Passive Mixer-based UWB Receiver with Low Loss, High Linearity and Noise-cancelling for Medical Applications

Authors

  • Thaar A. Kareem Systems Integration & Emerging Energies Laboratory, Electrical Engineering Department, National Engineers School of Sfax, University of Sfax, Sfax, Tunisia
  • Hatem Trabelsi Systems Integration & Emerging Energies Laboratory, Electrical Engineering Department, National Engineers School of Sfax, University of Sfax, Sfax, Tunisia

DOI:

https://doi.org/10.24425/ijet.2023.144332

Abstract

A double balanced passive mixer-based receiver operating in the 3-5 GHz UWB for medical applications is described in this paper. The receiver front-end circuit is composed of an inductorless low noise amplifier (LNA) followed by a fully differential voltage-driven double-balanced passive mixer. A duty cycle of 25% was chosen to eliminate overlap between LO signals, thereby improving receiver linearity. The LNA realizes a gain of 25.3 dB and a noise figure of 2.9 dB. The proposed receiver achieves an IIP3 of 3.14 dBm, an IIP2 of 17.5 dBm and an input return loss (S11) below -12.5dB. Designed in 0.18μm CMOS technology, the proposed mixer consumes 0.72pW from a 1.8V power supply. The designed receiver demonstrated a good ports isolation performance with LO_IF isolation of 60dB and RF_IF isolation of 78dB.

Published

2023-03-15

How to Cite

Kareem, Thaar A., and Hatem Trabelsi. “Passive Mixer-Based UWB Receiver With Low Loss, High Linearity and Noise-Cancelling for Medical Applications”. International Journal of Electronics and Telecommunications, vol. 69, no. 1, Mar. 2023, doi:10.24425/ijet.2023.144332.

Issue

Section

Artykuły