Acceptable Cutting Distance and Feed Rate Values for Sheet Metal Plasma Cutting

Armindo, J., Fonseca, A., Abreu, I., & Toldy, T. (2019). Perceived importance of sustainability dimensions in the Portuguese metal industry. International Journal of Sustainable Development & World Ecology, 26(2), 154-165. DOI: 10.1080/13504509.2018.1508524

Bakri, A.H., Rahim, A.R.A., Yusof, N.M., & Ahmad, R. (2012). Boosting Lean Production via TPM. Procedia, Social and Behavioral Sciences, 65(2012), 485–491. DOI: 10.1016/j.sbspro.2012.11.153

Berkey, J.O., & Wang, P.Y. (1987). Two-dimensional finite bin-packing algorithms. Journal of the Operational Research Society, 38(1987), 423–429. DOI: 10.1057/jors.1987.70

Boulos, M.I., Fauchais, P.L., & Pfender, E. (2023). Handbook of Thermal Plasmas. 1st ed. Switzerland: Springer International Publishing.

Cardoso, J.S., & Rodrigues, J.R.P. (2022). Analysis of the parameters of the plasma cutting process of stainless steel SAE 1515. Brazilian Journal of Development, 8(6), 43311–43325. DOI: 10.34117/bjdv8n6-053

Celesc (2024). Santa Catarina/Brazil power plants. Available from: https://www.celesc.com.br/

Chazelle, B. (1983). The Bottom-Left Bin-Packing Heuristic: An Efficient Implementation. IEEE Transactions on Computers, 32(8), 697–707. DOI: 10.1109/TC.1983.1676307

Čiarnien˙e R, & Vienažindien˙e M. (2012). Lean manufacturing: theory and practice. Economics and Management, 17(2), 726–732. DOI: 10.5755/j01.em.17.2.2205

Czerniachowska, K., Wichniarek, R., & Żywicki, K. (2023). Industry Expertise Heuristics for Dimensioning Shelf Space of Rack Storage Location in a Distribution Centre with Zone Picking. Management and Production Engineering Review, 14(1), 43–60. DOI: 10.24425/mper.2023.145365

Demailly, D., & Quirion, P. (2008). European Emission Trading Scheme and competitiveness: A case study on the iron and steel industry. Energy economics, v. 30(4), 2009–2027. DOI: 10.1016/j.eneco.2007.01.020

Dixit, A., Dave, V., & Singh, A.P. (2015). Lean manufacturing: An approach for waste elimination. International Journal of Engineering Research & Technology, 4, 2015. DOI: 10.17577/ijertv4is040817

Francescatto, M., Neuenfeldt Júnior, A.L., Silva, E., Furtado, J.C., & Bromberger, D. (2023a). Impact of minimum distance constraints on sheet metal waste for plasma cutting. Plos One, 18(9), e0292032. DOI: 10.1371/journal.pone.0292032

Francescatto, M., Neuenfeldt Júnior, A., Kubota, F.I., Guimarães, G., & Oliveira, B. (2023b). Lean Six Sigma case studies literature overview: critical success factors and difficulties. International Journal of Productivity and Performance Management, 72(1), 1–23. DOI: 10.1108/IJPPM-12-2021-0681

Glover, F. (1990). Tabu Search: A Tutorial. INFORMS Journal on Applied Analytics. 20(4), 74–94. DOI: 10.1287/inte.20.4.74

Gostimirović, M., Rodić, D., Sekulić, M., & Aleksić, A. (2020). An experimental analysis of cutting quality in plasma arc machining. Adv. Technol. Mater., 45, 1–8. DOI: 10.24867/ATM-2020-1-001

Gupta, S.K., Bourne, D.A., Kim, K.H., & Krishnan, S.S. (1998). Automated process planning for sheet metal bending operations. Journal of Manufacturing Systems, 17(5), 338–360. DOI: 10.1016/S0278-6125(98)80002-2

Gupta, S., & Jain, S.K. (2013). A literature review of lean manufacturing. International Journal of Management Science and Engineering Management, 8(4), 241–249. DOI: 10.1080/17509653.2013.825074

Hussain, S., Qazi, M.I., & Abas, M. (2024). Investigation and optimization of plasma arc cutting process parameters for AISI 304 by integrating principal component analysis and composite desirability method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(1), 33. DOI: 10.1007/s40430-023- 04614-y

Hyperterm (2018). Powermax45 XP operator manual. Available from: https://www.hypertherm.com/Download?fileId$=$HYP109170{&}zip$=$False. Accessed 19 June 2024

