Modeling of Wire EDM Using an Integrated Approach for Machining of AISI 304 Stainless Steel
DOI:
https://doi.org/10.24425/mper.2024.151130Abstract
A non-traditional method of thermal machining called wire electrical discharge machining (WEDM) is utilized for the production of intricate and complex components, particularly those composed of difficult-to-machine materials. Stainless steel has gained widespread usage in various applications in contemporary industry owing to its exceptional properties. In this present investigation, a numerical 3D finite element modeling simulation was conducted using the ABAQUS software to analyze the Material Removal Rates (MRR) for both single and multi-discharge scenarios of AISI 304 stainless steel. The findings indicate a close correspondence between the MRR values predicted by the numerical modeling and those obtained experimentally corresponding to the optimal process parameters: I = 6 A, Ton = 45 μs, and Toff = 5 μs. Hence, this numerical approach offers the potential to forecast outcomes before actual machining operations.References
Bialo D., Peronczyk J., and Skalski A., (2018). Applications of metallic composites in the automotive industry and their machining by the EDM. Journal of KONES Powertrain and Transport, 1(1), DOI: 10.5604/01.3001.0012.2440.
Bobbili R., Madhu V., and Gogia A. (2015). Multi response optimization of wire-EDM process parameters of ballistic grade aluminium alloy. Engineering Science and Technology, an International Journal, 18(4), 720–726, DOI: 10.1016/j.jestch.2015.05.004.
Boipai B. (2014). FEM analysis for WEDM process. Master’s degree Thesis, National Institute of Technology, Rourkela – 769008.
Datta S., and Mahapatra S., (2010). Modeling, simulation and parametric optimization of wire EDM process using response surface methodology coupled with grey-Taguchi technique. International Journal of Engineering, Science and Technology, 2(5), 162–183, DOI: 10.4314/ijest.v2i5.60144.
Ebisu T., Kawata A., Okamoto Y., Okada A., and Kurihara H., (2018). Influence of Jet Flushing on Corner Shape Accuracy in Wire EDM. Procedia CIRP, 68, 104–108, DOI: 10.1016/j.procir.2017.12.031.
El-Bahloul, S.A. (2020). Optimization of wire electrical discharge machining using statistical methods coupled with artificial intelligence techniques and soft computing. SN Applied Sciences, 2(1), 1–8, DOI: 10.1007/s42452-019-1849-6.
El-Bahloul, S.A., El-Shourbagy, H.E., El-Bahloul, A.M., and El-Midany, T.T. (2018). Experimental and Thermo-Mechanical Modeling Optimization of Thermal Friction Drilling for AISI 304 Stainless steel. CIRP Journal of Manufacturing Science and Technology, 20, 84–92.
El-Bahloul, S.A., and Elkhateeb, M.G. (2023). Wire Deflection Investigation during WEDM of AISI 304 Stainless Steel: An Experimental and Numerical Study. Mansoura Engineering Journal, 48(6), DOI: 10.58491/2735-4202.3080.
El-Bahloul, S.A., and Mostafa, R. (2021). Experimental and Statistical Optimization Of Wire- EDM For Hipped (HIP) Udimet700. International Journal of Mechanical & Mechatronics Engineering IJMMEIJENS, 21(01).
El-Mahalawy, M.M., Samuel, M., Fouda, N., and Elbahloul, S.A. (2021). Investigating the Effect of Wire Electrical Discharge Machining Factors for Ductile Cast Iron ( ASTM A536 ). International Journal of Industrial Engineering & Production Research. 32(2), 1–10, DOI: 10.22068/ijiepr.32.2.1.
Ho, C.C., Chang, Y.J., Hsu, J.C., Kuo, C.L., Kuo, S.K., and Lee, G.H. (2016). Residual strain measurement using wire EDM and DIC in aluminum. Inventions, 1(1), DOI: 10.3390/inventions1010004.
