Behaviour of High-density Aluminium Briquette During Melting in Laboratory Conditions
DOI:
https://doi.org/10.24425/afe.2025.153791Abstract
The aluminium industry is one of the most energy-intensive industrial fields and is associated with severe environmental impact mainly due to GHG emissions. Aluminium recycling is one of the best ways to eliminate this impact and to achieve better economic viability of aluminium production. Piece size and contamination of aluminium scrap are two of the most important factors that affect recyclability of aluminium and its alloys. Scrap with large piece size is relatively easy to recycle because it is associated with lower metal loss and fewer undesired inclusions introduced into the molten metal during remelting. Unfortunately, a large portion of scrap generated by industrial sector and by end-users is of small piece size. Despite its high importance, recycling of these types of scrap is often overlooked by contemporary literature. The aim of this work is to describe melting behaviour of high-density aluminium briquette prepared from thin aluminium foils and to provide metallographic observation of inclusions introduced into the molten metal during melting of the briquette. Melting is performed in laboratory conditions. The inclusions are analysed using optical microscopy in combination with SEM and EDX analysis. The results indicates that despite fast immersion of aluminium briquette, high portion of oxide films were introduced into the melt. Carbide like particles were also observed in microstructure, probably as a result of burning of organic contamination of the briquette. However, melting process in real industrial conditions differs from laboratory experiment which is a topic for further study.References
[1] Raabe, D., Ponge, D., Uggowitzer, P.J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., de Geuser, F., Deschamps, A., Hutchinson., C., Liu, C., Lim Z., Prangnell, P., Robson, J., Shanthraj, P., Vakili, S., Sinclair, C. & Pogatscher, S. (2022). Making sustainable aluminum by recycling scrap: The science of “dirty” alloys. Progress in materials science. 128, 100947, 1-150. https://doi.org/10.1016/j.pmatsci.2022.100947.
[2] Brough, D. & Jouhara, H. (2020). The aluminium industry: A review on state-of-the-art technologies, environmental impacts and possibilities for waste heat recovery. International Journal of Thermofluids. 1, 100007, 1-39. https://doi.org/10.1016/j.ijft.2019.100007.
[3] Green, J.A. (2007). Aluminum recycling and processing for energy conservation and sustainability. ASM International.
[4] Vallejo-Olivares, A., Philipson, H., Gökelma, M., Roven, H. J., Furu, T., Kvithyld, A. & Tranell, G. (2021). Compaction of aluminium foil and its effect on oxidation and recycling yield. In Light Metals 2021: 50th Anniversary Edition (pp. 735-741). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-030-65396-5_96.
[5] Gaustad, G., Olivetti, E. & Kirchain, R. (2012). Improving aluminum recycling: A survey of sorting and impurity removal technologies. Resources, Conservation and Recycling. 58, 79-87. https://doi.org/10.1016/j.resconrec.2011.10.010.
[6] Padamata, S.K., Yasinskiy, A. & Polyakov, P. (2021). A review of secondary aluminum production and its byproducts. The journal of the Minerals, Metals and Materials Society. 73(9), 2603-2614. https://doi.org/10.1007/s11837-021-04802-y.
[7] Niero, M. & Olsen, S. I. (2016). Circular economy: To be or not to be in a closed product loop? A Life Cycle Assessment of aluminium cans with inclusion of alloying elements. Resources, Conservation and Recycling. 114, 18-31. https://doi.org/10.1016/j.resconrec.2016.06.023.
[8] Windmark, C., Lattanzi, L., Månberger, A. & Jarfors, A.E. (2022). Investigation on resource-efficient aluminium recycling–a state of the art review. SPS2022. 15-27.
[9] Xiao, Y., Reuter, M., Vonk, P., Vonken, J., Orbon, H., Probst, T. & Boin, U. (2000). Experimental study on aluminium scrap recycling. In Stewart Jr., DL, Daley, JC and Stephens (Eds.), Proceedings of the Fourth International Symposium on Recycling of Metals and Engineered Materials. Eds., (pp. 22-25).
