Mechanical Recycling of Waste from PET Bottles and Glass Polyester Composites

Authors

  • Joanna Brzeska Department of Industrial Products Quality and Chemistry, Gdynia Maritime University, Poland
  • Mariola Jastrzębska Department of Industrial Products Quality and Chemistry, Gdynia Maritime University, Poland
  • Magda Morawska Department of Industrial Products Quality and Chemistry, Gdynia Maritime University, Poland
  • Maciej Sienkiewicz Department of Polymer Technology, Gdansk University of Technology, Poland

DOI:

https://doi.org/10.24425/mper.2025.154931

Keywords

composite waste, post-consumer PET, mechanical recycling, thermoplastic composite

Abstract

Composites are used in many areas of the economy, especially in transport and green energy production. As a consequence, a large amount of composite waste is generated, which is difficult to recycle. In this study, an attempt was made to use the simplest and cheapest mechanical method to process post-consumer and post-production waste of coloured polyester and glass polyester composite, respectively. Composites were prepared by injection moulding, adding ground unsaturated polyester with glass fibre to shredded poly(ethylene terephthalate) (rPET). The effect of adding the glass polyester recyclate on selected mechanical (tensile and impact strength), thermal (using differential scanning calorimetry), surface (contact angle), and structural properties (using the Fourier infrared spectroscopy and optical microscopy) was determined. The research has demonstrated that it is possible to obtain in a simple way high quality, aesthetically pleasing and weather resistant landscaping products, such as fences and road posts, litter bins, benches, etc., from post-consumer coloured PET bottles and post-production waste glass polyester composites. Nevertheless, in order to obtain composites with better mechanical properties, the recyclates used need to undergo additional processing, e.g. by adding compatibilisers.

References

Al-Jabareen, A., Al-Bustami, H., Harel, H. & Marom, G. (2012). Improving the Oxygen Barrier Properties of Polyethylene Terephthalate by Graphite Nanoplatelets. Journal of Applied Polymer Science, 128(3). DOI: 10.1002/app.38302.

Alshammari, B.A., Hossain, M., Alenad, A.M., Alharbi, A.G. & AlOtaibi, B.M. (2022). Experimental and Theoretical Analysis of Mechanical Properties of Graphite/Polyethylene Terephthalate Nanocomposites. Polymers, 14, 1718. DOI: 10.3390/ polym14091718.

Awaja, F. & Pavel, D. (2005). Recycling of PET. European Polymer Journal, 41, 7, 1453–1477. DOI: 10.1016/j.eurpolymj.2005.02.005.

Bahramian, A. (2021). Poly(ethylene terephthalate)-based nanocomposite films as greenhouse covering material: Environmental sustainability, mechanical durability, and thermal stability. Journal of Applied Polymer Science, 138, e49991. DOI: 10.1002/app.49991.

Benke, A., Sonnenberg, J., Oelschlägel, K., Schneider, M., Lux, M. & Potthoff, A. (2022). Wettability after Artificial and Natural Weathering of Polyethylene Terephthalate. Environments, 9, 134. DOI: 10.3390/environments9110134.

Bocz, K., Ronkay, F., Decsova, K.E., Molnár, B. & Marosi, G. (2021). Application of low-grade recyclate to enhance reactive toughening of poly(ethylene terephthalate). Polymer Degradation and Stability, 185, 109505. DOI: 10.1016/j.polymdegradstab.2021.109505.

Giraldi, A.L.F. de M., Bartoli, J.R., Velasco, J.I. & Mei, L.H.I. (2005). Glass fibre recycled poly(ethylene terephthalate) composites: mechanical and thermal properties. Polymer Testing, 24, 507–512. DOI: 10.1016/j.polymertesting.2004.11.011.

Gonçalves, R.M., Martinho, A. & Oliveira, J.P. (2022). Recycling of Reinforced Glass Fibers Waste: Current Status. Materials 15(4), 1596. DOI: 10.3390/ma15041596.

