English
Język Polski
Trójwymiarowe drukowanie z betonu – regionalne możliwości i wyzwania
DOI:
https://doi.org/10.24425/ace.2025.155121Abstrakt
Artykuł ma na celu zidentyfikowanie naukowych i przemysłowych perspektyw rozwoju druku 3D z betonu, ze szczególnym uwzględnieniem potencjału regionalnego. Główną metodą badawczą było studium literatury przedmiotu wzbogacone o ankietę bibliometryczną i analizę dotyczącą środków ochrony własności intelektualnej. Na potrzeby badania bibliometrycznego zebrano szczegółowe dane na temat publikacji dotyczących wytwarzania przyrostowego betonu. Zebrane informacje obejmowały między innymi: rok publikacji, zakres, autorów wraz z afiliacjami, cytowania itp. Dane zostały przeanalizowane w zadanych zbiorach i podzbiorach w celu identyfikacji wzajemnych relacji i ścieżek wpływu. Jako narzędzie pomocnicze do studium, utworzono chmurę tagów i przeprowadzono jej analizę. Ponadto, przeanalizowano bazę danych patentów oraz dokumentów dotyczących ochrony własności intelektualnej odnoszących się do drukowania z betonu, aby zapewnić pewien wgląd w potencjał do wdrożeń przemysłowych i komercjalizacji. Wyniki pozwoliły stwierdzić, które aspekty wydają się być najbardziej istotne dla rozwoju nauki i zastosowania druku 3D z betonu. Określono propozycje kierunków dla dalszych badań, biorąc pod uwagę również wdrożenia przemysłowe. Przedstawione wyniki mogą być wykorzystane jako wytyczne dla partnerów naukowych i przemysłowych z regionu.Bibliografia
[1] Y. Shi, Ch. Yan, Y. Zhou, J. Wu, Y. Wang, S. Yu, and Y. Chen, “Overview of additive manufacturing technology and materials”, in Materials for Additive Manufacturing. 3D Printing Technology Series. Elsevier Ltd., 2021, pp. 1-8, doi: 10.1016/B978-0-12-819302-0.00001-8.
[2] R. Modupe Mahamood, T.C. Jen, S.A. Akinlabi, S. Hassan, K.O. Abdulrahman, and E.T. Akinlabi, “Role of additive manufacturing in the era of Industry 4.0”, in Woodhead Publishing Reviews: Mechanical Engineering Series, Additive Manufacturing, M. Manjaiah, K. Raghavendra, N. Balashanmugam, J. Paulo Davim, Eds. Woodhead Publishing, 2021, pp. 107-126, doi: 10.1016/B978-0-12-822056-6.00003-5.
[3] ISO/ASTM 52900:2021(E) Additive manufacturing – General principles – Fundamentals and vocabulary. ISO/ASTM International, 2021.
[4] R. van Woensel, T. van Oirschot, M. Burgmans, M. Mohammadi, and K. Hermans, “Printing Architecture: An Overview of Existing and Promising Additive Manufacturing Methods and Their Application in the Building Industry”, The International Journal of the Constructed Environment, vol. 9, no. 1, 2018, doi: 10.18848/2154-8587/CGP/v09i01/57-81.
[5] J. Pegna, “Exploratory investigation of solid freeform construction”, Automation in Construction, vol. 5, no. 5, pp. 427-437, 1997, doi: 10.1016/S0926-5805(96)00166-5.
[6] Y. Chen, S. He, Y. Gan, O. Çopuroğlu, F. Veer, and E. Schlangen, “A review of printing strategies, sustainable cementitious materials and characterization methods in the context of extrusion-based 3D concrete printing”, Journal of Building Engineering, vol. 45, 2022, doi: 10.1016/j.jobe.2021.103599.
[7] A. Tofiluk, “Problems and challenges of the built environment and the potential of prefabricated architecture”, Archives of Civil Engineering, vol. 69, no. 3, pp. 405-424, 2023, doi: 10.24425/ace.2023.146088.