Ibrahim, I.R., Khedr, M., Mahmoud, T.S., Abdel-Aleem, H.A., and Hamada, A. (2021). Study on the mechanical performance of dissimilar butt joints between low Ni medium-Mn and Ni-Cr austenitic stainless steels processed by gas tungsten arc welding. Metals (Basel), 11(9), DOI: 10.3390/met11091439.
Joshi, S.N. and Pande, S.S. (2010). Thermo-physical modeling of die-sinking EDM process. Journal of Manufacturing Process, 12(1), 45–56, DOI: 10.1016/j.jmapro.2010.02.001.
Khedr, M., Ibrahim, R., Jaskari, M., Ali, M., AbdelAleem, H., Mahmoud, T., and Hamada, A. (2023). Microstructural Evolution and Mechanical Performance of Two Joints of Medium-Mn Stainless Steel with Low- and High-Alloyed Steels. Materials, 16(4), DOI: 10.3390/ma16041624.
Kumar, A., Kumar, D., and Maity, K.P. (2014). Numerical Modeling of Wire Electrical Discharge Machining of Super alloy Inconel 718. Procedia Engineering, 97, 1512–1523, DOI: 10.1016/j.proeng.2014.12.435.
Kumar, A., Soota, T., and Kumar, J. (2018). Optimisation of wire-cut EDM process parameter by Greybased response surface methodology. Journal of Industrial Engineering International, 14(4), 821–829, DOI: 10.1007/s40092-018-0264-8.
Maradia, U. and Wegener, K. (2015). EDM Modelling and Simulation. Book Chapter: 3, Nova Science Publishers.
Mythili, T., and Thanigaivelan, R. (2020). Optimization of wire EDM process parameters on Al6061/Al2O3 composite and its surface integrity studies. Bulletin of the Polish Academy of Sciences: Technical Sciences, 68(6), 1403–1412, DOI: 10.24425/bpasts.2020.135382.
Okada, A., Konishi, T., Okamoto, Y., and Kurihara, H. (2015). Wire breakage and deflection caused by nozzle jet flushing in wire EDM. CIRP Annals Manufacturing Technology, 64(1), 233–236, DOI: 10.1016/j.cirp.2015.04.034.
Patel, I., and Powar, P. (2018). Fem Analysis With Experimental Results To Study Effect of Edm Parameters on Mrr of Aisi 1040 Steel. International Research Journal of Engineering and Technology, 05(09), 1332–1341.
Pradhan, M.K. (2010). Modeling and Simulation of Thermal Stress in Electrical Discharge Machining Process. 4th International Conference on Advances in Mechanical Engineering, S.V.N.I.T, Surat, India, pp. 360–364.
Priyan, M., Swin, W., Anand, V., Kelvin, P., Siva, V., (2016). Investigation of Surface Roughness and MRR on Stainless Steel Machined by Wire EDM. International Journal of Engineering Research, 5(03), 66–72, DOI: 10.17577/ijertv5is030114.
Sen, R., Choudhuri, B., Barma, J.D., and Chakraborti, P. (2018). Optimization of wire EDM parameters using teaching learning based algorithm during machining of maraging steel 300. Materials Today. Proceedings, 5(2), 7541–7551, DOI: 10.1016/j.matpr.2017.11.426.
Shahane, S., and Pande, S.S. (2016). Development of a Thermo-Physical Model for Multi-spark Wire EDM Process. Procedia Manufacturing, 5, 205–219, DOI: 10.1016/j.promfg.2016.08.019.
Sivaram, A.R., Vinoth, V. Kumar, Umanath, K., Sarathkumar, P., and Rajavel, R. (2017). Optimization of machining parameters in wire cut edm usingtaguchi techniques. Journal of Advanced Research in Dynamical and Control Systems, 9(2) Special Issue, 883–897.
Zhang, S., Zhang, W., Wang, P., Liu, Y., Ma, F., Yang, D., and Sha, Z. (2019). Simulation of material removal process in EDM with composite tools. Advances in Materials Science and Engineering, DOI: 10.1155/2019/1321780.