Hideky, P.-C., Aurelio, R.-H., Angel, M.-F., Alejandro, A.S., Eduardo, B.-G.J., Rangel-Porras, G. & Zamudio-Flores, P.B. (2024). Chemical modification of rubber with in situ degradation of PET and the production of its biodegradable films with starch. Polymer Bulletin, June. DOI: 10.1007/s00289-024-05363-1.

Huq, T., Khan, A., Akter, T., Noor, N., Dey, K., Sarker, B., Saha, M. & Khan, R.A. (2011). Thermomechanical, Degradation, and Interfacial Properties of Jute Fiber-reinforced PET-based Composite. Journal of Thermoplastic Composite Materials, 24(6). DOI: 10.1177/0892705711401846.

ICIS. (2024). European R-PET market view. https://www.icis.com/explore/resources/news/2022/02/04/10731017/video-europe-r-pet-faces-more-upwardspressure-in-february/?news_id=11020634 (Accessed: 01.08.2024).

Independent Commodity Intelligence Services. (2022). PET market in Europe state of play, production, collection & recycling data. https://www.petcoreeurope.org/news-events/409-pet-market-in-europestate-of-play-2022.html (Accessed: 01.08.2024).

Jaime-Aziare, A., Longo, E., Boselli, E., Baratieri, M. & Pedersen, T. H. (2024). Exploratory DSC investigation on the solvolytic depolymerization of PET in varied solvent systems and in the presence of model additives and contaminants. Polymer Degradation and Stability, 224, 110751. DOI: 10.1016/j.polymdegradstab.2024.110751.

Krauklis, A.E., Karl, C.W., Gagani, A.I. & Jorgensen, J.K. (2021). Composite Material Recycling Technology- State-of-the-Art and Sustainable Development for the 2020s. J. Compos. Sci., 5(1), 28. DOI: 10.3390/jcs5010028.

Królikowski, M., Fotek, M., Żach, P. & Michałowski, M. (2024). Development of a Recycling Process and Characterization of EVA, PVDF, and PET Polymers from End-of-Life PV Modules, PV Modules. Materials, 17(4), 821. DOI: 10.3390/ma17040821.

Kruszelnicka, I., Ginter-Kramarczyk, D., Rudawska, A., Zajchowski, S. & Tomaszewska, J. (2017). Contact angle assessment of wood-polymer composites treated with activated sludge (in Polish). Polimery, 62 (3), 208–214. DOI: 10.14314/polimery.2017.208.

Manikumar, R. & Rao, N. (2024). Comparative FTIR analysis of liquid and cured forms of ortho unsaturated polyester resin and flame-retardant resin: investigating chemical structure transformations. China Petroleum Processing and Petrochemical Technology, Catalyst Research, 24(1), February, 91–116. https://zgsyjgysyhgjs.cn/index.php/reric/article/pdf/2024-91.pdf (Accessed: 01.08.2024).

MarketsandMarkets™. (2024). Sustainable Manufacturing Market Global Forecast to 2029. April. www. marketsandmarkets.com. (Accessed: 01.08.2024).

Mecozzi, M. & Nisini, L. (2019). The differentiation of biodegradable and non-biodegradable polyethylene terephthalate (PET) samples by FTIR spectroscopy: A potential support for the structural differentiation of PET in environmental analysis. Infrared Physics & Technology, 101, September, 119–126. DOI: 10.1016/j.infrared.2019.06.008.

Meira Castro, A.C., Ribeiro, M.C.S., Santos, J., Meixedo, J.P., Silva, F.J.G., Fiuza, A., Dinis, M.L. & Alvim, M.R. (2013). Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry. Construction and Building Materials, 45, 87–94. DOI: 10.1016/j.conbuildmat.2013.03.092.

Mettler-Toledo, A.G. (2011). Thermal analysis of polymers. Part 1: DSC of thermoplastics. Thermal Analysis Application No. UC 311. https://www.mt.com/my/en/home/supportive_content/matchar_apps/MatChar_UC311.html (Accessed: 01.08.2024).

Mondadori, N.M.L., Nunes, R.C.R., Canto, L.B. & Zattera, A.J. (2011). Composites of Recycled PET Reinforced with Short Glass Fiber. Journal of Thermoplastic Composite Materials, 25(6), 747–764. DOI: 10.1177/0892705711412816.