[8] “A milestone for 3D concrete printing. 3D printed house”. [Online]. Available: https://mense-korte.de/en/3dprinted-house. [Accessed: 24. May. 2024].
[9] L. Breseghello and R. Naboni, “Toolpath-based design for 3D concrete printing of carbon-efficient architectural structures”, Additive Manufacturing, vol. 56, 2022, doi: 10.1016/j.addma.2022.102872.
[10] M.K. Mohan, A.V. Rahul, G. De Schutter, and K.V. Tittelboom, “Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review ”, Cement and Concrete Composites, vol. 115, 2021, doi: 10.1016/j.cemconcomp.2020.103855.
[11] S. Bhooshan, T. Van Mele, Pand . Block, “Morph & Slerp: Shape description for 3D printing of concrete”, in Proceedings of the 5th Annual ACM Symposium on Computational Fabrication (SCF ’20). New York: Association for Computing Machinery, 2020, pp. 1-10, doi: 10.1145/3424630.3425413.
[12] R.A. Buswell, W.R. Leal de Silva, S.Z. Jones, and J. Dirrenberger, “3D printing using concrete extrusion: A roadmap for research”, Cement and Concrete Research, vol. 112, pp. 37-49, 2018, doi: 10.1016/j.cemconres.2018.05.006.
[13] G. Ma, R. Buswell, W.R. Leal da Silva, L. Wang, J. Xu, and S.Z. Jones, “Technology readiness: A global snapshot of 3D concrete printing and the frontiers for development”, Cement and Concrete Research, vol. 156, 2022, doi: 10.1016/j.cemconres.2022.106774.
[14] M. Wesolowski, M. Ruchwa, and S. Rucevskis, “Nonlinear static analysis of truss core sandwich beams in three-point bending test”, Archives of Civil Engineering, vol. 69, no. 4, pp. 459-475, 2023, doi: 10.24425/ace.2023.147670.
[15] A. Pritchard, “Statistical bibliography or bibliometrics?”, Journal of Documentation, vol. 25, no. 4, pp. 348-349, 1969.
[16] O. Ellegaard and J.A. Wallin, “The bibliometric analysis of scholarly production: How great is the impact?”, Scientometrics, vol. 105, pp. 1809-1831, 2015, doi: 10.1007/s11192-015-1645-z.
[17] O. José de Oliveira, F. Francisco da Silva, F. Juliani, L. César Ferreira Motta Barbosa, and T. Vieira Nunhes, “Bibliometric Method for Mapping the State-of-the-Art and Identifying Research Gaps and Trends in Literature: An Essential Instrument to Support the Development of Scientific Projects”, in Scientometrics Recent Advances, S. Kunosic and E. Zerem, Eds. IntechOpen, 2019, doi: 10.5772/intechopen.85856.
[18] “Advanced Search Query Builder”. [Online]. Available: https://www.webofscience.com/wos/woscc/advancedsearch. [Accessed: 13. Nov. 2023].
[19] N.J. van Eck and L. Waltman, “Software survey: VOSviewer, a computer program for bibliometric mapping”, Scientometrics, vol. 84, pp. 523-538, 2010, doi: 10.1007/s11192-009-0146-3.
[20] C. Birkle, D.A. Pendlebury, J. Schnell, and J. Adams, “Web of Science as a data source for research on scientific and scholarly activity”, Quantitative Science Studies, vol. 1, no. 1, pp. 363-376, 2020, doi: 10.1162/qss_a_00018.
[21] A. Maddi and L. Baudoin, “The quality of the web of science data: a longitudinal study on the completeness of authors-addresses links”, Scientometrics, vol. 127, pp. 6279-6292, 2022, doi: 10.1007/s11192-022-04525-0.
[22] “Interreg Central Europe”. [Online]. Available: https://interreg.eu/programme/interreg-central-europe/. [Accessed: 10. Nov. 2023].
