Oddziaływanie kontaktowe między powłoką ze stali falistej a zasypką gruntową określone na podstawie pomiarów odkształceń powłoki

Autor

  • Czesław Machelski Wrocław University of Science and Technology, Faculty of Civil Engineering, Wrocław, Poland
  • Leszek Korusiewicz Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Wrocław, Poland

DOI:

https://doi.org/10.24425/ace.2021.136461

Abstrakt

Charakterystyczną cechą konstrukcji gruntowo-powłokowych, w odróżnieniu od klasycznych mostów, jest duży wpływ zasypki gruntowej i nawierzchni jezdni jako elementów nośnych obiektu. W modelu obiektu gruntowo-powłokowego wyróżnia się dwa podukłady konstrukcyjne: powłokę z blachy falistej oraz zasypkę gruntową z nawierzchnią. Współdziałanie pomiędzy nimi modeluje się jako oddziaływanie kontaktowe, czyli siły o kierunku normalnym i stycznym do powierzchni powłoki. Oddziaływania te są zmienne w czasie budowy jak również podczas eksploatacji. W pracy podano dwa algorytmy wyznaczania sił kontaktowych. W pierwszym na podstawie odkształceń jednostkowych określa się siły wewnętrzne w powłoce a stąd oddziaływania kontaktowe. Do obliczeń niezbędna jest duża liczba punktów pomiarowych rozmieszczonych na paśmie obwodowym powłoki. W drugim algorytmie wykorzystuje się warunek kolokacji polegający na tym, że wynik obliczeń uzyskany z modelu geometrii powłoki ma być zgodny w rezultatem pomiaru przemieszczenia punktu kolokacyjnego obiektu. Gdy takich punktów jest więcej oszacowanie wyniku jest dokładniejsze. Zaletą obydwu algorytmów jest uwzględnienie cech fizycznych gruntu w warstwach zasypki a przede wszystkim technologii jej układania i zagęszczania. Wyniki tych analiz mogą być podstawą do porównań skuteczności klasycznych modeli geotechnicznych. Chociaż zależność między siłami kontaktowymi a deformacją powłoki jest znana, to procedury określenia oddziaływań kontaktowych na podstawie doświadczalnie wyznaczonych odkształceń czy też przemieszczeń powłoki nie są ściśle opisane. Celem pracy było przedstawienie takich procedur na przykładzie dwóch różnych obiektów gruntowo-powłokowych.

Bibliografia

1. T.J. McGrath, “Development of design and analysis methods for buried culverts”, Transportation Research Circular, Number E-C230, 1-12, March 2018.

2. M.G. Katona, “History of soil-structure interaction models for buried culverts”, Transportation Research Circular, Number E-C230, 13-20, March 2018.

3. T.C. Sandford, “Soil-structure interaction of buried structures”, Transportation in the New Millennium, TRB, 2000.

4. O. Abuhajar, M.H. El Naggar, T. Newson, “Comparison of soil pressure measurements around square box culverts using different techniques”, Conference Paper: 69th Canadian Geotechnical Conference, Vancouver, BC, Canada, October 2016.

5. J. Kang, F. Parker, C.H. Yoo, “Soil-structure interaction for deeply buried corrugated steel pipes. Part I: Embankment installation”, Engineering Structures 30(2): 384-392, 2008.

6. M.X. Zhang, B.D. Liu, P.F. Li, Z.M. Feng, “Structure-soil interaction of buried corrugated steel arch bridge”, Advanced Materials Research 163-167: 2112-2117, 2011.

7. M. Kumar, M.D. Goel, V.A. Matsagar, K.S. Rao, “Response of semi-buried structures subjected to multiple blast loading considering soil-structure interaction”, Indian Geotechnical Journal 45(3): 243-253, 2015.

8. A.M. Abdel-Karim, M.K. Tadros, J.V. Benak, “Structural response of full-scale concrete box culvert”, Journal of Structural Engineering 119(11): 3238-3254, 1993.

9. J. Kang, F. Parker, C.H. Yoo, “Soil-structure interaction and imperfect trench installations for deeply buried corrugated polyvinyl chloride pipes”, Transportation Research Record: Journal of the Transportation Research Board 2028 (1): 192-202, 2007.

10. W.S. Yu, Z.L. Li, X.R. Xie, L.Y. Guo, “Experimental study on earth pressure of corrugated steel culvert under high fill embankment”, Applied Mechanics and Materials 405-408: 1815-1819, 2013.

11. E. Bayoğlu Flener, “Soil-steel interaction of long-span box culverts-performance during backfilling”, Journal of Geotechnical and Geoenvironmental Engineering 136(6): 823-832, 2010.

12. B. Liu, Z. Wang, W. Xu, H. Sun, X. Wang, “Comparative experimental study and FE analysis of corrugated steel pipe culverts with different stiffness”, The Open Civil Engineering Journal 10: 549-563, 2016.

13. B. Liu, M. Zhang, P. Li, Z. Feng, “Effect of parameters on soil-structure interaction of a buried corrugated steel arch bridge”, The Open Civil Engineering Journal 5: 154-162, 2011.

14. M. McVay, P. Papadopoulos, “Long term behavior of buried large-span culverts”, Journal of Geotechnical Engineering 112(4): 424-442, 1986.

15. J. Vaslestad, B. Kunecki, T.H. Johansen, “Twenty one years of earth pressure measurements on buried flexible steel structure”, Archiwum Instytutu Inżynierii Lądowej/Archives of Institute of Civil Engineering (1): 233-244, 2007.

