Influence of material distribution and damping on the dynamic stability of Bernoulli-Euler beams

Sebastian Garus; Justyna Garus; Wojciech Sochacki; Marcin Nabiałek; Jana Petru; Wojciech Borek; Michal Šofer; Paweł Kwiatoń

doi:10.24425/bpasts.2023.145567

Authors

Sebastian Garus Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, Poland https://orcid.org/0000-0002-6649-5435
Justyna Garus Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, Poland https://orcid.org/0000-0001-8001-2113
Wojciech Sochacki Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, Poland https://orcid.org/0000-0002-2764-6480
Marcin Nabiałek Faculty of Production Engineering and Materials Technology, Department of Physics, Czestochowa University of Technology, Armii Krajowej 19, 42-201 Czestochowa, Poland https://orcid.org/0000-0001-6585-3918
Jana Petru Department of Machining, Assembly and Engineering Metrology, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, 70833 Ostrava, Czech Republic https://orcid.org/0000-0002-2378-5678
Wojciech Borek Department of Engineering Materials and Biomaterials, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland https://orcid.org/0000-0002-8292-4332
Michal Šofer Department of Applied Mechanics, Faculty of Mechanical Engineering, VSB—Technical University of Ostrava, 17. listopadu 2172/15, 70800 Ostrava, Czech Republic https://orcid.org/0000-0002-9253-5760
Paweł Kwiatoń Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, Poland https://orcid.org/0000-0002-0067-0384

DOI:

https://doi.org/10.24425/bpasts.2023.145567

Keywords

mechanical vibrations, damping, beam, dynamic stability, Mathieu equation

Abstract

The study analyzed the influence of materials and different types of damping on the dynamic stability of the Bernoulli-Euler beam. Using the mode summation method and applying an orthogonal condition of eigenfunctions and describing the analyzed system with the Mathieu equation, the problem of dynamic stability was solved. By examining the influence of internal and external damping and damping in the beam supports, their influence on the regions of stability and instability of the solution to the Mathieu equation was determined.

Influence of material distribution and damping on the dynamic stability of Bernoulli-Euler beams

Authors

DOI:

Keywords

Abstract

Downloads

Published

How to Cite

Issue

Section

License

Similar Articles

Make a Submission

Information

Indexing and Metrics

Similar Articles

The influence of damping on the dynamic stability of complex mechanical systems, as exemplified by a truck crane

Application of high-speed camera measurements for determination of energy losses generated in a vibrating belt of CVT transmission

Innovative design of experimental blade cascad model for in-depth analysis of stall flutter

Suppression of rotating machine shaft-line torsional vibrations by a driving asynchronous motor using two advanced control methods

Effects of ageing heat treatment temperature on the properties of DMLS additive manufactured 17-4PH steel

Fixed switching frequency model predictive control and passivity based control for DC-DC converter

An assessment of the intensity of extension-bending coupling and its effect on the stability of a thin laminate plate

Numerical investigation of rotor-bearing systems with fractional derivative material damping models

GTC-DAN: A graph-temporal convolutional model with dynamic adjacency for vehicle trajectory prediction

Mechanical energy absorption capacity of the porous Ti-6AI-4V alloy under quasi-static and dynamic compression

Influence of material distribution and damping on the dynamic stability of Bernoulli-Euler beams

Authors

DOI:

Keywords

Abstract

Downloads

Published

How to Cite

Issue

Section

License

Similar Articles

Make a Submission

Information

Indexing and Metrics

policy Privacy Policy