End-of-Life Vehicle Recovery Framework: An Industry Perspective on Auto Parts Reuse, Recycling, and Remanufacturing in Malaysia

Authors

  • Noraini Abdul Malek Universiti Kebangsaan Malaysia, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Malaysia
  • Dzuraidah Abd Wahab Universiti Kebangsaan Malaysia, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Malaysia
  • Zambri Harun Universiti Kebangsaan Malaysia, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Malaysia
  • Nurhasyimah Abd Aziz Universiti Kebangsaan Malaysia, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Malaysia
  • Abdul Hadi Azman Universiti Kebangsaan Malaysia, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Malaysia
  • Mohd Radzi Abu Mansor Universiti Kebangsaan Malaysia, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Malaysia

DOI:

https://doi.org/10.24425/mper.2025.154925

Keywords

end-of-life vehicle, ELV, reuse, recycle, auto part remanufacturing, sustainability, ELV recovery

Abstract

The rise of end-of-life vehicles (ELVs) in Malaysia highlights the urgent need for a sustain able recovery industry centered on reuse, recycling, and remanufacturing. Ineffective ELV management exacerbates waste generation, adversely affecting Sustainable Development Goal (SDG) 12 on responsible consumption and production. This study evaluated the current state of ELV reuse, recycling, and remanufacturing in Malaysia by selecting ten companies and employing a qualitative approach. Data were gathered through semi-structured interviews with industry stakeholders, supported by qualitative content analysis conducted in collaboration with a research team of industry experts. Responses were triangulated with direct observations during site visits. Key enablers for a sustainable framework were identified, including design strategies, adequate facilities, skilled labour, and efficient processes. The findings culminated in a sustainable ELV recovery framework emphasizing operational and stakeholder-driven perspectives. This framework is a roadmap for policymakers and industry players to align with regional sustainability goals.

References

Abu, M.Y., Jamaludin, K.R., Abdul Sani, A.S., Abdullah, T.A., & Wahab, D.A. (2013). Current situation in cleaning process of remanufacturing in Malaysia: A case study. Advanced Materials Research, 845, 904– 914. DOI: 10.4028/www.scientific.net/amr.845.904

Amelia, L., Wahab, D.A., Haron, C.H., Muhamad, N., & Azhari, C.H. (2009). Initiating automotive component reuse in Malaysia. Journal of Cleaner Production, 17 (17), 1572–1579. DOI: 10.1016/j.jclepro.2009.06.011

Aguilar Esteva, L.C., Kasliwal, A., Kinzler, M.S., Kim, H.C., Keoleian, G.A. (2021). Circular economy framework for automobiles: Closing energy and material loops. Journal of Industrial Ecology, 25(4), 877–889. DOI: 10.1111/jiec.13088

Azmi, M., Mat Saman, M.Z., Sharif, S., Zakuan, N., & Mahmood, S. (2013). Proposed framework for endof-life vehicle recycling system implementation in Malaysia. 10.14279/depositonce-3753.

Azmi, M., & Tokai, A. (2017). Electric vehicle and endof-life vehicle estimation in Malaysia 2040. Environment Systems and Decisions, 37 (4), 451–464. DOI: 10.1007/s10669-017-9647-4

Battaïa, O., Dolgui, A., Heragu, S.S., Meerkov, S.M., & Tiwari, M.K. (2018). Design for manufacturing and assembly/disassembly: joint design of products and production systems. International Journal of Production Research, 56 (24), 7181–7189. DOI: 10.1080/00207543.2018.1549795

Conseil Européen de Remanufacture (CER). (2017). Remanufacturing: A primer. Conseil Européen de Remanufacture (CER). https://www.remancouncil.eu/files/CER_Reman_Primer.pdf

Department of Standards Malaysia. (2018). MS 2697:2018 – Motor vehicle aftermarket – Repair, reuse, recycle and remanufacture (4R) for parts and components – Code of practice. Department of Standards Malaysia.