16. M.R. Ahmed, V.D.H. Tran, M.A. Meguid, “On the role of geogrid reinforcement in reducing earth pressure on buried pipes: experimental and numerical investigations”, Soils and Foundations 55(3): 588-599, 2015.

17. J. Kang, F. Parker, C.H. Yoo, “Soil-structure interaction for deeply buried corrugated steel pipes. Part II: Imperfect trench installation”, Engineering Structures 30(3): 588-594, 2008.

18. B. Kunecki, “Full-scale test of corrugated steel culvert and FEM analysis with various static systems”, Studia Geotechnica et Mechanica 28(2): 39-54, 2006.

19. L. Korusiewicz, B. Kunecki, “On boundary conditions in experimental and numerical models of steel culverts”, in: W. Pietraszkiewicz, C. Szymczak (Eds.), Shell Structures: Theory and Applications, Taylor & Francis Group, London, 573-576, 2005.

20. M.C. Palmer, T.D. O’Rourke, N.A. Olson, T. Abdoun, D. Ha, M.J. O’Rourke, “Tactile Pressure Sensors for Soil- Structure Interaction Assessment”, Journal of Geotechnical and Geoenvironmental Engineering 135(11): 1638-1645, 2009.

21. M.L. Talesnick, H.-W. Xia, I.D. Moore, “Earth pressure measurements on buried HDPE pipe”, Geotechnique 61(9): 721-732, 2011.

22. R.W.I. Brachman, I.D. Moore, R.K. Rowe, “The design of a laboratory facility for evaluating the structural response of small-diameter buried pipes”, Canadian Geotechnical Journal 37(2): 281-295, 2000.

23. C. Machelski, L. Janusz, P. Tomala, K. Wiliams, “Deformation parameters of deep corrugated soil-steel structures”, in: Transportation Research Board 97th Annual Meeting, Washington DC, United States, 2018, Paper Number: 18-05399.

24. B. Kunecki, L. Janusz, L. Korusiewicz, K. Wiliams, “Field tests of deep corrugated super-span metal arch during backfilling”, in: Transportation Research Board 97th Annual Meeting, Washington DC, United States, 2018, Paper Number: 18-03926.

25. B. Bakht, “Evaluations of the design methods for soil-steel structures in Canada”, Archiwum Instytutu Inżynierii Lądowej/Archives of Institute of Civil Engineering (1): 7-22, 2007.

26. W.S. Szajna, “Numerical model for the analysis of construction process of soil-steel culverts”, Archiwum Instytutu Inżynierii Lądowej/Archives of Institute of Civil Engineering (1): 215-223, 2007.

27. C. Machelski, “Estimation of internal forces in the shell of soil-steel structures on the basis of its displacements during backfilling”, Studia Geotechnica et Mechanica 31(1): 19-38, 2009.

28. C. Machelski, “Kinematic method for determining influence function of internal forces in the steel shell of soil-steel bridge”, Studia Geotechnica et Mechanica 32(3): 27-40, 2010.

29. C. Machelski, “Dependence of deformation of soil-shell structure on the direction of load passage”, Roads and Bridges 13(3): 223-233, 2014.

30. C. Machelski, “Dead load effect of bridges constructed with cantilever concreting technology”, Architecture Civil Engineering Environment 12(1): 109-120, 2019.

31. C. Machelski, “Soil-steel structure shell displacement functions based on tensometric measurements”, Studia Geotechnica et Mechanica 40(3): 170-179, 2018.

32. C. Machelski, P. Tomala, “Investigation of displacements function in soil-steel bridge based on strain gauges measurements”. in: Steel Bridges, 9th International Symposium on Steel Bridges, Czech Constructional Steelwork Association, European Convention for Constructional Steelwork, Prague, 1-18, 2018.

33. H. Müller-Breslu, “Erddruck auf Stützmauern”, Alfred Kröner Verlag, Stuttgart, 1906 (in German)

34. C. Machelski, L. Janusz, “Application of results of tests in developing a two-dimensional model for soil-steel railway bridges”, Transportation Research Record: Journal of the Transportation Research Board 2656(1): 53-60, 2017.

35. C. Machelski, “Estimation of the interaction effects of backfill on the shell in the soil-steel structure based on deformation of the shell”, Przegląd Komunikacyjny 71(11): 31-36, 2016.

36. M. L. Silver, H. B. Seed, “Volume Changes in Sands during Cyclic Loading”, Journal of the Soil Mechanics and Foundations Division 97(9): 1171-1182, 1971.

37. M. Sobótka, “Numerical simulation of hysteretic live load effect in soil-steel bridge”, Studia Geotechnica et Mechanica 36(1): 103-109, 2014.

38. K. White, S. Sargand, T. Massada, “Evaluation of load rating procedure for metal culverts under shallow soil covers”, Archiwum Instytutu Inżynierii Lądowej / Archives of Institute of Civil Engineering (23): 311-323, 2017.

Opublikowane

2021-03-30

Jak cytować

Machelski, Czesław, i Leszek Korusiewicz. „Oddziaływanie Kontaktowe między powłoką Ze Stali Falistej a Zasypką Gruntową określone Na Podstawie pomiarów odkształceń powłoki”. Archives of Civil Engineering, t. 67, nr 1, marzec 2021, s. 57-79, doi:10.24425/ace.2021.136461.

Numer

Dział

Articles

Podobne artykuły

1 2 3 4 5 6 7 8 9 10 > >> 

Możesz również Rozpocznij zaawansowane wyszukiwanie podobieństw dla tego artykułu.