[10] Xiao, Y., Reuter, M. A. & Boin, U.D.O. (2005). Aluminium recycling and environmental issues of salt slag treatment. Journal of Environmental Science and Health. 40(10), 1861-1875. https://doi.org/10.1080/10934520500183824.
[11] Yang, Y., Xiao, Y., Zhou, B. & Reuter, M.A. (2005). Aluminium recycling: scrap melting and process simulation. Sustainable developments in metals processing, 251-264.
[12] Engelen, B., De Marelle, D., Diaz-Romero, D.J., Van den Eynde, S., Zaplana, I., Peeters, J.R. & Kellens, K. (2022). Techno-economic assessment of robotic sorting of aluminium scrap. Procedia CIRP. 105, 152-157. https://doi.org/10.1016/j.procir.2022.02.026.
[13] Mashhadi, H.A., Moloodi, A., Golestanipour, M. & Karimi, E.Z.V. (2009). Recycling of aluminium alloy turning scrap via cold pressing and melting with salt flux. Journal of Materials Processing Technology. 209(7), 3138-3142. https://doi.org/10.1016/j.jmatprotec.2008.07.020.
[14] Puga, H., Barbosa, J., Soares, D., Silva, F. & Ribeiro, S. (2009). Recycling of aluminium swarf by direct incorporation in aluminium melts. Journal of Materials Processing Technology. 209(11), 5195-5203. https://doi.org/10.1016/j.jmatprotec.2009.03.007.
[15] Xiao, Y. & Reuter, M.A. (2002). Recycling of distributed aluminium turning scrap. Minerals engineering. 15(11), 963-970. https://doi.org/10.1016/S0892-6875(02)00137-1.
[16] Babailov, N.A., Loginov, Y.N., Polyanskii, L.I. & Pervukhina, D.N. (2018). Roll briquetting for recycling of aluminum wire. Metallurgist. 62, 717-722. https://doi.org/10.1007/s11015-018-0713-z.
[17] Borge, G., Cooper, P.S. & Thistlethwaite, S.R. (2000). Review of dissolution testing and alloying methods in the casthouse. Continuous Casting. 33-39. https://doi.org/10.1002/3527607331.ch5.
[18] Majer, M. & Machac, J. (2019). Review of aluminum chips recycling. International Multidisciplinary Scientific GeoConference: SGEM. 19(4.1), 771-778. DOI: 10.5593/sgem2019/4.1/S18.098.
[19] Zagirov, N.N., Loginov, Y.N., Ivanov, E.V. & Galiev, R.I. (2022). Approval of a method for processing aluminum alloy waste cans using a combined rolling and pressing method. Metallurgist. 66(3), 343-348. https://doi.org/10.1007/s11015-022-01334-x.
[20] Assael, M.J., Kakosimos, K., Banish, R.M., Brillo, J., Egry, I., Brooks, R., Quested, P.N., mills, K.C., Nagashima, A., Sato, Y. & Wakeham, W.A. (2006). Reference data for the density and viscosity of liquid aluminum and liquid iron. Journal Of Physical And Chemical Reference Data. 35(1), 285-300. https://doi.org/10.1063/1.2149380.
[21] Palimąka, P. (2020). Thermal cleaning and melting of fine aluminium alloy chips. Archives of Foundry Engineering. 20(4), 91-96. DOI: 10.24425/afe.2020.133353.
[22] Vallejo-Olivares, A., Gertjegerdes, T., Høgåsen, S., Friedrich, B. & Tranell, G. (2023). Effects of compaction and thermal pre-treatments on generation of dross and off-gases in aluminium recycling. Journal of Sustainable Metallurgy. 10, 69-82. https://doi.org/10.1007/s40831-023-00773-3.