Fegade, V., Shrivatsava, R.L., & Kale, A.V. (2015). Design for remanufacturing: Methods and their approaches. Materials Today: Proceedings, 2 (4–5), 1849-1858. DOI: 10.1016/j.matpr.2015.07.130

Genta, G., Galetto, M., & Franceschini, F. (2018). Product complexity and design of inspection strategies for assembly manufacturing processes. International Journal of Production Research, 56 (11), 4056–4066. DOI: 10.1080/00207543.2018.1430907

Gerrard, J., & Kandlikar, M. (2007). Is European end-of-life vehicle legislation living up to expectations? Assessing the impact of the ELV Directive on “green” innovation and vehicle recovery. Journal of Cleaner Production, 15 (1), 17–27. DOI: 10.1016/j.jclepro.2005.06.004

Go, T.F., Wahab, D.A., Rahman, M.N.A., & Ramli, R. (2010). A design framework for end-of-life vehicles recovery: Optimization of disassembly sequence using genetic algorithms. American Journal of Environmental Sciences, 6 (4), 350–356. DOI: 10.3844/ajessp.2010.350.356

Go, T.F., Wahab, D.A., Fadzil, Z.F., Azhari, C.H., & Umeda, Y. (2016). Socio-technical perspective on endof-life vehicle recovery for a sustainable environment. International Journal of Technology, 7 (5), 889–897. DOI: 10.14716/ijtech.v7i5.2878

Golinska-Dawson, P., Werner-Lewandowska, K., & Kosacka-Olejnik, M. (2021). Responsible resource management in remanufacturing-framework for qualitative assessment in small and medium-sized enterprises. Resources, 10 (2), 1–17. DOI: 10.3390/resour ces10020019

Hammond, R., Amezquita, T., & Bras, B. (1998). Issues in automotive parts remanufacturing industry: Discussion of results from surveys performed among remanufacturers. Journal of Engineering Design and Automation, Special Issue on Environmentally Conscious Design and Manufacturing, 4 (1), 27–46.

Harun, Z., Wan Mustafa, W.M.S., Abd Wahab, D., Abu Mansor, M.R., Saibani, N., Ismail, R., Mohd Ali, H., Hashim, N.A., & Mohd Paisal, S.M. (2021). An analysis of end-of-life vehicle policy implementation in Malaysia from the perspectives of laws and public perception. Jurnal Kejuruteraan, 33 (3), 709–718. DOI: 10.17576/jkukm-2021-33(3)-29

Hiratsuka, J., Sato, N., & Yoshida, H. (2014). Current status and future perspectives in end-of-life vehicle recycling in Japan. Journal of Material Cycles and Waste Management, 16 (1), 21–30. DOI: 10.1007/s10163-013-0168-z

Ijomah, W.L., McMahon, C.A., Hammond, G.P., & Newman, S.T. (2007). Development of design for remanufacturing guidelines to support sustainable manufacturing. Robotics and Computer-Integrated Manufacturing, 23 (6), 712–719. DOI: 10.1016/j.rcim.2007.02.017

Jamaluddin, F., Saibani, N., Mohd Pisal, S.M., Wahab, D.A., Hishamuddin, H., Sajuri, Z., & Khalid, R.M. (2022). End-of-life vehicle management systems in major automotive production bases in Southeast Asia: A review. Sustainability, 14(21), 14317. DOI: 10.3390/su142114317

Jawahir, I.S., & Bradley, R. (2016). Technological elements of circular economy and the principles of 6R-based closed-loop material flow in sustainable manufacturing. Procedia CIRP, 40, 103–108. DOI: 10.1016/j.procir.2016.01.067

Kalverkamp, M., & Raabe, T. (2018). Automotive remanufacturing in the circular economy in Europe: Marketing system challenges. Journal of Macromarketing, 38 (1), 112–130. DOI: 10.1177/0276146717739066

Karagoz, S., Aydin, N., & Simic, V. (2020). End-of-life vehicle management: A comprehensive review. Journal of Material Cycles and Waste Management, 22, 416–442. DOI: 10.1007/s10163-019-00945-y

Karunarathna, K. L., & Gamage, J. R. (2022). Framework to Promote Automotive Remanufacturing: Case Study of Automotive Repairing, Rebuilding, and Remanufacturing Industry in Sri Lanka. MERCon 2022 – Moratuwa Engineering Research Conference, Proceedings. DOI: 10.1109/MERCon55799.2022.9906246