[23] N. Roussel, “Rheological requirements for printable concretes”, Cement and Concrete Research, vol. 112, pp. 76-85, 2018, doi: 10.1016/j.cemconres.2018.04.005.
[24] Y. Zhang, Y. Zhang, W. She, L. Yang, G. Liu, and Y. Yang, “Rheological and harden properties of the high-thixotropy 3D printing concrete”, Construction and Building Materials, vol. 201, pp. 278-285, 2019, doi: 10.1016/j.conbuildmat.2018.12.061.
[25] J.J. Sokołowska, P. Woyciechowski, and M. Kalinowski, “Rheological Properties of Lunar Mortars”, Applied Sciences, vol. 11, no. 15, art. no. 6961, 2021, doi: 10.3390/app11156961.
[26] A.V. Rahul, M. Santhanam, H. Meena, and Z. Ghani, “Mechanical characterization of 3D printable concrete”, Construction and Building Materials, vol. 227, 2019, doi: 10.1016/j.conbuildmat.2019.116710.
[27] P. Feng, X. Meng, J.-F. Chen, and L. Ye, “Mechanical properties of structures 3D printed with cementitious powders”, Construction and Building Materials, vol. 93, pp. 486-497, 2015, doi: 10.1016/j.conbuildmat.2015.05.132.
[28] A.J. Babafemi, J.T. Kolawole, M.J. Miah, S.C. Paul, and B. Panda, “A Concise Review on Interlayer Bond Strength in 3D Concrete Printing”, Sustainability, vol. 13, no. 13, art. no. 7137, 2021, doi: 10.3390/su13137137.
[29] R. Napolitano, D. Forni, C. Menna, D. Asprone, and E. Cadoni, “Dynamic characterization of the layer-interface properties of 3D-printed concrete elements”, Case Studies in Construction Materials, vol. 15, 2021, doi: 10.1016/j.cscm.2021.e00780.
[30] L. Yang, S.M.E. Sepasgozar, S. Shirowzhan, A. Kashani, and D. Edwards, “Nozzle criteria for enhancing extrudability, buildability and interlayer bonding in 3D printing concrete”, Automation in Construction, vol. 146, 2023, doi: 10.1016/j.autcon.2022.104671.
[31] H. Chen, D. Zhang, P. Chen, N. Li, and A. Perrot, “A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing”, Materials, vol. 16, no. 7, art. no. 2661, 2023, doi: 10.3390/ma16072661.
[32] M. Papachristoforou, V. Mitsopoulos, and M. Stefanidou, “Evaluation of workability parameters in 3D printing concrete”, Procedia Structural Integrity, vol. 10, pp. 155-162, 2018, doi: 10.1016/j.prostr.2018.09.023.
[33] S. Alonso-Canon, E. Blanco-Fernandez, D. Castro-Fresno, A.I. Yoris-Nobile, and L. Castañon-Jano, “Reinforcements in 3D printing concrete structures”, Archives of Civil and Mechanical Engineering, vol. 23, art no. 25, 2023, doi: 10.1007/s43452-022-00552-z.
[34] F. Bester, M. van den Heever, J. Kruger, and G. van Zijl, “Reinforcing digitally fabricated concrete: A systems approach review”, Additive Manufacturing, vol. 37, 2021, doi: 10.1016/j.addma.2020.101737.
[35] V. Mechtcherine and V.N. Nerella, “Integration der Bewehrung beim 3D-Druck mit Beton”, Beton- und Stahlbetonbau, vol. 113, no. 7, pp. 496-504, 2018, doi: 10.1002/best.201800003.
[36] C. Zhang, V.N. Nerella, A. Krishna, S. Wang, Y. Zhang, V. Mechtcherine, and N. Banthia, “Mix design concepts for 3D printable concrete: A review”, Cement and Concrete Composites, vol. 122, 2021, doi: 10.1016/j.cemconcomp.2021.104155.