Monti, M., Scrivani, M.T., Kociolek, I., Larsen, A.G., Olafsen, K. & Lambertini, V. (2021). Enhanced Impact Strength of Recycled PET/Glass Fiber Composites. Polymers, 13, 1471. DOI: 10.3390/polym13091471.

Muringayil, J.T., Azat, S., Ahmadi, Z., Jazani, O.M., Esmaeili, A., Kianfarf, E., Haponiuk, J. & Thomas S. (2024). Polyethylene terephthalate (PET) recycling: A review. Case Studies in Chemical and Environmental Engineering, 9, 100673. DOI: 10.1016/j.cscee.2024.100673.

Olam, M. (2023). Mechanical and Thermal Properties of HDPE/PET Microplastics, Applications, and Impact on Environment and Life. In: Advances and Challenges in Microplastics. Edition El-Sayed Salama, IntechOpen 2023. DOI: 10.5772/intechopen.104368.

Palmer, J., Ghita, O.R., Savage, L. & Evans, K.E. (2009). Successful closed-loop recycling of thermoset composites. Composites Part A: Applied Science and Manufacturing, 40(4), 490–498. DOI: 10.1016/j.compositesa.2009.02.002.

Plastics Europe. (2024). Report The Circular Economy for Plastics – A European analysis. March 1–24. https://plasticseurope.org/wp-content/uploads/2024/03/CEreport_executivesummary_2024.pdf (Accessed: 01.08.2024).

Polish Investment & Trade Agency. (2023). TheYachts-Recreational-Boating-Sector-2023. https://www.paih.gov.pl/wp-content/uploads/2024/02/The-Yachts-Recreational-Boating-Sector-2023.pdf (Accessed: 01.08.2024).

Primc G., Mozetič M. (2022). Hydrophobic Recovery of Plasma-Hydrophilized Polyethylene Terephthalate Polymers. Polymers, 14 (12), 2496. DOI: 10.3390/polym14122496.

Schyns, Z.O.G., Patel, A.D. & Shaver, M.P. (2023). Understanding poly(ethylene terephthalate) degradation using gas-mediated simulated recycling. Resources, Conservation & Recycling, 198, 107170. DOI: 10.1016/j.resconrec.2023.107170.

Sim, J.H., Yu, S.H., Yoon, H.S., Kwon, D.J., Lee, D.H. & Bae, J.S. (2021). Characteristic evaluation and finite element analysis of glass fiber/recycled polyester thermoplastic composites by cross-sectional shape of glass fiber. Composites Part B, 223, 109095. DOI: 10.1016/j.compositesb.2021.109095.

Statista Research Department. (2024). Global market volume of PET 2015-2030. https://www.statista.com/statistics/1245264/polyethylene-terephthalatemarket-volume-worldwide/ (Accessed:01.08.2024).

Tariq, A., Afzal, A., Rashid, I.A. & Shakir, M.F. (2020). Study of thermal, morphological, barrier and viscoelastic properties of PP grafted with maleic anhydride (PP-g-MAH) and PET blends. Journal of Polymer Research, 27, 309. DOI: 10.1007/s10965-020-02291-2.

Vozniak, A., Hosseinnezhad, R., Vozniak, I. & Galeski, A. (2024). PET mechanical recycling. A new principle for chain extender introduction. Sustainable Materials and Technologies, 40, July, e00886. DOI: 10.1016/ j.susmat.2024.e00886.

Witten, E. & Mathes, V. (2024). The European market for Fiber-Reinforced Plastics /Composites 2023. Market developments, trends, challenges and prospects 2024. https://eucia.eu/wp-content/uploads/2024/05/avk_marketreport_2024_final_eng.pdf (Accessed: 01.08.2024).

Downloads

Published

2025-06-30

How to Cite

Brzeska, Joanna, et al. “Mechanical Recycling of Waste from PET Bottles and Glass Polyester Composites”. Management and Production Engineering Review, vol. 16, no. 2, June 2025, pp. [nr art. 9], s. 1-12, doi:10.24425/mper.2025.154931.

Issue

Vol. 16 No. 2 (2025)

Section

Artykuły