Lee, J.H., Kang, H.Y., Kim, Y.W., Hwang, Y.W., Kwon, S.G., Park, H.W., Choi, J.W., & Choi, H.H. (2023). Analysis of the life cycle environmental impact reductions of remanufactured turbochargers. Journal of Remanufacturing, 13 (2), 187–206. DOI: 10.1007/s13243-023-00127-y

Li, J., Yu, K., & Gao, P. (2014). Recycling and pollution control of the End of Life Vehicles in China. Journal of Material Cycles and Waste Management, 16 (1), 31–38. DOI: 10.1007/s10163-013-0226-6

Litwin, P., Gola, A., Wójcik, Ł., & Cioch, M. (2024). Optimization of the Flow of Parts in the Process of Brake Caliper Regeneration Using the System Dynamics Method. Processes, 12 (1), 1–17. DOI: 10.3390/pr12010016

Loh, W.L., Abdul Aziz, N., Abdul Wahab, D., Ab Rahman, M.N., Azahri, C.H. (2018). Enhancing remanufacturing efficiency in Malaysia through a knowledge support system: A case study of brake callipers. International Journal of Industrial and Systems Engineering, 28 (4), 451–467. DOI: 10.1504/IJISE.2018.090446

Matsumoto, M., & Umeda, Y. (2011). An analysis of remanufacturing practices in Japan. Journal of Remanufacturing, 1 (1), 0–11. DOI: 10.1186/2210-4690-1-2

Matsumoto, M., Yang, S., Martinsen, K., & Kainuma, Y. (2016). Trends and research challenges in remanufacturing. International Journal of Precision Engineering and Manufacturing – Green Technology. DOI: 10.1007/s40684-016-0016-4

Ministry of Human Resources. (2020). Malaysian Standard Classification of Occupations (MASCO) 2020. https://jtksm.mohr.gov.my/sites/default/files/2022-12/MASCO_2020_BI_Edaran.pdf

Ministry of International Trade and Industry (MITI). (2020). National Automotive Policy (NAP) 2020. Ministry of International Trade and Industry (MITI). https://www.miti.gov.my/miti/resources/NAP 2020/ NAP2020_Booklet.pdf

Mohamad-Ali, N., Raja Ghazilla, R.A., AbdulRashid, S.H., & Ahmad-Yazid, A. (2019). Aftermarket survey on end-of-life vehicle recovery in Malaysia: Key findings. Journal of Cleaner Production, 211, 468–480. DOI: 10.1016/j.jclepro.2018.11.165

Ngu, H. J., Lee, M. D., & Bin Osman, M. S. (2020). Review on current challenges and future opportunities in Malaysia sustainable manufacturing: Remanufacturing industries. Journal of Cleaner Production, 273, 123071. DOI: 10.1016/j.jclepro.2020.123071

NST Online. (2018, December 22). Local councils can soon tow away abandoned vehicles. NST Online. https: //www.nst.com.my/news/nation/2018/12/439247/local-councils-can-soon-tow-away-abandoned-vehicles

Östlin, J. (2008). On remanufacturing systems: Analysing and managing material flows and remanufacturing processes [Doctoral dissertation, Institutionen för Ekonomisk och Industriell Utveckling, Linköpings Universitet]. https://www.diva-portal.org/smash/get/diva2:18334/fulltext01.pdf

Othman, N., Razali, A., Chelliapan, S., Mohammad, R., & Kamyab, H. (2021). A design framework for an integrated end-of-life vehicle waste management system in Malaysia. Soft Computing Techniques in Solid Waste and Wastewater Management, 305–319. DOI: 10.1016/B978-0-12-824463-0.00021-5

Özceylan, E., Demirel, N., Çetinkaya, C., & Demirel, E. (2017). A closed-loop supply chain network design for automotive industry in Turkey. Computers and Industrial Engineering, 113, 727–745. DOI: 10.1016/j.cie.2016.12.022

Pizoń, J., Wójcik, Ł., Gola, A., Kański, Ł., & Nielsen, I. (2024). Autonomous Mobile Robots in Automotive Remanufacturing: A Case Study for Intra-Logistics Support. Advances in Science and Technology Research Journal, 18 (1), 213–230. DOI: 10.12913/22998624/177398