Hyperterm (2024). Powermax45 XP plasma cutter system. Available from: https://www.hypertherm.com. Accessed 19 June 2024

İrsel, G., & Güzey, B.N. (2021). Comparison of laser beam, oxygen and plasma arc cutting methods in terms of their advantages and disadvantages in cutting structural steels. Journal of Physics: Conference Series, 2130(1), 012022. DOI: 10.1088/1742-6596/2130/1/012022

Jakobs, S. (1996). On genetic algorithms for the packing of polygons. European Journal of Operational Research, 88(1), 165–181. DOI: 10.1016/0377-2217(94)00166-9

Júnior, A.N., & Guimarães, L.R. (2019). A greedy randomized adaptive search procedure application to solve the travelling salesman problem. International Journal of Industrial Engineering and Management, 10(3), 238–242. DOI: 10.24867/IJIEM-2019-3-243

Júnior, A.N., Silva, E., Francescatto, M., Rosa, C.B., & Siluk, J. (2022). The rectangular two-dimensional strip packing problem real-life practical constraints: A bibliometric overview. Computers & Operations Research, 137(2022), 105521. DOI: 10.1016/j.cor.2021.105521

Júnior, A.N., Francescatto, M., Araújo, O., Disconzi, D., & Stieler, G. (2023). The machining torch movement for the rectangular plasma sheet metal cut. Plos One, 18(9), e0291184. DOI: 10.1371/journal.pone.0291184

Kadirgama, K., Rahman, M.M., & Ghazali, Z. (2013). Optimization of Heat Affected Zone for Air Plasma Cutting Process: A Support Vector Machine Approach. International Journal of Artificial Intelligence and Mechatronics, 2(1), 13–18.

Lazarevic, A., & Lazarevic, D. (2017). Investigations of material hardness and structural changes in the heataffected zone during plasma cutting. Welding in the World, 61(2017), 1069–1075. DOI: 10.1007/s40194-017-0510-5

Lazarevic, A., & Lazarevic, D. (2022). Effects of plasma arc cutting process parameters on the cutting speed optimization based on the required cut quality. CIRP Journal of Manufacturing Science and Technology, 38(2022), 836–843. DOI: 10.1016/j.cirpj.2022.07.003

Magid, H.M. (2021). Experimental study of mild steel cutting process by using the plasma arc method. Journal of Achievements in Materials and Manufacturing Engineering, 108(2), 75–85. DOI: 10.5604/01.3001.0015.5066

Maity, K.P., & Bagal, D.K. (2015). Effect of process parameters on cut quality of stainless steel of plasma arc cutting using hybrid approach. The International Journal of Advanced Manufacturing Technology, 78(1), 161–175. DOI: 10.1007/s00170-014-6552-6

Majeske, K.D., & Hammett, P.C. (2003). Identifying sources of variation in sheet metal stamping. International Journal of Flexible Manufacturing Systems, 15(2003), 5–18. DOI: 10.1023/A:1023993806025

Masoudi, S., Mirabdolahi, M., Dayyani, M., Jafarian, F., Vafadar, A., & Dorali, M.R. (2019). Development of an intelligent model to optimize heat-affected zone, kerf, and roughness in 309 stainless steel plasma cutting by using experimental results. Materials and Manufacturing Processes, 34(3), 345–356. DOI: 10.1080/10426914.2018.1532579

Nemchinsky, V.A., & Severance, W.S. (2009). Plasma arc cutting: Speed and cut quality. Journal of Physics D: Applied Physics, 42(19), 195204. DOI: 10.1088/0022-3727/42/19/195204

Neuenfeldt Júnior, A., Silva, E., Miguel Gomes, A., & Oliveira, J.F. (2018). The two-dimensional strip packing problem: What matters?. Springer Proceedings in Mathematics and Statistics, 223, 151–164. DOI: 10.1007/978-3-319-71583-4_11

Neuenfeldt, A., Silva, E., Gomes, A.M., Soares, C., & Oliveira, J.F. (2019). Data mining based framework to assess solution quality for the rectangular 2D strippacking problem. Expert Systems with Applications, 118 (2019), 365–380. DOI: 10.1016/j.eswa.2018.10.006

Neuenfeldt Júnior, A., Cheiram, M., Eckhardt, M., Scheuer, C., Siluk, J., & Francescatto, M. (2021a). Additive and subtractive rapid prototyping techniques: A comparative analysis of FDM & CNC processes. International Journal of Industrial Engineering and Management, 12(4), 262–273. DOI: 10.24867/IJIEM2021-4-293

