Investigation of HgCdTe avalanche photodiodes for HOT condition

Authors

  • Tetiana Manyk Institute of Applied Physics, Military University of Technology, ul. Kaliskiego 2, 00-908 Warsaw, Poland https://orcid.org/0000-0003-4362-4203
  • Jan Sobieski Institute of Applied Physics, Military University of Technology, ul. Kaliskiego 2, 00-908 Warsaw, Poland; Vigo Photonics S.A., ul. Poznanska 129/133, 05-850 Ożarów Mazowiecki, Poland https://orcid.org/0000-0002-7175-4585
  • Kacper Matuszelański Vigo Photonics S.A., ul. Poznanska 129/133, 05-850 Ożarów Mazowiecki, Poland
  • Jarosław Rutkowski Institute of Applied Physics, Military University of Technology, ul. Kaliskiego 2, 00-908 Warsaw, Poland https://orcid.org/0000-0002-9092-755X
  • Piotr Martyniuk Institute of Applied Physics, Military University of Technology, ul. Kaliskiego 2, 00-908 Warsaw, Poland https://orcid.org/0000-0003-1963-3521

DOI:

https://doi.org/10.24425/bpasts.2024.149173

Abstract

The performance of long-wave infrared (LWIR) �� = 0.22 HgCdTe avalanche photodiodes (APDs) was presented. The dark currentvoltage characteristics at temperatures 200 K, 230 K, and 300 K were measured and numerically simulated. Theoretical modeling was performed by the numerical Apsys platform (Crosslight). The effects of the tunneling currents and impact ionization in HgCdTe APDs were calculated. Dark currents exhibit peculiar features which were observed experimentally. The proper agreement between the theoretical and experimental characteristics allowed the determination that the material parameters of the absorber were reached. The effect of the multiplication layer profile on the detector characteristics was observed but was found to be insignificant.

Downloads

Published

2024-04-30

How to Cite

Manyk, Tetiana, et al. “Investigation of HgCdTe Avalanche Photodiodes for HOT Condition”. Bulletin of the Polish Academy of Sciences Technical Sciences, vol. 72, no. 3, Apr. 2024, p. e149173, doi:10.24425/bpasts.2024.149173.

Issue

Section

Articles