Vol. 68 No. 1 (2023)

Articles

• Anti-Seismic Behavior of Welded Box Section Column Considering Welding Residual Stress at High Temperature

  Yadi Fu, Xueyu Dai, Huidi Zhang, Yimin Wang

• Comparison of Wear Resistance in Polycrystalline and Monocrystalline Iron

  Zhiming Liu, Qiang Zhang, Fangying Liu, Hezhe Zhang

• Research on Fretting Fatigue of Tungsten Carbide Coating Based on Strain Energy Density Methods

  Xin Zeng, Xiaoxiao Wang, Xuecheng Ping, Renjie Wang, Tao Hu

• Microstructure and Micromechanical Behaviors of Bulk Amorphous Alloy Prepared by Spark Plasma Sintering

  Yaqiong Ge, Zexin Chang, Wenxian Wang, Qingling Hou

• Effect of Cooling Rate on the Microstructure and Mechanical Properties of Al-33 wt.% Cu Alloy

  Yeon-Joo Lee, Do-Hun Kwon, Eun-Ji Cha, Yong-Wook Song, Hyun-Joo Choi, Hwi-Jun Kim

• Densification and Magnetic Properties of Fe Powder Compacts According to Heat-Treatment Conditions

  Hyo-Sang Yoo, Yong-Ho Kim, Cheol-Woo Kim, Hyeon-Taek Son

• Fixed Bed System Packed with Porous Materials for Removal of Organic Dye from Wastewater

  Young-Sang Cho, Sohyeon Sung

• Controlling the State of Residual Stresses in Railway Rails by Modifying Pass Design of Straightening Rollers

  S. Żak, D. Woźniak

• Microstructure and Hardness of Cu-22Sn-xC Alloys Fabricated by Powder Metallurgy

  Gwanghun Kim, Jungbin Park, Seok-Jae Lee, Hee-Soo Kim

• Austenitic Stability and Strain-Induced Martensitic Transformation Behavior of Nanocrystalline FeNiCrMoC HSLA Steels

  Jungbin Park, Junhyub Jeon, Namhyuk Seo, Gwanghun Kim, Seung Bae Son, Jae-Gil Jung, Seok-Jae Lee

• Effect of Ball on SPS Characteristics of Ti-Al-Nd Powders Prepared by High Energy Ball Milling

  Hyunseung Lee, Hoseong Rhee, Sangsoo Lee, Si Young Chang

• Microstructures and Tensile Properties of Fe-Cr-Al Oxide Dispersion Strengthened Ferritic Alloys for High Temperature Service Components

  Minha Park, Jaeyoon Bae, Byung Jun Kim, Bu-An Kim, Sanghoon Noh

• Investigation of the Mechanical Properties of Calcium Treated Low Carbon Steel

  Barış Karabayrak, Sinem Baskut, Dilek Turan

• Effects of SPD by Biaxial Alternate Forging on the Tensile Properties and Microstructure of AZ31B Magnesium Alloy

  Young-Chul Shin, Seong-Ho Ha, Abdul Wahid Shah

• High Temperature Oxidation Property of Ni Based Superalloy CM247LC Produced Via Selective Laser Melting Process

  Jung-Uk Lee, Young-Kyun Kim, Seong-Moon Seo, Kee-Ahn Lee

• Effect of Microstructure and Mechanical Properties of Al 3003 Alloy Weld by Stationary Shoulder Friction Stir Welding Process

  Woo-Chul Jung, Joo-Heon Park, Sang-Min Yoon, Young Kyun Kim

• Effect of Post-Heat Treatment on the Impact Toughness and Crack Propagation Mechanism of AISI D2 Tool Steel Manufactured by Direct Energy Deposition

  Jung-Hyun Park, Kyu-Sik Kim, Yong-Mo Koo, Jin-Young Kim, Min-Chul Kim, Kee-Ahn Lee

• Applicability Study of Co and Eu Extraction Using Solvent from Ca Rich HCl Solution

  Maengkyo Oh, Keunyoung Lee, Richard I. Foster, Ik-Soo Kim, Chang-Ha Lee

• Properties of TiC-Mo 2C-WC-Ni Cermets by a High-Energy Ball Milling/Spark Plasma Sintering

  Jeong-Han Lee, Jae-Cheol Park, Hyun-Kuk Park

• Effect of Welding Conditions on Microstructural Evolution of Friction-Stir-Welded Ti-Cu Plate

  Yong-Jae Lee, Won-Ki Jeong, Seung-Jun Lee, Hidetoshi Fujii, Se Eun Shin, Dong-Geun Lee

• Structural Characterization and Properties of Al/Fe Multi-Layer Composites Produced by Hot Pressing

  W. Kowalski, H. Paul, I. Mania, P. Petrzak, P. Czaja, R. Chulist, A. Góral, M. Szlezynger

• Experimental Testing of Al-Si12/SiC Interpenetrating Composites (IPC) in Uniaxial Tension and Compression

  D. Pietras, T. Sadowski, M. Boniecki, E. Postek

• Surface Alloying of Cupronickel Alloy with Aluminum using Tungsten Inert Gas Process

  Fatemeh Koeini, Mahmoud Heydarzadeh Sohi, Parham Pirayesh

• Effect of Atmospheric-Pressure Gas-Plasma Treatment on Surface Properties of Hot-Dip Zn-Mg-Al Alloy-Coated Steel

  Chang-U Jeong, Jae-Hyeon Kim, Je-Shin Park, Min-Su Kim, Sung-Jin Kim, Min-Suk Oh

• Lithium-Ion Conductive Film Membrane of Li 0.3La 0.57TiO 2 Perovskite Structure and its Application in Li-Air Batteries

