Computational prediction of packed-bed reactor performance for hexavalent chromium removal from aqueous solution

Authors

  • Rodrigo Ortega-Toro Universidad de Cartagena, Department of Food Engineering, Consulate Avenue, 30th Street, n° 48-152, 130015, Cartagena de Indias, Colombia https://orcid.org/0000-0003-0815-5317
  • Candelaria N. Tejada-Tovar Universidad de Cartagena, Department of Chemical Engineering, Consulate Avenue, 30th Street, n° 48-152, 130015, Cartagena de Indias, Colombia https://orcid.org/0000-0002-2323-1544
  • Ángel Villabona-Ortiz Universidad de Cartagena, Department of Chemical Engineering, Consulate Avenue, 30th Street, n° 48-152, 130015, Cartagena de Indias, Colombia https://orcid.org/0000-0001-8488-1076
  • Ángel D. González-Delgado Universidad de Cartagena, Department of Chemical Engineering, Consulate Avenue, 30th Street, n° 48-152, 130015, Cartagena de Indias, Colombia https://orcid.org/0000-0001-8100-8888
  • Juan C. Vergara-Villadiego Universidad de Cartagena, Department of Chemical Engineering, Consulate Avenue, 30th Street, n° 48-152, 130015, Cartagena de Indias, Colombia https://orcid.org/0009-0002-4839-2114

DOI:

https://doi.org/10.24425/jwld.2025.155296

Abstract

Adsorption is a surface-based process employed for the removal of contaminants. The process uses organic materials as bioadsorbents. Most adsorption studies have been conducted at the laboratory scale; therefore, few studies have aimed to predict process behaviour and the efficiency of bioadsorbents at an industrial scale. Therefore, the objective of this study is to model a column for the removal of hexavalent chromium from aqueous solution using cocoa residues as an adsorbent material on an industrial scale. To this end, Aspen Adsorption was used to stimulate the column at large scale, evaluating the effects of variations in the inlet flow rate, bed height, and initial concentration of Cr(VI) on the adsorption. The Langmuir and Freundlich isotherm models were applied, with the linear driving force (LDF) used as the kinetic model. The results showed removal efficiencies of up to 94.73% for the Langmuir-LDF model and up to 95.85% for the Freundlich-LDF model. The adsorption column simulation conditions that yielded the best results for both models included a bed height of 5 m, an initial concentration of Cr(VI) of 5,000 mg∙dm-3, and an inlet flow rate to the adsorption column of 100 m3∙day-1. This study represents as a novel approach within the field of engineering, demonstrating how computational tools can effectively predict the performance of adsorption columns packed with organic waste-based biomasses.

References

Babuji, P. et al. (2023) “Human health risks due to exposure to water pollution: A review,” Water, 15(14), 2532. Available at: https://doi.org/10.3390/W15142532.

Das, P.P., Sharma, M. and Purkait, M.K. (2022) “Recent progress on electrocoagulation process for wastewater treatment: A review,” Separation and Purification Technology, 292, 121058. Available at: https://doi.org/10.1016/J.SEPPUR.2022.121058.

Durán, I., Rubiera, F. and Pevida, C. (2022) “Modeling a biogas upgrading PSA unit with a sustainable activated carbon derived from pine sawdust. Sensitivity analysis on the adsorption of CO2 and CH4 mixtures,” Chemical Engineering Journal, 428, 132564. Available at: https://doi.org/10.1016/j.cej.2021.132564.

Fouad, M.R. (2023) “Physical characteristics and Freundlich model of adsorption and desorption isotherm for fipronil in six types of Egyptian soil,” Current Chemistry Letters, 12(1), pp. 207–216. Available at: https://doi.org/10.5267/j.ccl.2022.8.003.

Genawi, N.M. et al. (2020) “Chromium removal from tannery wastewater by electrocoagulation: Optimization and sludge characterization,” Water, 12(5), 1374. Available at: https://doi.org/10.3390/W12051374.

Gupta, B. et al. (2021) “Fabrication of calcite based biocomposites for catalytic removal of heavy metals from electroplating industrial effluent,” Environmental Technology and Innovation, 21, 101278. Available at: https://doi.org/10.1016/j.eti.2020.101278.