[37] C. Ziejewska, J. Marczyk, K. Korniejenko, et al., “3D Printing of Concrete-Geopolymer Hybrids”, Materials, vol. 15, no. 8, art. no. 2819, 2022, doi: 10.3390/ma15082819.
[38] S. Skibicki, M. Pułtorak, M. Kaszyńska, M. Hoffmann, E. Ekiert, and D. Sibera, “The effect of using recycled PET aggregates on mechanical and durability properties of 3D printed mortar”, Construction and Building Materials, vol. 335, 2022, doi: 10.1016/j.conbuildmat.2022.127443.
[39] M. Kaszyńska, S. Skibicki, and M. Hoffmann, “3D Concrete Printing for Sustainable Construction”, Energies, vol. 13, no. 23, art. no. 6351, 2020, doi: 10.3390/en13236351.
[40] I. Mai, L. Brohmann, N. Freund, et al., “Large Particle 3D Concrete Printing - A Green and Viable Solution”, Materials, vol. 14, no. 20, art. no. 6125, 2021, doi: 10.3390/ma14206125.
[41] S. Bhattacherjee, A.S. Basavaraj, A.V. Rahul, et al., “Sustainable materials for 3D concrete printing”, Cement and Concrete Composites, vol. 122, 2021, doi: 10.1016/j.cemconcomp.2021.104156.
[42] N.J. van Eck and L. Waltman, “VOSviewer Manual. Manual for VOSviewer version 1.6.20”, 31 October 2023. [Online]. Available: https://www.vosviewer.com/documentation/Manual_VOSviewer_1.6.20.pdf. [Accessed: 21. Nov. 2023].
[43] T. Mader, M. Schreter-Fleischhacker, O. Shkundalova, M. Neuner, G. Hofstetter, “Constitutive modeling of orthotropic nonlinear mechanical behavior of hardened 3D printed concrete”, Acta Mechanica, vol. 234, pp. 5893-5918, 2023, doi: 10.1007/s00707-023-03706-z.
[44] L. Jendele, J. Cervenka, and M. Herzfeldt, “FEM modelling of digitally printed concrete structures using 3D extrusion”, in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), September 2-4, 2019, Cape Town, South Africa, A. Zingoni, Ed. CRC Press, 2019, pp. 431-436, doi: 10.1201/9780429426506-77.
[45] G. Rizzieri, L. Ferrara, and M. Cremonesi, “Numerical simulation of the extrusion and layer deposition processes in 3D concrete printing with the Particle Finite Element Method”, Computational Mechanics, vol. 73, pp. 277-295, 2024, doi: 10.1007/s00466-023-02367-y.
[46] D. Kajzr, T. Myslivec, and J. Cernohorsky, “An Open PLC-Based Robot Control System for 3D Concrete Printing”, Robotics, vol. 12, no. 4, 2023, doi: 10.3390/robotics12040096.
[47] M. Hoffmann, S. Skibicki, P. Pankratow, A. Zieliński, M. Pajor, and M. Techman, “Automation in the Construction of a 3D-Printed Concrete Wall with the Use of a Lintel Gripper”, Materials, vol. 13, no. 8, 2020, doi: 10.3390/ma13081800.
[48] “Advanced Search”. [Online]. Available: https://patents.google.com/advanced. [Accessed: 21. Nov. 2023].
[49] “European Patent Register >Country codes”. [Online]. Available: https://register.epo.org/help?lng=en&topic=countrycodes. [Accessed: 21. Nov. 2023].
[50] “Visegrad Fund ->News”. [Online]. Available: https://www.visegradfund.org/news/visegrad-focus-researchdevelopment-innovation-digitalization/reg/. [Accessed: 13. Dec. 2023]
[51] “Interreg 2021-2027: Fostering Cooperation for a Stronger Europe”. [Online]. Available: https://interreg.eu/aboutinterreg/. [Accessed: 13. Dec. 2023].
Pobrania
Opublikowane
Jak cytować
Numer
Dział