  C.K. Rhee, Y.B. Chun, S.H. Kang, W.W. Kim, G. Cao

• Material Production and the Effect of the System on Biocompatibility in the Modified Metal Injection Method

  Bünyamin Çiçek, Yavuz Sun

• A Study on the Recovery of Zinc and Pig Iron from Byproducts after Steelmaking Dust Treatment

  Jei-Pl Wang

• Development of High Entropy Alloy as Catalyst for Azo Dye Degradation in Fenton Process

  N.H.A. Hassan, N.S.M. Nasir, S.N.A. Rahman, A.R. Irfan, N.H. Nordin

• Magnetostrictive Functional Materials of Tb 0.27Dy 0.73(Fe 1−xAl x) 2 Series as Prospective Constituents of Magnetoelectric Composites

  B. Winiarska, P. Guzdek, J. Kuciakowski, W. Tokarz, M. Sikora, J. Pszczoła

• Influence of Acoustic Emission Signals and Damage Analysis During the Tensile Test on Al8011 Hybrid Composites by Stir Casting Method

  C.R. Kannan, S. Suresh, M. Navaneetha Krishnan

• Degradation Processes in Shield-Centring Elements of Surge Arresters

  P. Papliński, H. Śmietanka, P. Ranachowski, Z. Ranachowski, K. Wieczorek, S. Kudela Jr

• Characterization of SnO 2/TiO 2 with the Addition of Polyethylene Glycol via Sol-Gel Method for Self-Cleaning Application

  Dewi Suriyani Che Halin, A. Azliza, Kamrosni Abdul Razak, Mohd Mustafa Albakri Abdullah, Mohd Arif Anuar Mohd Salleh, Juyana A Wahab, V. Chobpattana, L. Kaczmarek, M. Nabiałek, B. Jeż

• Manufacture of Toughened Al 2O 3-Based Composites by the Combination of RBAO and SPS Processes

  Enrique Rocha-Rangel, Carlos A. Calles-Arriaga, Juan López-Hernández, José A. Rodríguez-García

• Effect of Boron Accompanied by Chromium, Vanadium and Titanium on the Transformation Temperatures of Low-Alloy Cast Steels

  B. Białobrzeska, R. Dziurka

• Study of Zeolite Phase Made from Rice Husk Ash and Sidrap Clay

  M. Armayani, Musdalifa Mansur, Reza Asra, Muh Irwan, Dhian Ramadhanty, Subaer Subaer, Mohd Mustafa Al Bakri Abdullah, Ikmal Hakem A. Aziz, B. Jeż, M. Nabiałek

• Interface Diffusion Behavior of Co40Al-X (X = Ni, Cr, Ti) System by Diffusion Multiple

  Hang Shang, Qiuzhi Gao, Yujiao Jiang, Qingshuang Ma, Huijun Li, Hailian Zhang

• Corrosion Protection of Selected Aluminum Wrought Alloys applied in the Automotive Industry

  K. Jakóbczak, R. Kowalik

• Research on Changes in Microstructures and Mechanical Properties of Welding Caps as a Result of their Usage During Resistance Spot Welding Process

  Z. Rdzawski, P. Kwaśniewski, W. Głuchowski, M. Łagoda, M. Maleta, S. Boczkal, K. Franczak

• Influence of Semisolid and Strontium Addition on Dry Sliding Wear Behavior of Hypoeutectic Al-Si Alloy

  N.M. Anas, S.A. Zakaria, A.S. Anasyida, H. Mohamad, B.K. Dhindaw

• Crystal Lattice Rotations Induced by Shear Banding in fcc Metals Deformed at High Strain Rates

  I. Mania, H. Paul, R. Chulist, P. Petrzak, M. Miszczyk, M. Prażmowski

• Thermodynamic Phase Diagram and Phonon stability, Electronic and Optical Properties of FeVSb: A DFT study

  A. Bagheri, A. Boochani, S.R. Masharian, F.H. Jafarpour

• The Effect of the Parameters of Robotic TIG Welding on the Microstructure of 17-4PH Stainless Steel Welded Joint

  A. Nalborczyk-Kazanecka, G. Mrowka-Nowotnik

• Microalloying of Continuous Cast Aluminum Strip and Structural Modification Using Plastic Treatment to a 9 μm Foil (Patent no. 39762, P-377/76)

  M.M. Purenović, J.M. Purenović, J.Č. Baralić

• The Method of Inoculation of High-Quality Grey Cast Iron Intended for Massive Castings for Bottom and Distance Plates as Well Counterweights Manufactured as Vertical Castings

  Edward Guzik, D. Kopyciński, A. Ziółko, A. Szczęsny

• Effect of Composition on Melt Flow and Density of Polypropylene Copolymer/Kaolin Geo-Filler Composites

  Zulaikha Zulkifli, Yusrina Mat Daud, Farah Farhana Zainal, Mohammad Firdaus Abu Hashim, Yurdakul Aygörmez

• Electrochemical Method of Copper Powder Synthesis on Rotating Electrode in the Presence of Surfactants

  K. Wojtaszek, F. Cebula, B. Partyka, P. Deszcz, G. Włoch, R.P. Socha, K. Woźny, P. Żabiński, M. Wojnicki

• Columnar Dendrite Morphology and Solute Concentration of GH3039 Nickel-Based Superalloys during Wire and Laser Additive Manufacturing: Insights from Phase Field Simulations

  Nanfu Zong, Zheng Wang, Yang LIU, Xinghong Liang, Tao Jing

• The Phenomenon of Hydrogen Embrittlement in High-Strength Bolts

  T. Dubiel, T. Balawender, M. Osetek