NU (2018) La Agenda 2030 y los Objetivos de Desarrollo Sostenible: Una oportunidad para América Latina y el Caribe [The 2030 Agenda and the Sustainable Development Goals: An opportunity for Latin America and the Caribbean]. Santiago: Naciones Unidas. Available at: www.issuu.com/publicacionescepal/stacks (Accessed: January 28, 2025).

Pandiyan, J. et al. (2021) “An assessment of level of heavy metals pollution in the water, sediment and aquatic organisms: A perspective of tackling environmental threats for food security,” Saudi Journal of Biological Sciences, 28(2), pp. 1218–1225. Available at: https://doi.org/10.1016/j.sjbs.2020.11.072.

Patel, H. (2020) “Batch and continuous fixed bed adsorption of heavy metals removal using activated charcoal from neem (Azadirachta indica) leaf powder,” Scientific Reports, 10(1), 16895. Available at: https://doi.org/10.1038/s41598-020-72583-6.

Pooja, G., Kumar, P.S. and Indraganti, S. (2022) “Recent advancements in the removal/recovery of toxic metals from aquatic system using flotation techniques,” Chemosphere, 287, 132231. Available at: https://doi.org/10.1016/J.CHEMOSPHERE.2021.132231.

Ronda, A. et al. (2018) “Scale-up of a packed bed column for wastewater treatment,” Water Science and Technology, 77(5), pp. 1386–1396. Available at: https://doi.org/10.2166/WST.2018.020.

Selimin, M.A. et al. (2021) “Adsorption efficiency of banana blossom peels (Musa acuminata Colla) adsorbent for chromium (VI) removal,” Materials Today: Proceedings, 57(3), pp. 1262–1268. Available at: https://doi.org/10.1016/J.MATPR.2021.10.502.

Sharma, P. et al. (2022) “Health hazards of hexavalent chromium (Cr (VI)) and its microbial reduction,” Bioengineered, 13(3), pp. 4923–4938. Available at: https://doi.org/10.1080/21655979.2022.2037273.

Sultana, S. et al. (2022) “Adsorption of crystal violet dye by coconut husk powder: Isotherm, kinetics and thermodynamics perspectives,” Environmental Nanotechnology, Monitoring and Management, 17, 100651. Available at: https://doi.org/10.1016/j.enmm.2022.100651.

Upadhyay, U. et al. (2021) “Process optimization at an industrial scale in the adsorptive removal of Cd2+ ions using Dolochar via response surface methodology,” Environmental Science and Pollution Research, 30, pp. 8403–8415. Available at: https://doi.org/10.1007/s11356-021-17216-9.

Villabona-Ortíz, A., González-Delgado, Á. and Tejada-Tovar, C. (2022) “Equilibrium, kinetics and thermodynamics of chromium (VI) adsorption on inert biomasses of Dioscorea rotundata and Elaeis guineensis,” Water, 14(6), 844. Available at: https://doi.org/10.3390/W14060844.

Villabona-Ortíz, A., González-Delgado, Á.D. and Tejada-Tovar, C. (2022) “Evaluation of kinetic, equilibrium and thermodynamics of cationic ion using agro-industrial residues of plantain (Musa paradisiaca),” Water, 14(9), 1383. Available at: https://doi.org/10.3390/W14091383.

Villabona-Ortiz, Á., Tejada-Tovar, C. and Gonzáles-Delgado, Á.D. (2021) “Adsorption of Cd2+ ions from aqueous solution using biomasses of Theobroma cacao, Zea mays, Manihot esculenta, Dioscorea rotundata and Elaeis guineensis,” Applied Sciences, 11(6), 2657. Available at: https://doi.org/10.3390/APP11062657.

Downloads

Published

2025-06-30

How to Cite

Ortega-Toro, Rodrigo, et al. “Computational Prediction of Packed-Bed Reactor Performance for Hexavalent Chromium Removal from Aqueous Solution”. Journal of Water and Land Development, vol. 66, no. 66, June 2025, pp. 13-18, doi:10.24425/jwld.2025.155296.

Issue

Section

Articles

Similar Articles

<< < 14 15 16 17 18 19 20 21 22 23 > >> 

You may also start an advanced similarity search for this article.