, P.Y. (2020). Influence of gas temperature on thermocouple measurement. Case Studies in Thermal Engineering, 19. https://doi.org/10.1016/j.csite.2020.100627
[30] Termoaparatura. (2023). Czujniki termoelektryczne – katalog. https://termoaparatura.com.pl/media/wysiwyg/docs/type-k-table-pl.pdf [accessed 22 Feb. 2025].
[31] Tadeusiewicz, R., & Szaleniec, M. (2015). Neural network lexicon. Fundacja „Projekt Nauka”.
[32] Cantú-Paz, E. (2003). Pruning neural networks with estimation algorithms. GECCO, LNCS 2723, 790–800. https://doi.org/10.1007/3-540-45105-6_93
[33] Pavlidis, N.G., Tasoulis, O.K., Plagianakos, V.P., Nikiforidis, G., & Vrahatis, M.N. (2005). Spiking neural network training using evolutionary algorithms. IEEE IJCNN, 4, 2190–2194. https://doi.org/10.1109/IJCNN.2005.1556240
[34] Ripley, B., & Venables, W. (2022). Package ‘nnet’. https://cran.r-project.org/web/packages/nnet/nnet.pdf [accessed 22 Feb. 2025].
[35] Rigler, A.K., Irvine, J.M., & Vogl, T.P. (1991). Rescaling variables in backpropagation learning. Neural Networks, 4, 225–229. https://doi.org/10.1016/0893-6080(91)90006-Q
[36] StatSoft. (1984–2024). Electronic statistics textbook. https://www.statsoft.pl/textbook [accessed 22 Feb. 2025].
[37] Stachurski, A. (1999). Optimization basics. Oficyna Wydawnicza PW.
[38] El-Awad, M.M., & Al-Saidi, M.S. (2022). Excel as educational platform for thermal systems. World Journal of Engineering and Technology, 10(2), 434–443. https://doi.org/10.4236/wjet.2022.102025
[39] Esen, H., Inalli, M., Sengur, A., & Esen, M. (2008). ANN and ANFIS for ground-coupled heat pump system. Energy and Buildings. https://doi.org/10.1016/j.enbuild.2007.10.002
[40] Esen, H., Inalli, M., Sengur, A., & Esen, M. (2008). Forecasting heat pump performance using neural networks. International Journal of Thermal Sciences, 47(4), 431–441. https://doi.org/10.1016/j.ijthermalsci.2007.03.004
[41] Esen, H., Ozgen, F., Esen, M., & Sengur, A. (2009). Neural network modeling of solar air heater. Expert Systems with Applications, 36(8), 11240–11248. https://doi.org/10.1016/j.eswa.2009.02.073
