Towards an Optimal Motor Mounting Bracket Using Topology Optimization Combined with Sustainability and Manufacturing Cost Analysis
DOI:
https://doi.org/10.24425/mper.2023.147208Abstract
The engine is the most important component of a vehicle. It attaches to the main frame via the engine mounting bracket which supports weight and operating loads. The engine mount therefore plays a crucial role in the durability and comfort of the vehicle. This article contributes to the search for the most optimal model from the point of view of resistance, environmental impact, and manufacturing cost. This involves, on the one hand, optimizing the support by reducing its initial mass by 30%, and on the other hand, seeking suitable material and manufacturing process with the least environmental impact. To this end, topology optimization will be combined with an environmental assessment and a manufacturing cost analysis. Four materials will be tested and evaluated. Finally, a cost analysis will present a comparison between a conventional process and 3D printing.References
ABAQUS/TOSCA, Dassault Systèmes, Dassault Systèmes (2023). Accessed: Apr. 03, 2023. [Online]. Available: https://www.3ds.com/ On line document
Bender D., & Barari, A. (2019). Integrated Digital Design and Manufacturing for 3D Printing Technologies. IFAC-Pap., 52(10), 248-253. DOI: 10.1016/j.ifacol.2019.10.031.
Bendsøe, M.P., & Sigmund, O. (2004). Topology Optimization. Berlin, Heidelberg: Springer. DOI: 10. 1007/978-3-662-05086-6.
Bhatia, A., & Sehgal, A.K. (2023). Additive manufacturing materials, methods and applications: A review. Materials Today: Proceedings, 81, 1060-1067. DOI: 10.1016/j.matpr.2021.04.379.
Christensen, P.W., & Klarbring, A. (2008). An Introduction to Structural Optimization. Solid Mechanics and Its Applications, 153. Dordrecht: Springer Netherlands. DOI: 10.1007/978-1-4020-8666-3.
Colorado, H.A., Velásquez, E.I.G., & Monteiro, S.N. (2020). Sustainability of additive manufacturing: the circular economy of materials and environmental perspectives. Journal of Materials Research and Technology, 9(4), 8221-8234. DOI: 10.1016/j.jmrt.2020. 04.062.
Doutre, P.-T., Vo, T.H., Marin, P.R., Pourroy, F., Prudhomme, G., & Vignat, F. (2015). Topology optimization: key tool for design parts produced by additive manufacturing? Topology optimization: key tool for design parts produced by additive manufacturing? Hal Open Science, 73, hal-01236570.
Duriez, E., Morlier, J., Azzaro-Pantel, C., & Charlotte, M. (2022). Ecodesign with topology optimization. Procedia CIRP, 109, 454-459. DOI: 10.1016/j.procir.2022.05.278.
Ecodesign Studio: le logiciel pour l’éco-conception (2023). Accessed: Jan. 02, 2023. [Online]. Available: https://altermaker.fr/ecodesign-studio/ Website application
Fihri-Fassi, H., Ourihi, R., & Elahrach, K. (2021). An integrated method involving design-manufacturingenvironment applied in strutural optimization. Materials Today: Proceedings, 38, 135-138. DOI: .
Ghorpade, U.S., Chavan, D.S., Patil, V., & Gaikwad, M. (2013). Finite element analysis and natural frequency optimization of engine bracket. International Journal of Mechanical and Industrial Engineering, 1-6. DOI: 10.47893/IJMIE.2013.111610.47893/IJMIE.2013.1116.
Jayawardane, H., Davies, I.J., Gamage, J.R., John M., & Biswas, W.K. (2023). Sustainability perspectives - a review of additive and subtractive manufacturing. Sustainable Manufacturing and Service Economics, 2, 100015. DOI: 10.1016/j.smse.2023.100015.
Li, D., Liao, W., Dai, N., Dong, G., Tang, Y., & Xie, Y.M. (2018). Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing. Computer-Aided Design, 104, 87-99. DOI: 10.1016/j.cad.2018.06.003.
Liu, J., Gaynor, A.T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C.C.L., Cheng, L., Liang, X. & To, A.C. (2018). Current and future trends in topology optimization for additive manufacturing. Structural and Multidisciplinary Optimization, 57. DOI: 10.1007/-s00158-018-1994-3.
Ni, J., Ling H., Zhang S., Wang Z., Peng Z., Benyshek C., Zan R., Miri, A.K., Li, Z., Zhang, X., Lee, J., Lee K.J., Kim, H.J., Tebon, P., Hoffman, T., Dokmeci, M.R., Ashammakhi, N., Li, X., Khademhosseini, A. (2019). Three-dimensional printing of metals for biomedical applications. Materials Today Bio, 3, 100024. DOI: 10.1016/j.mtbio.2019.100024.
Ourihi, R. Fihri-Fassi, H., & El-Hilali, F. (2021). The optimum size of pet prosthetic for additive manufacturing. Materials Today: Proceedings, 45, 5725-5731. DOI: 10.1016/j.matpr.2021.02.551.
Pragana, J.P.M., Sampaio, R.F.V., Bragança, I.M.F., Silva, C.M.A., & Martins, P.A.F. (2021). Hybrid metal additive manufacturing: A state-of-the-art review. Advances in Industrial and Manufacturing Engineering, 2, 100032. DOI: 10.1016/j.aime.2021.100032.
Rasiya, G., Shukla, A., & Saran, K. (2021). Additive Manufacturing - A Review. Materials Today: Proceedings, 47, 6896-6901. DOI: 10.1016/j.matpr.2021. 05.181.
Walunje M., & Kurkute, V. (2022). Optimization of Engine Mounting Bracket Using FEA. Paripex - Indian Journal of Research, 2, 72.
Wu, J., Sigmund, O., & Groen, J. P. (2021). Topology optimization of multi-scale structures: a review. Structural and Multidisciplinary Optimization, 63, 1455-1480. DOI: 10.1007/s00158-021-02881-8.
Zhao, Q., Chen, X., Wang, L., Zhu, J., Ma, Z.-D., & Lin, Y. (2015). Simulation and experimental validation of powertrain mounting bracket design obtained from multi-objective topology optimization. Advances in Mechanical Engineering, 7(3). DOI: 10.1177/1687814015591317.
Zhou, H., Yang, H., Yao, S., Jiang, L., Sun, N., & Pang, H. (2022). Synthesis of 3D printing materials and their electrochemical applications. Chinese Chemical Letters, 33(8), 3681-3694. DOI: 10.1016/j.cclet.2021.11.018.
EcoDesign Innovation. Accessed: Jan. 02, 2023. [Online]. Available: https://ecodesign.ma Website application
3D CAD Design Software. SOLIDWORKS (2021). Accessed: Feb. 22, 2023. [Online]. Available: https://www.solidworks.com/home-page-2021, On line document