Raja Ghazilla, R.A., Sakundarini, N., Taha, Z., AbdulRashid, S.H., & Yusoff, S. (2015). Design for environment and design for disassembly practices in Malaysia: A practitioner’s perspectives. Journal of Cleaner Production, 108, 331–342. DOI: 10.1016/j.jclepro. 2015.06.033

Raja Mamat, T. N. A., Mat Saman, M. Z., Sharif, S., & Simic, V. (2016). Key success factors in establishing end-of-life vehicle management system: A primer for Malaysia. Journal of Cleaner Production, 135 (July), 1289–1297. DOI: 10.1016/j.jclepro.2016.06.183

Ropi, N.M., Hishamuddin, H., & Wahab, D.A. (2020). Analysis of the supply chain disruption risks in the Malaysian automotive remanufacturing industry – A case study. International Journal of Integrated Engineering, 12 (5), 1–11. DOI: 10.30880/ijie.2020. 12.05.001

Sakai, S.I., Yoshida, H., Hiratsuka, J. Vandecasteele, C., Kohlmeyer, R., Rotter, V. S., Passarini, F., Santini, A., Peeler, M., Li, J., Oh, G.J., Ngo, K.C., Bastian, L., Moore, S., Kajiwara, N., Takigami, H., Itai, T., Takahashi, S., Tanabe, S., Tomoda, K., et al. (2014). An international comparative study of end-of-life vehicle (ELV) recycling systems. Journal of Material Cycles & Waste Management, 16, 1–20. DOI: 10.1007/s10163- 013-0173-2

Sakundarini, N., Taha, Z., Ghazilla, R.A.R., & AbdulRashid, S.H. (2015). A methodology for optimizing modular design considering product end of life strategies. International Journal of Precision Engineering and Manufacturing, 16 (11), 2359–2367. DOI: 10.1007/s12541-015-0304-x

Shu, L., & Flowers, W. (1993). Structured approach to design for remanufacture. Intelligent Concurrent Design: Fundamentals, Methodology, Modeling and Practice, 66, 13–19. https://shulab.mie.utoronto.ca/wp-content/uploads/pubs/Conference/1993_ShuFlowers_WAM_StructuredDfReman.pdf

SME Corp. Malaysia. (2020). Guideline for SME definition. SME Corp. Malaysia.

Stolt, R., Elgh, F., & Andersson, P. (2017). Design for inspection – Evaluating the inspectability of aerospace components in the early stages of design. Procedia Manufacturing, 11, 1193–1199. DOI: 10.1016/j.promfg.2017.07.244

Umeda, Y. (1999). Key design elements for the inverse manufacturing. Proceedings of the First International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, 338–343. DOI: 10.1109/ECODIM.1999.747635

Vermeulen, I., Van Caneghem, J., Block, C., Baeyens, J., & Vandecasteele, C. (2011). Automotive shredder residue (ASR): Reviewing its production from end-oflife vehicles (ELVs) and its recycling, energy or chemicals’ valorisation. Journal of Hazardous Materials, 190 (1–3), 8–27. DOI: 10.1016/j.jhazmat.2011.02.088

Wang, L., Zhu, S., Evans, S., Zhang, Z., Xia, X., & Guo, Y. (2023). Automobile recycling for remanufacturing in China: A systematic review on recycling legislations, models and methods. Sustainable Production and Consumption, 36, 369–385. DOI: 10.1016/j.spc.2023.01.016

Yusop, N.M., Wahab, D.A., & Saibani, N. (2016). Realising the automotive remanufacturing roadmap in Malaysia: Challenges and the way forward. Journal of Cleaner Production, 112, 1910–1919. DOI: 10.1016/j.jclepro.2015.03.072

Downloads

Published

2025-06-30

How to Cite

Abdul Malek, Noraini, et al. “End-of-Life Vehicle Recovery Framework: An Industry Perspective on Auto Parts Reuse, Recycling, and Remanufacturing in Malaysia”. Management and Production Engineering Review, vol. 16, no. 2, June 2025, pp. [nr art. 3], s. 1-16, doi:10.24425/mper.2025.154925.

Issue

Vol. 16 No. 2 (2025)

Section

Artykuły