Neuenfeldt Júnior, A., Francescatto, M., Stieler, G., & Disconzi, D. (2021b). A multi-label transformation framework for the rectangular 2D strip-packing problem. Management and Production Engineering Review, 14(4), 27–37. DOI: 10.24425/mper.2021.139992

Neuenfeldt Júnior, A, Siluk, J., Francescatto, M, Stieler, G., & Disconzi, D. (2023). A framework to select heuristics for the rectangular two-dimensional strip packing problem. Expert Systems with Applications, 213(2023), 119202. DOI: 10.1016/j.eswa.2022.119202

Neuenfeldt Júnior, A., Nogueira, P., Francescatto, M., Siluk, J., De Paris, S., & Mandlhate, M. (2024). Application of a proposed additive manufacturing performance measurement system in a Brazilian industry. International Journal of Industrial Engineering & Management (IJIEM), 15(2). DOI: 10.24867/IJIEM2024-2-351

Ohno, T. (1988). Toyota production system: beyond largescale production. CRC Press, 1988.

Oliveira, J.F., Júnior, A.N., Silva, E. & Carravilla, M.A. (2016). A survey on heuristics for the two-dimensional rectangular strip packing problem. Pesquisa Operacional, 36(2), 197–226. DOI: 10.1590/0101-7438.2016.036.02.0197

Petunin, A.A., & Stylios, C. (2016). Optimization models of tool path problem for CNC sheet metal cutting machines. IFAC-PapersOnLine, 49(12), 23–28. DOI: 10.1016/j.ifacol.2016.07.544

Ramakrishnan, H., Balasundaram, R., Ganesh, N., & Karthikeyan, N. (2018). Experimental investigation of cut quality characteristics on SS321 using plasma arc cutting. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(2), 60. DOI: 10.1007/s40430-018-0997-8

Ramakrishnan, S., Gershenzon, M., Polivka, F., Kearney, T.N., & Rogozinski, M.W. (1997). Plasma generation for the plasma cutting process. IEEE Transactions on Plasma Science, 25(5), 937–946. DOI: 10.1109/27.649600

Sáenz, D.C., Castillo, N.G., Romeva, C.R., & Macià, J.L. (2015). A fuzzy approach for the selection of nontraditional sheet metal cutting processes. Expert Systems with Applications, 42(15–16), 6147–6154. DOI: 10.1016/j.eswa.2015.03.030

Salonitis K., & Vatousianos, S. (2012). Experimental investigation of the plasma arc cutting process. Procedia CIRP, v. 3(2012), 287–292. DOI: 10.1016/j.procir.2012.07.050

Schleuss, L., Richter, T., Ossenbrink, R., & Michailov, V. (2015). Plasma cutting of structured sheet metals in comparison with laser beam cutting. Journal of Materials Science and Engineering B, 5(3–4), 135–144. DOI: 10.17265/2161-6221/2015.3-4.004

Severo, E.A., Guimarães, J.C.F., & Dorion, E.C.H. (2017). Cleaner production and environmental management as sustainable product innovation antecedents: A survey in Brazilian industries. Journal of Cleaner Production, 142(2017), 87–97. DOI: 10.1016/j.jclepro.2016.06.090

Severo, E.A., Guimarães, J.C.F., Dorion, E.C.H., & Nodari, C.H. (2015). Cleaner production, environmental sustainability and organizational performance: an empirical study in the Brazilian Metal-Mechanic industry. Journal of Cleaner Production, 96(2015), 118–125. DOI: 10.1016/j.jclepro.2014.06.027

Singh S., Ramakrishna S., Gupta M.K. (2017). Towards zero waste manufacturing: A multidisciplinary review. Journal of Cleaner Production, 168(2017), 1230–1243. DOI: 10.1016/j.jclepro.2017.09.108

Thomas, D.J. (2011). Optimising plasma cut-edge properties for improving the durability of bridge structures. International Journal of Steel Structures, 11(4), 481-493. DOI: 10.1007/s13296-011-4007-6

Wäscher G., Haußner H., & Schumann H. (2007). An improved typology of cutting and packing problems. European Journal of Operational Research, 183(3), 1109–1130. DOI: 10.1016/j.ejor.2005.12.047

Zajac, A., & Pfeifer, T. (2006). Restricting the heataffected zone during the plasma cutting of highalloy steels. Welding International, 20(1), 5–9. DOI: 10.1533/wint.2006.3534

Zaky, N., Ahmed, M.Z., Alarjani, A., & Attia, E.A. (2023). Lean manufacturing implementation in iron and steel industries: Effect of wastes management on the production costs. Journal of Engineering, Design and Technology, 23(2), 525–545. DOI: 10.1108/JEDT-01-2023-0012